On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote: > Signed-off-by: Eric Engestrom <e...@engestrom.ch>
Applied, thanks. Rob > --- > Documentation/devicetree/bindings/input/ads7846.txt | 2 +- > Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/ads7846.txt > b/Documentation/devicetree/bindings/input/ads7846.txt > index c6cfe2e..9fc47b0 100644 > --- a/Documentation/devicetree/bindings/input/ads7846.txt > +++ b/Documentation/devicetree/bindings/input/ads7846.txt > @@ -29,7 +29,7 @@ Optional properties: > ti,vref-delay-usecs vref supply delay in usecs, 0 for > external vref (u16). > ti,vref-mv The VREF voltage, in millivolts (u16). > - Set to 0 to use internal refernce > + Set to 0 to use internal references > (ADS7846). > ti,keep-vref-on set to keep vref on for differential > measurements as well > diff --git > a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > index cdf05f9..abfcab3 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > @@ -15,7 +15,7 @@ Optional properties: > - fsl,pen-debounce-ns: Pen debounce time in nanoseconds. > - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value > between 1 and 4096. It is the ratio between the internal reference voltage > - and the measured voltage after the plate was precharged. Resistence > between > + and the measured voltage after the plate was precharged. Resistance > between > plates and therefore the voltage decreases with pressure so that a smaller > value is equivalent to a higher pressure. > - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is > before > -- > 2.8.0 >
