From: Sameer Nanda <sna...@chromium.org>
This driver exposes the charger functionality in the PD EC to userspace.
Signed-off-by: Tomeu Vizoso <tomeu.viz...@collabora.com>
Cc: Sameer Nanda <sna...@chromium.org>
Cc: Benson Leung <ble...@chromium.org>
Cc: Shawn Nematbakhsh <sha...@chromium.org>
---
drivers/platform/chrome/cros_ec_proto.c | 37 ++
drivers/power/Kconfig | 10 +
drivers/power/Makefile | 1 +
drivers/power/cros_usbpd-charger.c | 907 ++++++++++++++++++++++++++++++++
include/linux/mfd/cros_ec.h | 28 +
include/linux/mfd/cros_ec_commands.h | 324 +++++++++++-
6 files changed, 1302 insertions(+), 5 deletions(-)
create mode 100644 drivers/power/cros_usbpd-charger.c
diff --git a/drivers/platform/chrome/cros_ec_proto.c
b/drivers/platform/chrome/cros_ec_proto.c
index 6e138e2333f3..083a32461f2d 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -482,3 +482,40 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev)
return get_keyboard_state_event(ec_dev);
}
EXPORT_SYMBOL(cros_ec_get_next_event);
+
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ int ret = cros_ec_cmd_xfer(ec_dev, msg);
+
+ if (ret < 0)
+ dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
+ else if (msg->result)
+ return -EECRESULT - msg->result;
+
+ return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
+
+u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
+{
+ u32 host_event;
+
+ if (!ec_dev->mkbp_event_supported) {
+ dev_warn(ec_dev->dev,
+ "This EC does not support EC_MKBP_EVENT_HOST_EVENT");
+ return -EPROTONOSUPPORT;
+ }
+
+ if (ec_dev->event_data.event_type != EC_MKBP_EVENT_HOST_EVENT)
+ return 0;
+
+ if (ec_dev->event_size != sizeof(host_event)) {
+ dev_warn(ec_dev->dev, "Invalid host event size\n");
+ return 0;
+ }
+
+ host_event = get_unaligned_le32(&ec_dev->event_data.data.host_event);
+ return host_event;
+}
+EXPORT_SYMBOL(cros_ec_get_host_event);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 1ddd13cc0c07..26355850d91b 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -502,6 +502,16 @@ config AXP20X_POWER
This driver provides support for the power supply features of
AXP20x PMIC.
+config CHARGER_CROS_USB_PD
+ tristate "Chrome OS EC based USB PD charger"
+ depends on MFD_CROS_EC
+ default y
+ help
+ Say Y here to enable Chrome OS EC based USB PD charger driver. This
+ driver gets various bits of information about what is connected to
+ USB PD ports from the EC and converts that into power_supply
+ properties.
+
endif # POWER_SUPPLY
source "drivers/power/reset/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 0e4eab55f8d7..b83685bfae61 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -73,3 +73,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
obj-$(CONFIG_POWER_RESET) += reset/
obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USB_PD) += cros_usbpd-charger.o
diff --git a/drivers/power/cros_usbpd-charger.c
b/drivers/power/cros_usbpd-charger.c
new file mode 100644
index 000000000000..72c427554b56
--- /dev/null
+++ b/drivers/power/cros_usbpd-charger.c
@@ -0,0 +1,907 @@
+/*
+ * Power supply driver for ChromeOS EC based USB PD Charger.
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/fs.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define CROS_USB_PD_MAX_PORTS 8
+#define CROS_USB_PD_MAX_LOG_ENTRIES 30
+
+#define CROS_USB_PD_LOG_UPDATE_DELAY msecs_to_jiffies(60000)
+#define CROS_USB_PD_CACHE_UPDATE_DELAY msecs_to_jiffies(500)
+
+/* Buffer + macro for building PDLOG string */
+#define BUF_SIZE 80
+#define APPEND_STRING(buf, len, str, ...) ((len) += \
+ snprintf((buf) + (len), max(BUF_SIZE - (len), 0), (str), ##__VA_ARGS__))
+
+#define CHARGER_DIR_NAME "CROS_USB_PD_CHARGER%d"
+#define CHARGER_DIR_NAME_LENGTH sizeof(CHARGER_DIR_NAME)
+
+#define MANUFACTURER_MODEL_LENGTH 32
+
+struct port_data {
+ int port_number;
+ char name[CHARGER_DIR_NAME_LENGTH];
+ char manufacturer[MANUFACTURER_MODEL_LENGTH];
+ char model_name[MANUFACTURER_MODEL_LENGTH];
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ int psy_type;
+ int psy_online;
+ int psy_status;
+ int psy_current_max;
+ int psy_voltage_max_design;
+ int psy_voltage_now;
+ int psy_power_max;
+ struct charger_data *charger;
+ unsigned long last_update;
+};
+
+struct charger_data {
+ struct device *dev;
+ struct cros_ec_dev *ec_dev;
+ struct cros_ec_device *ec_device;
+ int num_charger_ports;
+ int num_registered_psy;
+ struct port_data *ports[CROS_USB_PD_MAX_PORTS];
+ struct delayed_work log_work;
+ struct workqueue_struct *log_workqueue;
+ struct notifier_block notifier;
+ bool suspended;
+};
+
+#define EC_MAX_IN_SIZE EC_PROTO2_MAX_REQUEST_SIZE
+#define EC_MAX_OUT_SIZE EC_PROTO2_MAX_RESPONSE_SIZE
+uint8_t ec_inbuf[EC_MAX_IN_SIZE];
