Introduce an AMD accumlated power reporting mechanism for Carrizo
(Family 15h, Model 60h) processor that should be used to calculate the
average power consumed by a processor during a measurement interval.
The feature of accumulated power mechanism is indicated by CPUID
Fn8000_0007_EDX[12].
---------------------------------------------------------------------
* Tsample: compute unit power accumulator sample period
* Tref: the PTSC counter period
* PTSC: performance timestamp counter
* N: the ratio of compute unit power accumulator sample period to the
PTSC period
* Jmax: max compute unit accumulated power which is indicated by
MaxCpuSwPwrAcc MSR C001007b
* Jx/Jy: compute unit accumulated power which is indicated by
CpuSwPwrAcc MSR C001007a
* Tx/Ty: the value of performance timestamp counter which is indicated
by CU_PTSC MSR C0010280
* PwrCPUave: CPU average power
i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007.
N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]].
ii. Read the full range of the cumulative energy value from the new
MSR MaxCpuSwPwrAcc.
Jmax = value returned.
iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC.
Jx = value read from CpuSwPwrAcc and Tx = value read from
PTSC.
iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC.
Jy = value read from CpuSwPwrAcc and Ty = value read from
PTSC.
v. Calculate the average power consumption for a compute unit over
time period (y-x). Unit of result is uWatt.
if (Jy < Jx) // Rollover has occurred
Jdelta = (Jy + Jmax) - Jx
else
Jdelta = Jy - Jx
PwrCPUave = N * Jdelta * 1000 / (Ty - Tx)
----------------------------------------------------------------------
This feature will be implemented both on hwmon and perf that discussed
in mail list before. At current design, it provides one event to
report per package/processor power consumption by counting each
compute unit power value.
Simple example:
root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' make
-j4
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CHK include/generated/timeconst.h
CHK include/generated/bounds.h
CHK include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
SKIPPED include/generated/compile.h
Building modules, stage 2.
Kernel: arch/x86/boot/bzImage is ready (#40)
MODPOST 4225 modules
Performance counter stats for 'system wide':
183.44 mWatts power/power-pkg/
341.837270111 seconds time elapsed
root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' sleep
10
Performance counter stats for 'system wide':
0.18 mWatts power/power-pkg/
10.012551815 seconds time elapsed
Reference:
http://lkml.kernel.org/r/20150831160622.ga29...@nazgul.tnic
Suggested-by: Peter Zijlstra <pet...@infradead.org>
Suggested-by: Ingo Molnar <mi...@kernel.org>
Suggested-by: Borislav Petkov <b...@suse.de>
Signed-off-by: Huang Rui <ray.hu...@amd.com>
Cc: Guenter Roeck <li...@roeck-us.net>
---
Hi,
This series of patches introduces the perf implementation of
accumulated power reporting algorithm. It will calculate the average
power consumption for the processor. The CPU feature flag is
CPUID.8000_0007H:EDX[12].
Changes from v1 -> v2:
- Add a patch to fix the build issue which is reported by kbuild test
robot.
Changes from v2 -> v3:
- Use raw_spinlock_t instead of spinlock_t, because it need meet the
-rt mode use case.
- Use topology_sibling_cpumask to make the cpumask operation easier.
Thanks,
Rui
---
arch/x86/kernel/cpu/Makefile | 1 +
arch/x86/kernel/cpu/perf_event_amd_power.c | 505 +++++++++++++++++++++++++++++
2 files changed, 506 insertions(+)
create mode 100644 arch/x86/kernel/cpu/perf_event_amd_power.c
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 5803130..97f3413 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
ifdef CONFIG_PERF_EVENTS
obj-$(CONFIG_CPU_SUP_AMD) += perf_event_amd.o
perf_event_amd_uncore.o
+obj-$(CONFIG_CPU_SUP_AMD) += perf_event_amd_power.o
ifdef CONFIG_AMD_IOMMU
obj-$(CONFIG_CPU_SUP_AMD) += perf_event_amd_iommu.o
endif
diff --git a/arch/x86/kernel/cpu/perf_event_amd_power.c
b/arch/x86/kernel/cpu/perf_event_amd_power.c
new file mode 100644
index 0000000..a4ab93e
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_amd_power.c
@@ -0,0 +1,505 @@
+/*
+ * Performance events - AMD Processor Power Reporting Mechanism
+ *
+ * Copyright (C) 2016 Advanced Micro Devices, Inc.
