On 13/04/16 20:01, Crestez Dan Leonard wrote:
> Device is an integrated gyro/accel/magn and temperature sensor. The
> device has two i2c/spi interfaces: one for the gyro and one for the
> accel/magn/temp sensor.
>
> Datasheet: http://www2.st.com/resource/en/datasheet/lsm9ds0.pdf
>
> The patch uses existing iio st_sensor infrastructure and just adds a
> bunch of new device IDs and the new register mappings.
>
> Temperature support is not included.
>
> Signed-off-by: Crestez Dan Leonard <leonard.cres...@intel.com>
This looks fine to me. Needs acks from Denis though.
Also, clearly your questions need addressing.
> ---
>
> I tested basic reading of values using software triggers and i2c and the
> values
> seems plausible.
>
> I tested lsm9ds0-accel and lsm9ds0-magn separately because I don't know how to
> instantiate two iio drivers for the same I2C device using devicetree. Can you
> provide a sample of this or is this not currently supported?
>
> It seems to me that the LSM303AGR device has the same problem: it's an
> accel+magn combo behind a single I2C address. How is that supposed to be
> instantiated? Other supported combo devices seem to have multiple I2C
> addresses.
Excellent question. I'd not picked up on this before.
It could be done with a 'dummy mux' I guess though that's messy.
Guiseppe how are you doing it for the lsm303agr?
Cc'd Peter Rosin who has kindly walked into maintainer I2C mux
support recently ;) An Wolfram for obvious reasons..
To bring you two up to date, we have effectively two separate devices
(very nearly) sat behind a single i2c address. They have non overlapping
register maps.
We have a big overarching st_sensors driver framework which contains numerous
examples of parts with just a magnetometer or just an accelerometer but in this
case they have combined these two. It would be nice to reuse the infrastructure
without having to have a separate version for the two cases that exist so far.
I suppose such a separate handling wouldn't be too terrible if we have to do it
though - just a new device implementation of magnaccel for the st-sensors.
>
> It's also not clear how to properly deal with bits shared between the accel
> and
> magn part like "block data update" or "interrupt polarity".
Perhaps just document that it's not allowed to have different choices for them
in the bindings?
Jonathan
>
> .../devicetree/bindings/iio/st-sensors.txt | 3 +
> drivers/iio/accel/st_accel.h | 1 +
> drivers/iio/accel/st_accel_core.c | 122 ++++++++++++++++++++
> drivers/iio/accel/st_accel_i2c.c | 5 +
> drivers/iio/accel/st_accel_spi.c | 1 +
> drivers/iio/gyro/st_gyro.h | 1 +
> drivers/iio/gyro/st_gyro_core.c | 1 +
> drivers/iio/gyro/st_gyro_i2c.c | 5 +
> drivers/iio/gyro/st_gyro_spi.c | 1 +
> drivers/iio/magnetometer/st_magn.h | 1 +
> drivers/iio/magnetometer/st_magn_core.c | 123
> +++++++++++++++++++++
> drivers/iio/magnetometer/st_magn_i2c.c | 5 +
> drivers/iio/magnetometer/st_magn_spi.c | 1 +
> 13 files changed, 270 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt
> b/Documentation/devicetree/bindings/iio/st-sensors.txt