+uint8_t ec_outbuf[EC_MAX_OUT_SIZE];
+
+static enum power_supply_property cros_usb_pd_charger_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+/* Current external voltage/current limit in mV/mA. Default to none. */
+static uint16_t ext_voltage_lim = EC_POWER_LIMIT_NONE;
+static uint16_t ext_current_lim = EC_POWER_LIMIT_NONE;
+
+static int ec_command(struct cros_ec_dev *ec_dev, int version, int command,
+ uint8_t *outdata, int outsize, uint8_t *indata,
+ int insize)
+{
+ struct cros_ec_device *ec_device = ec_dev->ec_dev;
+ struct cros_ec_command *msg;
+ int ret;
+
+ msg = kmalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = version;
+ msg->command = ec_dev->cmd_offset + command;
+ msg->outsize = outsize;
+ msg->insize = insize;
+
+ memcpy(msg->data, outdata, outsize);
+ ret = cros_ec_cmd_xfer_status(ec_device, msg);
+ memcpy(indata, msg->data, insize);
+
+ kfree(msg);
+
+ return ret;
+}
+
+static int set_ec_usb_pd_override_ports(struct charger_data *charger,
+ int port_num)
+{
+ struct device *dev = charger->dev;
+ struct ec_params_charge_port_override req;
+ int ret;
+
+ req.override_port = port_num;
+
+ ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_CHARGE_PORT_OVERRIDE,
+ (uint8_t *)&req, sizeof(req),
+ NULL, 0);
+ if (ret < 0) {
+ dev_info(dev, "Port Override command returned 0x%x\n", ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int get_ec_num_ports(struct charger_data *charger, int *num_ports)
+{
+ struct device *dev = charger->dev;
+ struct ec_response_usb_pd_ports *resp =
+ (struct ec_response_usb_pd_ports *)ec_inbuf;
+ int ret;
+
+ *num_ports = 0;
+ ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_PORTS,
+ NULL, 0, ec_inbuf, EC_MAX_IN_SIZE);
+ if (ret < 0) {
+ dev_err(dev, "Unable to query PD ports (err:0x%x)\n", ret);
+ return ret;
+ }
+ *num_ports = resp->num_ports;
+ dev_dbg(dev, "Num ports = %d\n", *num_ports);
+
+ return 0;
+}
+
+static int get_ec_usb_pd_discovery_info(struct port_data *port)
+{
+ struct charger_data *charger = port->charger;
+ struct device *dev = charger->dev;
+ struct ec_params_usb_pd_info_request req;
+ struct ec_params_usb_pd_discovery_entry resp;
+ int ret;
+
+ req.port = port->port_number;
+
+ ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_DISCOVERY,
+ (uint8_t *)&req, sizeof(req),
+ (uint8_t *)&resp, sizeof(resp));
+ if (ret < 0) {
+ dev_err(dev, "Unable to query Discovery info (err:0x%x)\n",
+ ret);
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
+ port->port_number, resp.vid, resp.pid, resp.ptype);
+
+ snprintf(port->manufacturer, MANUFACTURER_MODEL_LENGTH, "%x", resp.vid);
+ snprintf(port->model_name, MANUFACTURER_MODEL_LENGTH, "%x", resp.pid);
+
+ return 0;
+}
+
+static int get_ec_usb_pd_power_info(struct port_data *port)
+{
+ struct charger_data *charger = port->charger;
+ struct device *dev = charger->dev;
+ struct ec_params_usb_pd_power_info req;
+ struct ec_response_usb_pd_power_info resp;
+ char role_str[80];
+ int ret, last_psy_status, last_psy_type;
+
+ req.port = port->port_number;
+ ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_POWER_INFO,
+ (uint8_t *)&req, sizeof(req),
+ (uint8_t *)&resp, sizeof(resp));
+ if (ret < 0) {
+ dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
+ return -EINVAL;
+ }
+
+ last_psy_status = port->psy_status;
+ last_psy_type = port->psy_type;
+
+ switch (resp.role) {
+ case USB_PD_PORT_POWER_DISCONNECTED:
+ snprintf(role_str, sizeof(role_str), "%s", "DISCONNECTED");
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 0;
+ break;
+ case USB_PD_PORT_POWER_SOURCE:
+ snprintf(role_str, sizeof(role_str), "%s", "SOURCE");
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 0;
+ break;
+ case USB_PD_PORT_POWER_SINK:
+ snprintf(role_str, sizeof(role_str), "%s", "SINK");
+ port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+ port->psy_online = 1;
+ break;
+ case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
+ snprintf(role_str, sizeof(role_str), "%s", "NOT CHARGING");
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 1;
+ break;
+ default:
+ snprintf(role_str, sizeof(role_str), "%s", "UNKNOWN");
+ dev_err(dev, "Unknown role %d\n", resp.role);
+ break;
+ }
+
+ port->psy_voltage_max_design = resp.meas.voltage_max;
+ port->psy_voltage_now = resp.meas.voltage_now;
+ port->psy_current_max = resp.meas.current_max;
+ port->psy_power_max = resp.max_power;
+
+ switch (resp.type) {
+ case USB_CHG_TYPE_BC12_SDP:
+ case USB_CHG_TYPE_VBUS:
+ port->psy_type = POWER_SUPPLY_TYPE_USB;
+ break;
+ case USB_CHG_TYPE_NONE:
+ /*
+ * For dual-role devices when we are a source, the firmware
+ * reports the type as NONE. Report such chargers as type
+ * USB_PD_DRP.