+ *
+ * Author: Huang Rui <ray.hu...@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/perf_event.h>
+#include <asm/cpu_device_id.h>
+#include "perf_event.h"
+
+#define MSR_F15H_CU_PWR_ACCUMULATOR 0xc001007a
+#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
+#define MSR_F15H_PTSC 0xc0010280
+
+/*
+ * event code: LSB 8 bits, passed in attr->config
+ * any other bit is reserved
+ */
+#define AMD_POWER_EVENT_MASK 0xFFULL
+
+#define MAX_CUS 8
+
+/*
+ * Acc power status counters
+ */
+#define AMD_POWER_PKG_ID 0
+#define AMD_POWER_EVENTSEL_PKG 1
+
+/*
+ * the ratio of compute unit power accumulator sample period to the
+ * PTSC period
+ */
+static unsigned int cpu_pwr_sample_ratio;
+static unsigned int cores_per_cu;
+static unsigned int cu_num;
+
+/* maximum accumulated power of a compute unit */
+static u64 max_cu_acc_power;
+
+struct power_pmu {
+ raw_spinlock_t lock;
+ struct list_head active_list;
+ struct pmu *pmu; /* pointer to power_pmu_class */
+ local64_t cpu_sw_pwr_ptsc;
+ /*
+ * These two cpumasks is used for avoiding the allocations on
+ * CPU_STARTING phase. Because power_cpu_prepare will be
+ * called on IRQs disabled status.
+ */
+ cpumask_var_t mask;
+ cpumask_var_t tmp_mask;
+};
+
+static struct pmu pmu_class;
+
+/*
+ * Accumulated power is to measure the sum of each compute unit's
+ * power consumption. So it picks only one core from each compute unit
+ * to get the power with MSR_F15H_CU_PWR_ACCUMULATOR. The cpu_mask
+ * represents CPU bit map of all cores which are picked to measure the
+ * power for the compute units that they belong to.
+ */
+static cpumask_t cpu_mask;
+
+static DEFINE_PER_CPU(struct power_pmu *, amd_power_pmu);
+
+static u64 event_update(struct perf_event *event, struct power_pmu *pmu)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u64 prev_raw_count, new_raw_count, prev_ptsc, new_ptsc;
+ u64 delta, tdelta;
+
+again:
+ prev_raw_count = local64_read(&hwc->prev_count);
+ prev_ptsc = local64_read(&pmu->cpu_sw_pwr_ptsc);
+ rdmsrl(event->hw.event_base, new_raw_count);
+ rdmsrl(MSR_F15H_PTSC, new_ptsc);
+
+ if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count) {
+ cpu_relax();
+ goto again;
+ }
+
+ /*
+ * calculate the power comsumption for each compute unit over
+ * a time period, the unit of final value (delta) is
+ * micro-Watts. Then add it into event count.
+ */
+ if (new_raw_count < prev_raw_count) {
+ delta = max_cu_acc_power + new_raw_count;
+ delta -= prev_raw_count;
+ } else
+ delta = new_raw_count - prev_raw_count;
+
+ delta *= cpu_pwr_sample_ratio * 1000;
+ tdelta = new_ptsc - prev_ptsc;
+
+ do_div(delta, tdelta);
+ local64_add(delta, &event->count);
+
+ return new_raw_count;
+}
+
+static void __pmu_event_start(struct power_pmu *pmu,
+ struct perf_event *event)
+{
+ u64 ptsc, counts;
+
+ if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+ return;
+
+ event->hw.state = 0;
+
+ list_add_tail(&event->active_entry, &pmu->active_list);
+
+ rdmsrl(MSR_F15H_PTSC, ptsc);
+ local64_set(&pmu->cpu_sw_pwr_ptsc, ptsc);
+ rdmsrl(event->hw.event_base, counts);
+ local64_set(&event->hw.prev_count, counts);
+}
+
+static void pmu_event_start(struct perf_event *event, int mode)
+{
+ struct power_pmu *pmu = __this_cpu_read(amd_power_pmu);
+
+ raw_spin_lock(&pmu->lock);
+ __pmu_event_start(pmu, event);
+ raw_spin_unlock(&pmu->lock);
+}
+
+static void pmu_event_stop(struct perf_event *event, int mode)
+{
+ struct power_pmu *pmu = __this_cpu_read(amd_power_pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ raw_spin_lock(&pmu->lock);
+
+ /* mark event as deactivated and stopped */
+ if (!(hwc->state & PERF_HES_STOPPED)) {
+ list_del(&event->active_entry);
+ hwc->state |= PERF_HES_STOPPED;
+ }
+
+ /* check if update of sw counter is necessary */