> index 71b7bdf..65339ef 100644
> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
> @@ -38,6 +38,7 @@ Accelerometers:
> - st,lsm303agr-accel
> - st,lis2dh12-accel
> - st,h3lis331dl-accel
> +- st,lsm9ds0-accel
>
> Gyroscopes:
> - st,l3g4200d-gyro
> @@ -47,6 +48,7 @@ Gyroscopes:
> - st,l3gd20-gyro
> - st,l3g4is-gyro
> - st,lsm330-gyro
> +- st,lsm9ds0-gyro
>
> Magnetometers:
> - st,lsm303agr-magn
> @@ -54,6 +56,7 @@ Magnetometers:
> - st,lsm303dlhc-magn
> - st,lsm303dlm-magn
> - st,lis3mdl-magn
> +- st,lsm9ds0-magn
>
> Pressure sensors:
> - st,lps001wp-press
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index 57f83a6..e90cd6a 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -29,6 +29,7 @@
> #define LSM330_ACCEL_DEV_NAME "lsm330_accel"
> #define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
> #define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
> +#define LSM9DS0_ACCEL_DEV_NAME "lsm9ds0_accel"
>
> /**
> * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c
> b/drivers/iio/accel/st_accel_core.c
> index fee32e3..0941b46 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -211,6 +211,50 @@
> #define ST_ACCEL_6_IHL_IRQ_MASK 0x80
> #define ST_ACCEL_6_MULTIREAD_BIT true
>
> +/* CUSTOM VALUES FOR SENSOR 7 */
> +#define ST_ACCEL_7_WAI_EXP 0x49
> +#define ST_ACCEL_7_ODR_ADDR 0x20
> +#define ST_ACCEL_7_ODR_MASK 0xf0
> +#define ST_ACCEL_7_ODR_AVL_3HZ_VAL 0x01
> +#define ST_ACCEL_7_ODR_AVL_6HZ_VAL 0x02
> +#define ST_ACCEL_7_ODR_AVL_12HZ_VAL 0x03
> +#define ST_ACCEL_7_ODR_AVL_25HZ_VAL 0x04
> +#define ST_ACCEL_7_ODR_AVL_50HZ_VAL 0x05
> +#define ST_ACCEL_7_ODR_AVL_100HZ_VAL 0x06
> +#define ST_ACCEL_7_ODR_AVL_200HZ_VAL 0x07
> +#define ST_ACCEL_7_ODR_AVL_400HZ_VAL 0x08
> +#define ST_ACCEL_7_ODR_AVL_800HZ_VAL 0x09
> +#define ST_ACCEL_7_ODR_AVL_1600HZ_VAL 0x0a
> +#define ST_ACCEL_7_FS_ADDR 0x21
> +#define ST_ACCEL_7_FS_MASK 0x38
> +#define ST_ACCEL_7_FS_AVL_2_VAL 0x00
> +#define ST_ACCEL_7_FS_AVL_4_VAL 0x01
> +#define ST_ACCEL_7_FS_AVL_6_VAL 0x02
> +#define ST_ACCEL_7_FS_AVL_8_VAL 0x03
> +#define ST_ACCEL_7_FS_AVL_16_VAL 0x04
> +#define ST_ACCEL_7_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
> +#define ST_ACCEL_7_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
> +#define ST_ACCEL_7_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
> +#define ST_ACCEL_7_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
> +#define ST_ACCEL_7_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
> +#define ST_ACCEL_7_BDU_ADDR 0x20
> +#define ST_ACCEL_7_BDU_MASK 0x08
> +#define ST_ACCEL_7_DRDY_IRQ_ADDR 0x22
> +#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK 0x04
> +/* INT2 is actually at another address. Not supported by driver */
> +/*
> +#define ST_ACCEL_7_DRDY_IRQ_INT2_ADDR 0x23
> +#define ST_ACCEL_7_DRDY_IRQ_INT2_MASK 0x08
> + */
> +/* Common to magnetometer so not supported */
> +/*
> +#define ST_ACCEL_7_IHL_IRQ_ADDR 0x12
> +#define ST_ACCEL_7_IHL_IRQ_MASK 0x80
> + */
> +#define ST_ACCEL_7_IG1_EN_ADDR 0x22
> +#define ST_ACCEL_7_IG1_EN_MASK 0x20
> +#define ST_ACCEL_7_MULTIREAD_BIT true
> +