+ */
+ if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
+ port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP;
+ else
+ port->psy_type = POWER_SUPPLY_TYPE_USB;
+ break;
+ case USB_CHG_TYPE_PROPRIETARY:
+ port->psy_type = POWER_SUPPLY_TYPE_MAINS;
+ break;
+ case USB_CHG_TYPE_C:
+ port->psy_type = POWER_SUPPLY_TYPE_USB_TYPE_C;
+ break;
+ case USB_CHG_TYPE_BC12_DCP:
+ port->psy_type = POWER_SUPPLY_TYPE_USB_DCP;
+ break;
+ case USB_CHG_TYPE_BC12_CDP:
+ port->psy_type = POWER_SUPPLY_TYPE_USB_CDP;
+ break;
+ case USB_CHG_TYPE_PD:
+ if (resp.dualrole)
+ port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP;
+ else
+ port->psy_type = POWER_SUPPLY_TYPE_USB_PD;
+ break;
+ case USB_CHG_TYPE_UNKNOWN:
+ /*
+ * While the EC is trying to determine the type of charger that
+ * has been plugged in, it will report the charger type as
+ * unknown. Treat this case as a dedicated charger since we
+ * don't know any better just yet. Additionally since the power
+ * capabilities are unknown, report the max current and voltage
+ * as zero.
+ */
+ port->psy_type = POWER_SUPPLY_TYPE_MAINS;
+ port->psy_voltage_max_design = 0;
+ port->psy_current_max = 0;
+ break;
+ default:
+ dev_err(dev, "Port %d: default case!\n",
+ port->port_number);
+ port->psy_type = POWER_SUPPLY_TYPE_USB;
+ }
+
+ port->psy_desc.type = port->psy_type;
+
+ dev_dbg(dev,
+ "Port %d: %s type=%d=vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
+ port->port_number, role_str, resp.type,
+ resp.meas.voltage_max, resp.meas.voltage_now,
+ resp.meas.current_max, resp.meas.current_lim,
+ resp.max_power);
+
+ /*
+ * If power supply type or status changed, explicitly call
+ * power_supply_changed. This results in udev event getting generated
+ * and allows user mode apps to react quicker instead of waiting for
+ * their next poll of power supply status.
+ */
+ if (last_psy_type != port->psy_type ||
+ last_psy_status != port->psy_status) {
+ dev_dbg(dev, "Port %d: Calling power_supply_changed\n",
+ port->port_number);
+ power_supply_changed(port->psy);
+ }
+
+ return 0;
+}
+
+static int get_ec_port_status(struct port_data *port, bool ratelimit)
+{
+ int ret;
+
+ if (ratelimit &&
+ time_is_after_jiffies(port->last_update +
+ CROS_USB_PD_CACHE_UPDATE_DELAY))
+ return 0;
+
+ ret = get_ec_usb_pd_power_info(port);
+ if (ret < 0)
+ return ret;
+
+ ret = get_ec_usb_pd_discovery_info(port);
+ port->last_update = jiffies;
+
+ return ret;
+}
+
+static void cros_usb_pd_charger_power_changed(struct power_supply *psy)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ struct device *dev = charger->dev;
+ int i;
+
+ dev_dbg(dev, "cros_usb_pd_charger_power_changed\n");
+ for (i = 0; i < charger->num_registered_psy; i++)
+ get_ec_port_status(charger->ports[i], false);
+}
+
+static int cros_usb_pd_charger_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ struct device *dev = charger->dev;
+ int ret;
+
+
+ /* Only refresh ec_port_status for dynamic properties */
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ ret = get_ec_port_status(port, true);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get port status (err:0x%x)\n",
+ ret);
+ return -EINVAL;
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = port->psy_online;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = port->psy_status;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = port->psy_current_max * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = port->psy_voltage_max_design * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = port->psy_voltage_now * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ /* TODO: send a TBD host command to the EC. */
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = port->model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = port->manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cros_usb_pd_charger_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ int port_number;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ /*
+ * A value of -1 implies switching to battery as the power
+ * source. Any other value implies using this port as the
+ * power source.
+ */
+ port_number = val->intval;
+ if (port_number != -1)
+ port_number = port->port_number;
+ return set_ec_usb_pd_override_ports(charger, port_number);
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int cros_usb_pd_charger_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void cros_usb_pd_print_log_entry(struct ec_response_pd_log *r,
+ ktime_t tstamp)
+{
+ static const char * const fault_names[] = {
+ "---", "OCP", "fast OCP", "OVP", "Discharge"
+ };
+ static const char * const role_names[] = {
+ "Disconnected", "SRC", "SNK", "SNK (not charging)"
+ };
+ static const char * const chg_type_names[] = {
+ "None", "PD", "Type-C", "Proprietary",
+ "DCP", "CDP", "SDP", "Other", "VBUS"
+ };
+ int i;
+ int role_idx, type_idx;
+ const char *fault, *role, *chg_type;
+ struct usb_chg_measures *meas;
+ struct mcdp_info *minfo;
+ struct rtc_time rt;
+ int len = 0;
+ char buf[BUF_SIZE + 1];
+
+ /* the timestamp is the number of 1024th of seconds in the past */
+ tstamp = ktime_sub_us(tstamp,
+ (uint64_t)r->timestamp << PD_LOG_TIMESTAMP_SHIFT);
+ rt = rtc_ktime_to_tm(tstamp);
+
+ switch (r->type) {
+ case PD_EVENT_MCU_CHARGE:
+ if (r->data & CHARGE_FLAGS_OVERRIDE)
+ APPEND_STRING(buf, len, "override ");
+ if (r->data & CHARGE_FLAGS_DELAYED_OVERRIDE)
+ APPEND_STRING(buf, len, "pending_override ");
+ role_idx = r->data & CHARGE_FLAGS_ROLE_MASK;
+ role = role_idx < ARRAY_SIZE(role_names) ?
+ role_names[role_idx] : "Unknown";
+ type_idx = (r->data & CHARGE_FLAGS_TYPE_MASK)
+ >> CHARGE_FLAGS_TYPE_SHIFT;
+ chg_type = type_idx < ARRAY_SIZE(chg_type_names) ?
