Hi Rob
在 18/02/2016 22:36, Rob Herring 写道:
On Wed, Feb 17, 2016 at 09:54:49AM +0800, jianqun.xu wrote:
From: Xing Zheng <zhengx...@rock-chips.com>
Add the devicetree binding for the cru on the rk3399 which quite
similar structured as previous clock controllers.
Signed-off-by: Xing Zheng <zhengx...@rock-chips.com>
---
.../bindings/clock/rockchip,rk3399-cru.txt | 82 ++++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644
Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
new file mode 100644
index 0000000..07bcc6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
@@ -0,0 +1,82 @@
+* Rockchip RK3399 Clock and Reset Unit
[...]
+Example: General Register Files
+
+ pmugrf: syscon@ff320000 {
+ compatible = "rockchip,rk3399-pmugrf", "syscon";
Is this documented?
Since there is no documentation for rockchip grf from early SoCs, I
think if we need to add a new devicetree documentation, such as
Documentation/devicetree/bindings/clock/rockchip,rk3399-grf.txt ?
If you agree, I will add it in next patch
+ reg = <0x0 0xff320000 0x0 0x1000>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon";
ditto.
+ reg = <0x0 0xff770000 0x0 0x10000>;
+ };
+
+Example: Clock controller node:
+
+ pmucru: pmu-clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0x0 0xff750000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff1a0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
--
1.9.1