> static const struct iio_chan_spec st_accel_8bit_channels[] = {
> ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
> BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> @@ -649,6 +693,84 @@ static const struct st_sensor_settings
> st_accel_sensors_settings[] = {
> .multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
> .bootime = 2,
> },
> + {
> + .wai = ST_ACCEL_7_WAI_EXP,
> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> + .sensors_supported = {
> + [0] = LSM9DS0_ACCEL_DEV_NAME,
> + },
> + .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
> + .odr = {
> + .addr = ST_ACCEL_7_ODR_ADDR,
> + .mask = ST_ACCEL_7_ODR_MASK,
> + .odr_avl = {
> + { 3, ST_ACCEL_7_ODR_AVL_3HZ_VAL },
> + { 6, ST_ACCEL_7_ODR_AVL_6HZ_VAL, },
> + { 12, ST_ACCEL_7_ODR_AVL_12HZ_VAL, },
> + { 25, ST_ACCEL_7_ODR_AVL_25HZ_VAL, },
> + { 50, ST_ACCEL_7_ODR_AVL_50HZ_VAL, },
> + { 100, ST_ACCEL_7_ODR_AVL_100HZ_VAL, },
> + { 200, ST_ACCEL_7_ODR_AVL_200HZ_VAL, },
> + { 400, ST_ACCEL_7_ODR_AVL_400HZ_VAL, },
> + { 800, ST_ACCEL_7_ODR_AVL_800HZ_VAL, },
> + { 1600, ST_ACCEL_7_ODR_AVL_1600HZ_VAL, },
> + },
> + },
> + .pw = {
> + .addr = ST_ACCEL_7_ODR_ADDR,
> + .mask = ST_ACCEL_7_ODR_MASK,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .enable_axis = {
> + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
> + .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> + },
> + .fs = {
> + .addr = ST_ACCEL_7_FS_ADDR,
> + .mask = ST_ACCEL_7_FS_MASK,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = ST_ACCEL_7_FS_AVL_2_VAL,
> + .gain = ST_ACCEL_7_FS_AVL_2_GAIN,
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = ST_ACCEL_7_FS_AVL_4_VAL,
> + .gain = ST_ACCEL_7_FS_AVL_4_GAIN,
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_6G,
> + .value = ST_ACCEL_7_FS_AVL_6_VAL,
> + .gain = ST_ACCEL_7_FS_AVL_6_GAIN,
> + },
> + [3] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = ST_ACCEL_7_FS_AVL_8_VAL,
> + .gain = ST_ACCEL_7_FS_AVL_8_GAIN,
> + },
> + [4] = {
> + .num = ST_ACCEL_FS_AVL_16G,
> + .value = ST_ACCEL_7_FS_AVL_16_VAL,
> + .gain = ST_ACCEL_7_FS_AVL_16_GAIN,
> + },
> + },
> + },
> + .bdu = {
> + .addr = ST_ACCEL_7_BDU_ADDR,
> + .mask = ST_ACCEL_7_BDU_MASK,
> + },
> + .drdy_irq = {
> + .addr = ST_ACCEL_7_DRDY_IRQ_ADDR,
> + .mask_int1 = ST_ACCEL_7_DRDY_IRQ_INT1_MASK,
> + .ig1 = {
> + .en_addr = ST_ACCEL_7_IG1_EN_ADDR,
> + .en_mask = ST_ACCEL_7_IG1_EN_MASK,
> + },
> + },
> + .multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
> + .bootime = 2,
> + },
> };
>
> static int st_accel_read_raw(struct iio_dev *indio_dev,
> diff --git a/drivers/iio/accel/st_accel_i2c.c
> b/drivers/iio/accel/st_accel_i2c.c
> index 7333ee9..7a2a3ab 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -80,6 +80,10 @@ static const struct of_device_id st_accel_of_match[] = {
> .compatible = "st,h3lis331dl-accel",
> .data = H3LIS331DL_DRIVER_NAME,
> },
> + {
> + .compatible = "st,lsm9ds0-accel",
> + .data = LSM9DS0_ACCEL_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -130,6 +134,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> { LSM330_ACCEL_DEV_NAME },
> { LSM303AGR_ACCEL_DEV_NAME },