+ chg_type_names[type_idx] : "???";
+
+ if ((role_idx == USB_PD_PORT_POWER_DISCONNECTED) ||
+ (role_idx == USB_PD_PORT_POWER_SOURCE)) {
+ APPEND_STRING(buf, len, "%s", role);
+ break;
+ }
+
+ meas = (struct usb_chg_measures *)r->payload;
+ APPEND_STRING(buf, len, "%s %s %s %dmV max %dmV / %dmA", role,
+ r->data & CHARGE_FLAGS_DUAL_ROLE ? "DRP" : "Charger",
+ chg_type,
+ meas->voltage_now,
+ meas->voltage_max,
+ meas->current_max);
+ break;
+ case PD_EVENT_ACC_RW_FAIL:
+ APPEND_STRING(buf, len, "RW signature check failed");
+ break;
+ case PD_EVENT_PS_FAULT:
+ fault = r->data < ARRAY_SIZE(fault_names) ? fault_names[r->data]
+ : "???";
+ APPEND_STRING(buf, len, "Power supply fault: %s", fault);
+ break;
+ case PD_EVENT_VIDEO_DP_MODE:
+ APPEND_STRING(buf, len, "DP mode %sabled",
+ (r->data == 1) ? "en" : "dis");
+ break;
+ case PD_EVENT_VIDEO_CODEC:
+ minfo = (struct mcdp_info *)r->payload;
+ APPEND_STRING(buf, len,
+ "HDMI info: family:%04x chipid:%04x irom:%d.%d.%d
fw:%d.%d.%d",
+ MCDP_FAMILY(minfo->family),
+ MCDP_CHIPID(minfo->chipid),
+ minfo->irom.major, minfo->irom.minor,
+ minfo->irom.build, minfo->fw.major,
+ minfo->fw.minor, minfo->fw.build);
+ break;
+ default:
+ APPEND_STRING(buf, len,
+ "Event %02x (%04x) [", r->type, r->data);
+ for (i = 0; i < PD_LOG_SIZE(r->size_port); i++)
+ APPEND_STRING(buf, len, "%02x ", r->payload[i]);
+ APPEND_STRING(buf, len, "]");
+ break;
+ }
+
+ pr_info("PDLOG %d/%02d/%02d %02d:%02d:%02d.%03d P%d %s\n",
+ rt.tm_year + 1900, rt.tm_mon + 1, rt.tm_mday,
+ rt.tm_hour, rt.tm_min, rt.tm_sec,
+ (int)(ktime_to_ms(tstamp) % MSEC_PER_SEC),
+ PD_LOG_PORT(r->size_port), buf);
+}
+
+static void cros_usb_pd_log_check(struct work_struct *work)
+{
+ struct charger_data *charger = container_of(to_delayed_work(work),
+ struct charger_data, log_work);
+ struct device *dev = charger->dev;
+ union {
+ struct ec_response_pd_log r;
+ uint32_t words[8]; /* space for the payload */
+ } u;
+ int ret;
+ int entries = 0;
+ ktime_t now;
+
+ if (charger->suspended) {
+ dev_dbg(dev, "Suspended...bailing out\n");
+ return;
+ }
+
+ while (entries++ < CROS_USB_PD_MAX_LOG_ENTRIES) {
+ ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_GET_LOG_ENTRY,
+ NULL, 0, (uint8_t *)&u, sizeof(u));
+ now = ktime_get_real();
+ if (ret < 0) {
+ dev_dbg(dev, "Cannot get PD log %d\n", ret);
+ break;
+ }
+ if (u.r.type == PD_EVENT_NO_ENTRY)
+ break;
+
+ cros_usb_pd_print_log_entry(&u.r, now);
+ }
+
+ queue_delayed_work(charger->log_workqueue, &charger->log_work,
+ CROS_USB_PD_LOG_UPDATE_DELAY);
+}
+
+static int cros_usb_pd_ec_event(struct notifier_block *nb,
+ unsigned long queued_during_suspend, void *_notify)
+{
+ struct charger_data *charger;
+ struct device *dev;
+ struct cros_ec_device *ec_device;
+ u32 host_event;
+
+ charger = container_of(nb, struct charger_data, notifier);
+ dev = charger->dev;
+ ec_device = charger->ec_device;
+
+ host_event = cros_ec_get_host_event(ec_device);
+ if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
+ cros_usb_pd_charger_power_changed(charger->ports[0]->psy);
+ return NOTIFY_OK;
+ } else {
+ return NOTIFY_DONE;
+ }
+}
+
+static char *charger_supplied_to[] = {"cros-usb_pd-charger"};
+
+static int cros_usb_pd_charger_probe(struct platform_device *pd)
+{
+ struct device *dev = &pd->dev;
+ struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+ struct cros_ec_device *ec_device;
+ struct charger_data *charger;
+ struct port_data *port;
+ struct power_supply_desc *psy_desc;
+ struct power_supply_config psy_cfg = {};
+ int i;
+ int ret = -EINVAL;
+
+ dev_dbg(dev, "cros_usb_pd_charger_probe\n");
+ if (!ec_dev) {
+ WARN(1, "%s: No EC dev found\n", dev_name(dev));
+ return -EINVAL;
+ }
+
+ ec_device = ec_dev->ec_dev;
+ if (!ec_device) {
+ WARN(1, "%s: No EC device found\n", dev_name(dev));
+ return -EINVAL;
+ }
+
+ charger = devm_kzalloc(dev, sizeof(struct charger_data),
+ GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->dev = dev;
+ charger->ec_dev = ec_dev;
+ charger->ec_device = ec_device;
+
+ platform_set_drvdata(pd, charger);
+
+ if (!charger->num_charger_ports) {
+ /*
+ * This can happen on a system that doesn't support USB PD.
+ * Log a message, but no need to warn.
