On 01.03.2016 02:42, Michael Welling wrote:
On Mon, Feb 29, 2016 at 10:09:10PM -0300, Lucas De Marchi wrote:
On Mon, Feb 29, 2016 at 9:50 PM, Michael Welling <mwell...@ieee.org>
wrote:
> On Fri, Feb 05, 2016 at 03:17:18PM +0200, Daniel Baluta wrote:
>> The driver has sysfs readings with runtime PM support for power saving.
>> It also offers buffer support that can be used together with IIO software
>> triggers.
>>
>
> Daniel,
>
> So I noticed something yesterday while testing new boards.
> The channels are occassionally swapping when accessing data from multiple
channels.
>
> I wrote a simple bash script to demonstrate.
This happened to me in a previous version of the patch. I remember it
being fixed in the last version (or at least I could not reproduce).
I'll test again tomorrow with your script.
Here is what I believe is happening.
The request for a conversion on a new channel comes in while the
conversion
for the previous channel is still converting. The driver waits
approximately
one conversion cycle. The previous channel completes within this
timeframe
and the MUX is changed and the new sample is started. The new sample is
still
converting and the driver returns the value from the previous
conversion.
For a test I multiplied the conv_time value by 2 in the
ads1015_get_adc_result
function. This allows time for the current sample flush out and always
returns
the appropriate channel's value.
Looking at the buffered mode it appears that only one channel is being
accessed
at any time. This being the first one in the active_scan_mask found by
find_first_bit. So the MUX would never change is buffered mode as far I
can
tell.
Don't we typically want to read all of enabled channels in buffered
mode?
In some devices that is effectively impossible (fifo's that fill only
from the currently
selected channel). That is what the onehot validation callback is about.
In this particular case it looks like doing a multichannel read is fair
bit more time
consuming than a single channel read and so will result in a
considerable reduction in
throughput. This is of course why many parts include a simple
sequencer!
Anyhow, supporting multi channel buffered reads could be done (probably)
but you
would want to fall back to the single channel case as it is now.
Jonathan
Lucas De Marchi
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