> { LIS2DH12_ACCEL_DEV_NAME },
> + { LSM9DS0_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> diff --git a/drivers/iio/accel/st_accel_spi.c
> b/drivers/iio/accel/st_accel_spi.c
> index fcd5847..2fc32c92f 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -59,6 +59,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> { LSM330_ACCEL_DEV_NAME },
> { LSM303AGR_ACCEL_DEV_NAME },
> { LIS2DH12_ACCEL_DEV_NAME },
> + { LSM9DS0_ACCEL_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
> diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
> index 5353d63..a5c5c4e 100644
> --- a/drivers/iio/gyro/st_gyro.h
> +++ b/drivers/iio/gyro/st_gyro.h
> @@ -21,6 +21,7 @@
> #define L3GD20_GYRO_DEV_NAME "l3gd20"
> #define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
> #define LSM330_GYRO_DEV_NAME "lsm330_gyro"
> +#define LSM9DS0_GYRO_DEV_NAME "lsm9ds0_gyro"
>
> /**
> * struct st_sensors_platform_data - gyro platform data
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index 110f95b..9589ba9 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -203,6 +203,7 @@ static const struct st_sensor_settings
> st_gyro_sensors_settings[] = {
> [2] = LSM330DLC_GYRO_DEV_NAME,
> [3] = L3G4IS_GYRO_DEV_NAME,
> [4] = LSM330_GYRO_DEV_NAME,
> + [5] = LSM9DS0_GYRO_DEV_NAME,
> },
> .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
> .odr = {
> diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
> index 6848451..40056b8 100644
> --- a/drivers/iio/gyro/st_gyro_i2c.c
> +++ b/drivers/iio/gyro/st_gyro_i2c.c
> @@ -48,6 +48,10 @@ static const struct of_device_id st_gyro_of_match[] = {
> .compatible = "st,lsm330-gyro",
> .data = LSM330_GYRO_DEV_NAME,
> },
> + {
> + .compatible = "st,lsm9ds0-gyro",
> + .data = LSM9DS0_GYRO_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_gyro_of_match);
> @@ -93,6 +97,7 @@ static const struct i2c_device_id st_gyro_id_table[] = {
> { L3GD20_GYRO_DEV_NAME },
> { L3G4IS_GYRO_DEV_NAME },
> { LSM330_GYRO_DEV_NAME },
> + { LSM9DS0_GYRO_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_gyro_id_table);
> diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
> index d2b7a5f..fbf2fae 100644
> --- a/drivers/iio/gyro/st_gyro_spi.c
> +++ b/drivers/iio/gyro/st_gyro_spi.c
> @@ -54,6 +54,7 @@ static const struct spi_device_id st_gyro_id_table[] = {
> { L3GD20_GYRO_DEV_NAME },
> { L3G4IS_GYRO_DEV_NAME },
> { LSM330_GYRO_DEV_NAME },
> + { LSM9DS0_GYRO_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_gyro_id_table);
> diff --git a/drivers/iio/magnetometer/st_magn.h
> b/drivers/iio/magnetometer/st_magn.h
> index 06a4d9c..2176064 100644
> --- a/drivers/iio/magnetometer/st_magn.h
> +++ b/drivers/iio/magnetometer/st_magn.h
> @@ -19,6 +19,7 @@
> #define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn"
> #define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
> #define LSM303AGR_MAGN_DEV_NAME "lsm303agr_magn"
> +#define LSM9DS0_MAGN_DEV_NAME "lsm9ds0_magn"
>
> int st_magn_common_probe(struct iio_dev *indio_dev);
> void st_magn_common_remove(struct iio_dev *indio_dev);
> diff --git a/drivers/iio/magnetometer/st_magn_core.c