+ */
+ dev_info(dev, "No charging ports found\n");
+ ret = -ENODEV;
+ goto fail_nowarn;
+ }
+
+ for (i = 0; i < charger->num_charger_ports; i++) {
+ port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
+ if (!port) {
+ dev_err(dev, "Failed to alloc port structure\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ port->charger = charger;
+ port->port_number = i;
+ sprintf(port->name, CHARGER_DIR_NAME, i);
+
+ psy_desc = &port->psy_desc;
+ psy_desc->name = port->name;
+ psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ psy_desc->get_property = cros_usb_pd_charger_get_prop;
+ psy_desc->set_property = cros_usb_pd_charger_set_prop;
+ psy_desc->property_is_writeable =
+ cros_usb_pd_charger_is_writeable;
+ psy_desc->external_power_changed =
+ cros_usb_pd_charger_power_changed;
+ psy_desc->properties = cros_usb_pd_charger_props;
+ psy_desc->num_properties = ARRAY_SIZE(
+ cros_usb_pd_charger_props);
+
+ psy_cfg.drv_data = port;
+ psy_cfg.supplied_to = charger_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(charger_supplied_to);
+
+ port->psy = power_supply_register_no_ws(dev, psy_desc,
+ &psy_cfg);
+ if (IS_ERR(port->psy)) {
+ dev_err(dev, "Failed to register power supply: %ld\n",
+ PTR_ERR(port->psy));
+ continue;
+ }
+
+ charger->ports[charger->num_registered_psy++] = port;
+ }
+
+ if (!charger->num_registered_psy) {
+ ret = -ENODEV;
+ dev_err(dev, "No power supplies registered\n");
+ goto fail;
+ }
+
+ if (ec_device->mkbp_event_supported) {
+ /* Get PD events from the EC */
+ charger->notifier.notifier_call = cros_usb_pd_ec_event;
+ ret = blocking_notifier_chain_register(
+ &ec_device->event_notifier, &charger->notifier);
+ if (ret < 0)
+ dev_warn(dev, "failed to register notifier\n");
+ }
+
+ /* Retrieve PD event logs periodically */
+ INIT_DELAYED_WORK(&charger->log_work, cros_usb_pd_log_check);
+ charger->log_workqueue =
+ create_singlethread_workqueue("cros_usb_pd_log");
+ queue_delayed_work(charger->log_workqueue, &charger->log_work,
+ CROS_USB_PD_LOG_UPDATE_DELAY);
+
+ return 0;
+
+fail:
+ WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
+
+fail_nowarn:
+ if (charger) {
+ for (i = 0; i < charger->num_registered_psy; i++) {
+ port = charger->ports[i];
+ power_supply_unregister(port->psy);
+ devm_kfree(dev, port);
+ }
+ platform_set_drvdata(pd, NULL);
+ devm_kfree(dev, charger);
+ }
+
+ dev_info(dev, "Failing probe (err:0x%x)\n", ret);
+ return ret;
+}
+
+static int cros_usb_pd_charger_remove(struct platform_device *pd)
+{
+ struct charger_data *charger = platform_get_drvdata(pd);
+ struct device *dev = charger->dev;
+ struct port_data *port;
+ int i;
+
+ if (charger) {
+ for (i = 0; i < charger->num_registered_psy; i++) {
+ port = charger->ports[i];
+ power_supply_unregister(port->psy);
+ devm_kfree(dev, port);
+ }
+ flush_delayed_work(&charger->log_work);
+ platform_set_drvdata(pd, NULL);
+ devm_kfree(dev, charger);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_usb_pd_charger_resume(struct device *dev)
+{
+ struct charger_data *charger = dev_get_drvdata(dev);
+ int i;
+
+ if (!charger)
+ return 0;
+
+ charger->suspended = false;
+
+ dev_dbg(dev, "cros_usb_pd_charger_resume: updating power supplies\n");
+ for (i = 0; i < charger->num_registered_psy; i++) {
+ power_supply_changed(charger->ports[i]->psy);
+ charger->ports[i]->last_update =
+ jiffies - CROS_USB_PD_CACHE_UPDATE_DELAY;
+ }
+ queue_delayed_work(charger->log_workqueue, &charger->log_work,
+ CROS_USB_PD_LOG_UPDATE_DELAY);
+
+ return 0;
+}
+
+static int cros_usb_pd_charger_suspend(struct device *dev)
+{
+ struct charger_data *charger = dev_get_drvdata(dev);
+
+ charger->suspended = true;
+
+ if (charger)
+ flush_delayed_work(&charger->log_work);
+ return 0;
+}
+#endif
+
+static int set_ec_ext_power_limit(struct cros_ec_dev *ec,
+ uint16_t current_lim, uint16_t voltage_lim)
+{
+ struct ec_params_external_power_limit_v1 req;
+ int ret;
+
+ req.current_lim = current_lim;
+ req.voltage_lim = voltage_lim;
+
+ ret = ec_command(ec, 0, EC_CMD_EXT_POWER_CURRENT_LIMIT,
+ (uint8_t *)&req, sizeof(req), NULL, 0);
+ if (ret < 0) {
+ dev_warn(ec->dev,
+ "External power limit command returned 0x%x\n",
+ ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static ssize_t get_ec_ext_current_lim(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ext_current_lim);
+}
+
+static ssize_t set_ec_ext_current_lim(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ uint16_t tmp_val;
+ struct cros_ec_dev *ec = container_of(
+ dev, struct cros_ec_dev, class_dev);
+
+ if (kstrtou16(buf, 0, &tmp_val) < 0)
+ return -EINVAL;
+
+ ret = set_ec_ext_power_limit(ec, tmp_val, ext_voltage_lim);
+ if (ret < 0)
+ return ret;
+
+ ext_current_lim = tmp_val;
+ if (ext_current_lim == EC_POWER_LIMIT_NONE)
+ dev_info(ec->dev, "External current limit removed\n");
+ else
+ dev_info(ec->dev, "External current limit set to %dmA\n",