+ if ((mode & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
+ /*
+ * Drain the remaining delta count out of a event
+ * that we are disabling:
+ */
+ event_update(event, pmu);
+ hwc->state |= PERF_HES_UPTODATE;
+ }
+
+ raw_spin_unlock(&pmu->lock);
+}
+
+static int pmu_event_add(struct perf_event *event, int mode)
+{
+ struct power_pmu *pmu = __this_cpu_read(amd_power_pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ raw_spin_lock(&pmu->lock);
+
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+ if (mode & PERF_EF_START)
+ __pmu_event_start(pmu, event);
+
+ raw_spin_unlock(&pmu->lock);
+
+ return 0;
+}
+
+static void pmu_event_del(struct perf_event *event, int flags)
+{
+ pmu_event_stop(event, PERF_EF_UPDATE);
+}
+
+static int pmu_event_init(struct perf_event *event)
+{
+ u64 cfg = event->attr.config & AMD_POWER_EVENT_MASK;
+ int bit, ret = 0;
+
+ /* only look at AMD power events */
+ if (event->attr.type != pmu_class.type)
+ return -ENOENT;
+
+ /* unsupported modes and filters */
+ if (event->attr.exclude_user ||
+ event->attr.exclude_kernel ||
+ event->attr.exclude_hv ||
+ event->attr.exclude_idle ||
+ event->attr.exclude_host ||
+ event->attr.exclude_guest ||
+ event->attr.sample_period) /* no sampling */
+ return -EINVAL;
+
+ if (cfg == AMD_POWER_EVENTSEL_PKG)
+ bit = AMD_POWER_PKG_ID;
+ else
+ return -EINVAL;
+
+ event->hw.event_base = MSR_F15H_CU_PWR_ACCUMULATOR;
+ event->hw.config = cfg;
+ event->hw.idx = bit;
+
+ return ret;
+}
+
+static void pmu_event_read(struct perf_event *event)
+{
+ struct power_pmu *pmu = __this_cpu_read(amd_power_pmu);
+
+ event_update(event, pmu);
+}
+
+static ssize_t get_attr_cpumask(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return cpumap_print_to_pagebuf(true, buf, &cpu_mask);
+}
+
+static DEVICE_ATTR(cpumask, S_IRUGO, get_attr_cpumask, NULL);
+
+static struct attribute *pmu_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL,
+};
+
+static struct attribute_group pmu_attr_group = {
+ .attrs = pmu_attrs,
+};
+
+
+/*
+ * at current, it only supports to report the power of each
+ * processor/package
+ */
+EVENT_ATTR_STR(power-pkg, power_pkg, "event=0x01");
+
+EVENT_ATTR_STR(power-pkg.unit, power_pkg_unit, "mWatts");
+
+/* convert the count from micro-Watts to milli-Watts */
+EVENT_ATTR_STR(power-pkg.scale, power_pkg_scale, "1.000000e-3");
+
+
+static struct attribute *events_attr[] = {
+ EVENT_PTR(power_pkg),
+ EVENT_PTR(power_pkg_unit),
+ EVENT_PTR(power_pkg_scale),
+ NULL,
+};
+
+static struct attribute_group pmu_events_group = {
+ .name = "events",
+ .attrs = events_attr,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *formats_attr[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+static struct attribute_group pmu_format_group = {
+ .name = "format",
+ .attrs = formats_attr,
+};
+
+static const struct attribute_group *attr_groups[] = {
+ &pmu_attr_group,
+ &pmu_format_group,
+ &pmu_events_group,
+ NULL,
+};
+
+static struct pmu pmu_class = {
+ .attr_groups = attr_groups,
+ .task_ctx_nr = perf_invalid_context, /* system-wide only */
+ .event_init = pmu_event_init,
+ .add = pmu_event_add, /* must have */
+ .del = pmu_event_del, /* must have */
+ .start = pmu_event_start,
+ .stop = pmu_event_stop,
+ .read = pmu_event_read,
+};
+
+
+static int power_cpu_exit(int cpu)
+{
+ struct power_pmu *pmu = per_cpu(amd_power_pmu, cpu);
+ int ret = 0;
+ int target = nr_cpumask_bits;
+
+ cpumask_copy(pmu->mask, topology_sibling_cpumask(cpu));
+
+ cpumask_clear_cpu(cpu, &cpu_mask);
+ cpumask_clear_cpu(cpu, pmu->mask);
+
+ if (!cpumask_and(pmu->tmp_mask, pmu->mask, cpu_online_mask))
+ goto out;
+
+ /*
+ * find a new CPU on same compute unit, if was set in cpumask