> b/drivers/iio/magnetometer/st_magn_core.c
> index 501f858..da3f29a 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -36,6 +36,7 @@
> /* FULLSCALE */
> #define ST_MAGN_FS_AVL_1300MG 1300
> #define ST_MAGN_FS_AVL_1900MG 1900
> +#define ST_MAGN_FS_AVL_2000MG 2000
> #define ST_MAGN_FS_AVL_2500MG 2500
> #define ST_MAGN_FS_AVL_4000MG 4000
> #define ST_MAGN_FS_AVL_4700MG 4700
> @@ -183,6 +184,50 @@
> #define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
> #define ST_MAGN_3_OUT_Z_L_ADDR 0x6c
>
> +/* CUSTOM VALUES FOR SENSOR 4 */
> +#define ST_MAGN_4_WAI_EXP 0x49
> +#define ST_MAGN_4_ODR_ADDR 0x24
> +#define ST_MAGN_4_ODR_MASK 0x1c
> +#define ST_MAGN_4_ODR_AVL_3HZ_VAL 0x00
> +#define ST_MAGN_4_ODR_AVL_6HZ_VAL 0x01
> +#define ST_MAGN_4_ODR_AVL_12HZ_VAL 0x02
> +#define ST_MAGN_4_ODR_AVL_25HZ_VAL 0x03
> +#define ST_MAGN_4_ODR_AVL_50HZ_VAL 0x04
> +#define ST_MAGN_4_ODR_AVL_100HZ_VAL 0x05
> +#define ST_MAGN_4_PW_ADDR 0x26
> +#define ST_MAGN_4_PW_MASK 0x03
> +#define ST_MAGN_4_PW_ON 0x00
> +#define ST_MAGN_4_PW_OFF 0x03
> +#define ST_MAGN_4_FS_ADDR 0x25
> +#define ST_MAGN_4_FS_MASK 0x60
> +#define ST_MAGN_4_FS_AVL_2000_VAL 0x00
> +#define ST_MAGN_4_FS_AVL_4000_VAL 0x01
> +#define ST_MAGN_4_FS_AVL_8000_VAL 0x02
> +#define ST_MAGN_4_FS_AVL_12000_VAL 0x03
> +#define ST_MAGN_4_FS_AVL_2000_GAIN 73
> +#define ST_MAGN_4_FS_AVL_4000_GAIN 146
> +#define ST_MAGN_4_FS_AVL_8000_GAIN 292
> +#define ST_MAGN_4_FS_AVL_12000_GAIN 438
> +/* Shared with accelerometer */
> +#define ST_MAGN_4_BDU_ADDR 0x20
> +#define ST_MAGN_4_BDU_MASK 0x08
> +#define ST_MAGN_4_DRDY_IRQ_ADDR 0x22
> +#define ST_MAGN_4_DRDY_INT_MASK 0x01
> +/* INT2 is actually at another address. Not supported by driver */
> +/*
> +#define ST_MAGN_4_DRDY_IRQ_INT2_ADDR 0x23
> +#define ST_MAGN_4_DRDY_IRQ_INT2_MASK 0x04
> + */
> +/* Common to accelerometer so not supported */
> +/*
> +#define ST_MAGN_4_IHL_IRQ_ADDR 0x12
> +#define ST_MAGN_4_IHL_IRQ_MASK 0x80
> + */
> +#define ST_MAGN_4_MULTIREAD_BIT true
> +#define ST_MAGN_4_OUT_X_L_ADDR 0x08
> +#define ST_MAGN_4_OUT_Y_L_ADDR 0x0a
> +#define ST_MAGN_4_OUT_Z_L_ADDR 0x0c
> +
> static const struct iio_chan_spec st_magn_16bit_channels[] = {
> ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
> BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> @@ -231,6 +276,22 @@ static const struct iio_chan_spec
> st_magn_3_16bit_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(3)
> };
>
> +static const struct iio_chan_spec st_magn_4_16bit_channels[] = {
> + ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
> + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
> + ST_MAGN_4_OUT_X_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
> + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
> + ST_MAGN_4_OUT_Y_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
> + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
> + ST_MAGN_4_OUT_Z_L_ADDR),
> + IIO_CHAN_SOFT_TIMESTAMP(3)
> +};
> +
> static const struct st_sensor_settings st_magn_sensors_settings[] = {
> {
> .wai = 0, /* This sensor has no valid WhoAmI report 0 */
> @@ -488,6 +549,68 @@ static const struct st_sensor_settings