+ ext_current_lim);
+
+ return count;
+}
+
+static ssize_t get_ec_ext_voltage_lim(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ext_voltage_lim);
+}
+
+static ssize_t set_ec_ext_voltage_lim(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ uint16_t tmp_val;
+
+ struct cros_ec_dev *ec = container_of(
+ dev, struct cros_ec_dev, class_dev);
+
+ if (kstrtou16(buf, 0, &tmp_val) < 0)
+ return -EINVAL;
+
+ ret = set_ec_ext_power_limit(ec, ext_current_lim, tmp_val);
+ if (ret < 0)
+ return ret;
+
+ ext_voltage_lim = tmp_val;
+ if (ext_voltage_lim == EC_POWER_LIMIT_NONE)
+ dev_info(ec->dev, "External voltage limit removed\n");
+ else
+ dev_info(ec->dev, "External voltage limit set to %dmV\n",
+ ext_voltage_lim);
+
+ return count;
+}
+
+static DEVICE_ATTR(ext_current_lim, S_IWUSR | S_IWGRP | S_IRUGO,
+ get_ec_ext_current_lim,
+ set_ec_ext_current_lim);
+static DEVICE_ATTR(ext_voltage_lim, S_IWUSR | S_IWGRP | S_IRUGO,
+ get_ec_ext_voltage_lim,
+ set_ec_ext_voltage_lim);
+
+static struct attribute *__ext_power_cmds_attrs[] = {
+ &dev_attr_ext_current_lim.attr,
+ &dev_attr_ext_voltage_lim.attr,
+ NULL,
+};
+
+struct attribute_group cros_usb_pd_charger_attr_group = {
+ .name = "usb-pd-charger",
+ .attrs = __ext_power_cmds_attrs,
+};
+
+static SIMPLE_DEV_PM_OPS(cros_usb_pd_charger_pm_ops,
+ cros_usb_pd_charger_suspend, cros_usb_pd_charger_resume);
+
+static struct platform_driver cros_usb_pd_charger_driver = {
+ .driver = {
+ .name = "cros-usb-pd-charger",
+ .owner = THIS_MODULE,
+ .pm = &cros_usb_pd_charger_pm_ops,
+ },
+ .probe = cros_usb_pd_charger_probe,
+ .remove = cros_usb_pd_charger_remove,
+};
+
+module_platform_driver(cros_usb_pd_charger_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Chrome USB PD charger");
+MODULE_ALIAS("power_supply:cros-usb-pd-charger");
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 8a8fa75178c6..c21583411ba0 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -40,6 +40,9 @@
#define EC_MAX_REQUEST_OVERHEAD 1
#define EC_MAX_RESPONSE_OVERHEAD 2
+/* ec_command return value for non-success result from EC */
+#define EECRESULT 1000
+
/*
* Command interface between EC and AP, for LPC, I2C and SPI interfaces.
*/
@@ -250,6 +253,21 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
/**
+ * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns succes
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * @ec_dev: EC device
+ * @msg: Message to write
+ * @return: Num. of bytes transferred on success, <0 on failure
+ */
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg);
+
+/**
* cros_ec_remove - Remove a ChromeOS EC
*
* Call this to deregister a ChromeOS EC, then clean up any private data.
@@ -286,6 +304,16 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev);
*/
int cros_ec_get_next_event(struct cros_ec_device *ec_dev);
+/**
+ * cros_ec_get_host_event - Return a mask of event set by the EC.
+ *
+ * Returns the mask of the event that caused the last interrupt to be raised.
+ *
+ * @ec_dev: Device to fetch event from
+ * @return event mask, 0 on error
+ */
+uint32_t cros_ec_get_host_event(struct cros_ec_device *ec_dev);
+
/* sysfs stuff */
extern struct attribute_group cros_ec_attr_group;
extern struct attribute_group cros_ec_lightbar_attr_group;
diff --git a/include/linux/mfd/cros_ec_commands.h
b/include/linux/mfd/cros_ec_commands.h
index d86526f0bd8e..4f056d2747ff 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -286,6 +286,9 @@ enum host_event_code {
/* Hang detect logic detected a hang and warm rebooted the AP */
EC_HOST_EVENT_HANG_REBOOT = 21,
+ /* PD MCU triggering host event */
+ EC_HOST_EVENT_PD_MCU = 22,
+
/*
* The high bit of the event mask is not used as a host event code. If
* it reads back as set, then the entire event mask should be
@@ -2273,6 +2276,13 @@ struct ec_params_ext_power_current_limit {
uint32_t limit; /* in mA */
} __packed;
+struct ec_params_external_power_limit_v1 {
+ uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
+ uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
+} __packed;
+
+#define EC_POWER_LIMIT_NONE 0xffff
+
/*****************************************************************************/
/* Smart battery pass-through */
@@ -2527,8 +2537,6 @@ struct ec_params_reboot_ec {
*/
#define EC_CMD_VERSION0 0xdc
-#endif /* !__ACPI__ */
-
/*****************************************************************************/
/*
* PD commands
@@ -2538,16 +2546,51 @@ struct ec_params_reboot_ec {
/* EC to PD MCU exchange status command */
#define EC_CMD_PD_EXCHANGE_STATUS 0x100
+#define EC_VER_PD_EXCHANGE_STATUS 2
+
+enum pd_charge_state {
+ PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */
+ PD_CHARGE_NONE, /* No charging allowed */
+ PD_CHARGE_5V, /* 5V charging only */
+ PD_CHARGE_MAX /* Charge at max voltage */
+};
/* Status of EC being sent to PD */
+#define EC_STATUS_HIBERNATING (1 << 0)
+