+ * and still some CPUs on compute unit, then move to the new
+ * CPU
+ */
+ target = cpumask_any(pmu->tmp_mask);
+ if (target < nr_cpumask_bits && target != cpu)
+ cpumask_set_cpu(target, &cpu_mask);
+
+ WARN_ON(cpumask_empty(&cpu_mask));
+
+out:
+ /*
+ * migrate events and context to new CPU
+ */
+ if (target < nr_cpumask_bits)
+ perf_pmu_migrate_context(pmu->pmu, cpu, target);
+
+ return ret;
+
+}
+
+static int power_cpu_init(int cpu)
+{
+ struct power_pmu *pmu = per_cpu(amd_power_pmu, cpu);
+
+ if (pmu)
+ return 0;
+
+ if (!cpumask_and(pmu->mask, topology_sibling_cpumask(cpu),
+ &cpu_mask))
+ cpumask_set_cpu(cpu, &cpu_mask);
+
+ return 0;
+}
+
+static int power_cpu_prepare(int cpu)
+{
+ struct power_pmu *pmu = per_cpu(amd_power_pmu, cpu);
+ int phys_id = topology_physical_package_id(cpu);
+ int ret = 0;
+
+ if (pmu)
+ return 0;
+
+ if (phys_id < 0)
+ return -EINVAL;
+
+ pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
+ if (!pmu)
+ return -ENOMEM;
+
+ if (!zalloc_cpumask_var(&pmu->mask, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (!zalloc_cpumask_var(&pmu->tmp_mask, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ raw_spin_lock_init(&pmu->lock);
+
+ INIT_LIST_HEAD(&pmu->active_list);
+
+ pmu->pmu = &pmu_class;
+
+ per_cpu(amd_power_pmu, cpu) = pmu;
+
+ return 0;
+
+out1:
+ free_cpumask_var(pmu->mask);
+out:
+ kfree(pmu);
+
+ return ret;
+}
+
+static void power_cpu_kfree(int cpu)
+{
+ struct power_pmu *pmu = per_cpu(amd_power_pmu, cpu);
+
+ free_cpumask_var(pmu->mask);
+ free_cpumask_var(pmu->tmp_mask);
+ kfree(pmu);
+}
+
+static int power_cpu_notifier(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (long)hcpu;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_UP_PREPARE:
+ if (power_cpu_prepare(cpu))
+ return NOTIFY_BAD;
+ break;
+ case CPU_STARTING:
+ if (power_cpu_init(cpu))
+ return NOTIFY_BAD;
+ break;
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ power_cpu_kfree(cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ if (power_cpu_exit(cpu))
+ return NOTIFY_BAD;
+ break;
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static const struct x86_cpu_id cpu_match[] = {
+ { .vendor = X86_VENDOR_AMD, .family = 0x15 },
+ {},
+};
+
+static int __init amd_power_pmu_init(void)
+{
+ int i, ret;
+ u64 tmp;
+
+ if (!x86_match_cpu(cpu_match))
+ return 0;
+
+ if (!boot_cpu_has(X86_FEATURE_ACC_POWER))
+ return -ENODEV;
+
+ cores_per_cu = amd_get_cores_per_cu();
+ cu_num = boot_cpu_data.x86_max_cores / cores_per_cu;
+
+ if (WARN_ON_ONCE(cu_num > MAX_CUS))
+ return -EINVAL;
+
+ cpu_pwr_sample_ratio = cpuid_ecx(0x80000007);
+
+ if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) {
+ pr_err("Failed to read max compute unit power accumulator
MSR\n");
+ return -ENODEV;
+ }
+ max_cu_acc_power = tmp;
+
+ cpu_notifier_register_begin();
+
+ /*
+ * Choose the one online core of each compute unit
+ */
+ for (i = 0; i < boot_cpu_data.x86_max_cores; i += cores_per_cu) {
+ /* WARN_ON for empty CU masks */
+ WARN_ON(cpumask_empty(topology_sibling_cpumask(i)));
+ cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(i)),
+ &cpu_mask);
+ }
+
+ for_each_present_cpu(i) {
+ ret = power_cpu_prepare(i);
+ if (ret) {
+ /* unwind on [0 ... i-1] CPUs */
+ while (i--)
+ power_cpu_kfree(i);
+ goto out;
+ }
+ ret = power_cpu_init(i);
+ if (ret) {
+ /* unwind on [0 ... i] CPUs */
+ while (i >= 0)
+ power_cpu_kfree(i--);
+ goto out;
+ }
+ }
+
+ __perf_cpu_notifier(power_cpu_notifier);
+
+ ret = perf_pmu_register(&pmu_class, "power", -1);
+ if (WARN_ON(ret)) {
+ pr_warn("AMD Power PMU registration failed\n");
+ goto out;
+ }
+
+ pr_info("AMD Power PMU detected, %d compute units\n", cu_num);
+
+out:
+ cpu_notifier_register_done();
+
+ return ret;
+}
+device_initcall(amd_power_pmu_init);
--
1.9.1