> st_magn_sensors_settings[] = {
> .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
> .bootime = 2,
> },
> + {
> + .wai = ST_MAGN_4_WAI_EXP,
> + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> + .sensors_supported = {
> + [0] = LSM9DS0_MAGN_DEV_NAME,
> + },
> + .ch = (struct iio_chan_spec *)st_magn_4_16bit_channels,
> + .odr = {
> + .addr = ST_MAGN_4_ODR_ADDR,
> + .mask = ST_MAGN_4_ODR_MASK,
> + .odr_avl = {
> + { 3, ST_MAGN_4_ODR_AVL_3HZ_VAL, },
> + { 6, ST_MAGN_4_ODR_AVL_6HZ_VAL, },
> + { 12, ST_MAGN_4_ODR_AVL_12HZ_VAL, },
> + { 25, ST_MAGN_4_ODR_AVL_25HZ_VAL, },
> + { 50, ST_MAGN_4_ODR_AVL_50HZ_VAL, },
> + { 100, ST_MAGN_4_ODR_AVL_100HZ_VAL, },
> + },
> + },
> + .pw = {
> + .addr = ST_MAGN_4_PW_ADDR,
> + .mask = ST_MAGN_4_PW_MASK,
> + .value_on = ST_MAGN_4_PW_ON,
> + .value_off = ST_MAGN_4_PW_OFF,
> + },
> + .fs = {
> + .addr = ST_MAGN_4_FS_ADDR,
> + .mask = ST_MAGN_4_FS_MASK,
> + .fs_avl = {
> + [0] = {
> + .num = ST_MAGN_FS_AVL_2000MG,
> + .value = ST_MAGN_4_FS_AVL_2000_VAL,
> + .gain = ST_MAGN_4_FS_AVL_2000_GAIN,
> + },
> + [1] = {
> + .num = ST_MAGN_FS_AVL_4000MG,
> + .value = ST_MAGN_4_FS_AVL_4000_VAL,
> + .gain = ST_MAGN_4_FS_AVL_4000_GAIN,
> + },
> + [2] = {
> + .num = ST_MAGN_FS_AVL_8000MG,
> + .value = ST_MAGN_4_FS_AVL_8000_VAL,
> + .gain = ST_MAGN_4_FS_AVL_8000_GAIN,
> + },
> + [3] = {
> + .num = ST_MAGN_FS_AVL_12000MG,
> + .value = ST_MAGN_4_FS_AVL_12000_VAL,
> + .gain = ST_MAGN_4_FS_AVL_12000_GAIN,
> + },
> + },
> + },
> + .bdu = {
> + .addr = ST_MAGN_4_BDU_ADDR,
> + .mask = ST_MAGN_4_BDU_MASK,
> + },
> + .drdy_irq = {
> + .addr = ST_MAGN_4_DRDY_IRQ_ADDR,
> + .mask_int1 = ST_MAGN_4_DRDY_INT_MASK,
> + },
> + .multi_read_bit = ST_MAGN_4_MULTIREAD_BIT,
> + .bootime = 2,
> + },
> };
>
> static int st_magn_read_raw(struct iio_dev *indio_dev,
> diff --git a/drivers/iio/magnetometer/st_magn_i2c.c
> b/drivers/iio/magnetometer/st_magn_i2c.c
> index 8aa37af..1c7c487 100644
> --- a/drivers/iio/magnetometer/st_magn_i2c.c
> +++ b/drivers/iio/magnetometer/st_magn_i2c.c
> @@ -40,6 +40,10 @@ static const struct of_device_id st_magn_of_match[] = {
> .compatible = "st,lsm303agr-magn",
> .data = LSM303AGR_MAGN_DEV_NAME,
> },
> + {
> + .compatible = "st,lsm9ds0-magn",
> + .data = LSM9DS0_MAGN_DEV_NAME,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_magn_of_match);
> @@ -84,6 +88,7 @@ static const struct i2c_device_id st_magn_id_table[] = {
> { LSM303DLM_MAGN_DEV_NAME },
> { LIS3MDL_MAGN_DEV_NAME },
> { LSM303AGR_MAGN_DEV_NAME },
> + { LSM9DS0_MAGN_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_magn_id_table);
> diff --git a/drivers/iio/magnetometer/st_magn_spi.c
> b/drivers/iio/magnetometer/st_magn_spi.c
> index 6325e7d..8c4e1d6 100644
> --- a/drivers/iio/magnetometer/st_magn_spi.c
> +++ b/drivers/iio/magnetometer/st_magn_spi.c
> @@ -52,6 +52,7 @@ static const struct spi_device_id st_magn_id_table[] = {
> { LSM303DLM_MAGN_DEV_NAME },
> { LIS3MDL_MAGN_DEV_NAME },
> { LSM303AGR_MAGN_DEV_NAME },
> + { LSM9DS0_MAGN_DEV_NAME },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_magn_id_table);
>