struct ec_params_pd_status {
- int8_t batt_soc; /* battery state of charge */
+ uint8_t status; /* EC status */
+ int8_t batt_soc; /* battery state of charge */
+ uint8_t charge_state; /* charging state (from enum pd_charge_state) */
} __packed;
/* Status of PD being sent back to EC */
+#define PD_STATUS_HOST_EVENT (1 << 0) /* Forward host event to AP */
+#define PD_STATUS_IN_RW (1 << 1) /* Running RW image */
+#define PD_STATUS_JUMPED_TO_IMAGE (1 << 2) /* Current image was jumped to */
+#define PD_STATUS_TCPC_ALERT_0 (1 << 3) /* Alert active in port 0 TCPC */
+#define PD_STATUS_TCPC_ALERT_1 (1 << 4) /* Alert active in port 1 TCPC */
+#define PD_STATUS_TCPC_ALERT_2 (1 << 5) /* Alert active in port 2 TCPC */
+#define PD_STATUS_TCPC_ALERT_3 (1 << 6) /* Alert active in port 3 TCPC */
+#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \
+ PD_STATUS_TCPC_ALERT_1 | \
+ PD_STATUS_HOST_EVENT)
struct ec_response_pd_status {
- int8_t status; /* PD MCU status */
- uint32_t curr_lim_ma; /* input current limit */
+ uint32_t curr_lim_ma; /* input current limit */
+ uint16_t status; /* PD MCU status */
+ int8_t active_charge_port; /* active charging port */
+} __packed;
+
+/* AP to PD MCU host event status command, cleared on read */
+#define EC_CMD_PD_HOST_EVENT_STATUS 0x104
+
+/* PD MCU host event status bits */
+#define PD_EVENT_UPDATE_DEVICE (1 << 0)
+#define PD_EVENT_POWER_CHANGE (1 << 1)
+#define PD_EVENT_IDENTITY_RECEIVED (1 << 2)
+#define PD_EVENT_DATA_SWAP (1 << 3)
+struct ec_response_host_event_status {
+ uint32_t status; /* PD MCU host event status */
} __packed;
/* Set USB type-C port role and muxes */
@@ -2559,6 +2602,7 @@ enum usb_pd_control_role {
USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
USB_PD_CTRL_ROLE_FORCE_SINK = 3,
USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+ USB_PD_CTRL_ROLE_COUNT
};
enum usb_pd_control_mux {
@@ -2568,14 +2612,284 @@ enum usb_pd_control_mux {
USB_PD_CTRL_MUX_DP = 3,
USB_PD_CTRL_MUX_DOCK = 4,
USB_PD_CTRL_MUX_AUTO = 5,
+ USB_PD_CTRL_MUX_COUNT
+};
+
+enum usb_pd_control_swap {
+ USB_PD_CTRL_SWAP_NONE = 0,
+ USB_PD_CTRL_SWAP_DATA = 1,
+ USB_PD_CTRL_SWAP_POWER = 2,
+ USB_PD_CTRL_SWAP_VCONN = 3,
+ USB_PD_CTRL_SWAP_COUNT
};
struct ec_params_usb_pd_control {
uint8_t port;
uint8_t role;
uint8_t mux;
+ uint8_t swap;
+} __packed;
+
+#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+
+#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
+#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
+#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
+#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power
*/
+#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
+#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
+#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd
*/
+
+struct ec_response_usb_pd_control {
+ uint8_t enabled;
+ uint8_t role;
+ uint8_t polarity;
+ uint8_t state;
+} __packed;
+
+struct ec_response_usb_pd_control_v1 {
+ uint8_t enabled;
+ uint8_t role;
+ uint8_t polarity;
+ char state[32];
+} __packed;
+
+#define EC_CMD_USB_PD_PORTS 0x102
+
+struct ec_response_usb_pd_ports {
+ uint8_t num_ports;
+} __packed;
+
+#define EC_CMD_USB_PD_POWER_INFO 0x103
+
+#define PD_POWER_CHARGING_PORT 0xff
+struct ec_params_usb_pd_power_info {
+ uint8_t port;
+} __packed;
+
+enum usb_chg_type {
+ USB_CHG_TYPE_NONE,
+ USB_CHG_TYPE_PD,
+ USB_CHG_TYPE_C,
+ USB_CHG_TYPE_PROPRIETARY,
+ USB_CHG_TYPE_BC12_DCP,
+ USB_CHG_TYPE_BC12_CDP,
+ USB_CHG_TYPE_BC12_SDP,
+ USB_CHG_TYPE_OTHER,
+ USB_CHG_TYPE_VBUS,
+ USB_CHG_TYPE_UNKNOWN,
+};
+enum usb_power_roles {
+ USB_PD_PORT_POWER_DISCONNECTED,
+ USB_PD_PORT_POWER_SOURCE,
+ USB_PD_PORT_POWER_SINK,
+ USB_PD_PORT_POWER_SINK_NOT_CHARGING,
+};
+
+struct usb_chg_measures {
+ uint16_t voltage_max;
+ uint16_t voltage_now;
+ uint16_t current_max;
+ uint16_t current_lim;
+} __packed;
+
+struct ec_response_usb_pd_power_info {
+ uint8_t role;
+ uint8_t type;
+ uint8_t dualrole;
+ uint8_t reserved1;
+ struct usb_chg_measures meas;
+ uint32_t max_power;
+} __packed;
+
+/* Write USB-PD device FW */
+#define EC_CMD_USB_PD_FW_UPDATE 0x110
+
+enum usb_pd_fw_update_cmds {
+ USB_PD_FW_REBOOT,
+ USB_PD_FW_FLASH_ERASE,
+ USB_PD_FW_FLASH_WRITE,
+ USB_PD_FW_ERASE_SIG,
+};
+
+struct ec_params_usb_pd_fw_update {
+ uint16_t dev_id;
+ uint8_t cmd;
+ uint8_t port;
+ uint32_t size; /* Size to write in bytes */
+ /* Followed by data to write */
+} __packed;
+
+/* Write USB-PD Accessory RW_HASH table entry */
+#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x111
+/* RW hash is first 20 bytes of SHA-256 of RW section */
+#define PD_RW_HASH_SIZE 20
+struct ec_params_usb_pd_rw_hash_entry {
+ uint16_t dev_id;
+ uint8_t dev_rw_hash[PD_RW_HASH_SIZE];
+ uint8_t reserved; /* For alignment of current_image */
+ uint32_t current_image; /* One of ec_current_image */
+} __packed;
+
+/* Read USB-PD Accessory info */
+#define EC_CMD_USB_PD_DEV_INFO 0x112
+
+struct ec_params_usb_pd_info_request {
+ uint8_t port;
+} __packed;
+
+/* Read USB-PD Device discovery info */
+#define EC_CMD_USB_PD_DISCOVERY 0x113
+struct ec_params_usb_pd_discovery_entry {
+ uint16_t vid; /* USB-IF VID */
+ uint16_t pid; /* USB-IF PID */
+ uint8_t ptype; /* product type (hub,periph,cable,ama) */
+} __packed;
+
+/* Override default charge behavior */
+#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x114
+
+/* Negative port parameters have special meaning */
+enum usb_pd_override_ports {
+ OVERRIDE_DONT_CHARGE = -2,
+ OVERRIDE_OFF = -1,
+ /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */
+};
+
+struct ec_params_charge_port_override {
+ int16_t override_port; /* Override port# */
+} __packed;
+
+/* Read (and delete) one entry of PD event log */
+#define EC_CMD_PD_GET_LOG_ENTRY 0x115
+
+struct ec_response_pd_log {
+ uint32_t timestamp; /* relative timestamp in milliseconds */
+ uint8_t type; /* event type : see PD_EVENT_xx below */
+ uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
+ uint16_t data; /* type-defined data payload */
+ uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
+} __packed;
+
+
+/* The timestamp is the microsecond counter shifted to get about a ms. */
+#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
+
+#define PD_LOG_SIZE_MASK 0x1f
+#define PD_LOG_PORT_MASK 0xe0
+#define PD_LOG_PORT_SHIFT 5
+#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \
+ ((size) & PD_LOG_SIZE_MASK))
+#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT)
+#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK)
+
+/* PD event log : entry types */
+/* PD MCU events */
+#define PD_EVENT_MCU_BASE 0x00
+#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0)
+#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1)
+/* Reserved for custom board event */
+#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2)
+/* PD generic accessory events */
+#define PD_EVENT_ACC_BASE 0x20
+#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0)
+#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1)
+/* PD power supply events */
+#define PD_EVENT_PS_BASE 0x40
+#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0)
+/* PD video dongles events */
+#define PD_EVENT_VIDEO_BASE 0x60
+#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0)
+#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1)
+/* Returned in the "type" field, when there is no entry available */
+#define PD_EVENT_NO_ENTRY 0xff
+
+/*
+ * PD_EVENT_MCU_CHARGE event definition :
+ * the payload is "struct usb_chg_measures"
+ * the data field contains the port state flags as defined below :
+ */
+/* Port partner is a dual role device */
+#define CHARGE_FLAGS_DUAL_ROLE (1 << 15)
+/* Port is the pending override port */
+#define CHARGE_FLAGS_DELAYED_OVERRIDE (1 << 14)
+/* Port is the override port */
+#define CHARGE_FLAGS_OVERRIDE (1 << 13)
+/* Charger type */
+#define CHARGE_FLAGS_TYPE_SHIFT 3
+#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT)
+/* Power delivery role */
+#define CHARGE_FLAGS_ROLE_MASK (7 << 0)
+
+/*
+ * PD_EVENT_PS_FAULT data field flags definition :
+ */
+#define PS_FAULT_OCP 1
+#define PS_FAULT_FAST_OCP 2
+#define PS_FAULT_OVP 3
+#define PS_FAULT_DISCH 4
+
+/*
+ * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info".
+ */
+struct mcdp_version {
+ uint8_t major;
+ uint8_t minor;
+ uint16_t build;
} __packed;
+struct mcdp_info {
+ uint8_t family[2];
+ uint8_t chipid[2];
+ struct mcdp_version irom;
+ struct mcdp_version fw;
+} __packed;
+
+/* struct mcdp_info field decoding */
+#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
+#define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
+
+/* Get/Set USB-PD Alternate mode info */
+#define EC_CMD_USB_PD_GET_AMODE 0x116
+struct ec_params_usb_pd_get_mode_request {
+ uint16_t svid_idx; /* SVID index to get */
+ uint8_t port; /* port */
+} __packed;
+
+struct ec_params_usb_pd_get_mode_response {
+ uint16_t svid; /* SVID */
+ uint16_t opos; /* Object Position */
+ uint32_t vdo[6]; /* Mode VDOs */
+} __packed;
+
+#define EC_CMD_USB_PD_SET_AMODE 0x117
+
+enum pd_mode_cmd {
+ PD_EXIT_MODE = 0,
+ PD_ENTER_MODE = 1,
+ /* Not a command. Do NOT remove. */
+ PD_MODE_CMD_COUNT,
+};
+
+struct ec_params_usb_pd_set_mode_request {
+ uint32_t cmd; /* enum pd_mode_cmd */
+ uint16_t svid; /* SVID to set */
+ uint8_t opos; /* Object Position */
+ uint8_t port; /* port */
+} __packed;
+
+/* Ask the PD MCU to record a log of a requested type */
+#define EC_CMD_PD_WRITE_LOG_ENTRY 0x118
+
+struct ec_params_pd_write_log_entry {
+ uint8_t type; /* event type : see PD_EVENT_xx above */
+ uint8_t port; /* port#, or 0 for events unrelated to a given port */
+} __packed;
+
+#endif /* !__ACPI__ */
+
/*****************************************************************************/
/*
* Passthru commands
--
2.5.0
