On 2015/12/16 22:28, Steven Rostedt wrote:
> On Wed, 16 Dec 2015 18:28:35 +0800
> "Zhang, Yanmin" <yanmin_zh...@linux.intel.com> wrote:
>
>>> +   /*
>>> +    * If the tracing is enabled, go ahead and enable the record.
>>> +    *
>>> +    * The reason not to enable the record immediatelly is the
>>> +    * inherent check of ftrace_make_nop/ftrace_make_call for
>>> +    * correct previous instructions.  Making first the NOP
>>> +    * conversion puts the module to the correct state, thus
>>> +    * passing the ftrace_make_call check.
>>> +    *
>>> +    * We also delay this to after the module code already set the
>>> +    * text to read-only, as we now need to set it back to read-write
>>> +    * so that we can modify the text.
>>> +    */
>>> +   if (ftrace_start_up)
>>> +           ftrace_arch_code_modify_prepare();
>>> +
>>> +   do_for_each_ftrace_rec(pg, rec) {
>>> +           int cnt;
>>> +           /*
>>> +            * do_for_each_ftrace_rec() is a double loop.
>>> +            * module text shares the pg. If a record is
>>> +            * not part of this module, then skip this pg,
>>> +            * which the "break" will do.
>>> +            */
>>> +           if (!within_module_core(rec->ip, mod))
>>> +                   break;
>>> +
>>> +           cnt = 0;
>>> +
>>> +           /*
>>> +            * When adding a module, we need to check if tracers are
>>> +            * currently enabled and if they are, and can trace this record,
>>> +            * we need to enable the module functions as well as update the
>>> +            * reference counts for those function records.
>>> +            */
>>> +           if (ftrace_start_up)
>>> +                   cnt += referenced_filters(rec);
>>> +
>>> +           /* This clears FTRACE_FL_DISABLED */
>>> +           rec->flags = cnt;
>>> +
>>> +           if (ftrace_start_up && cnt) {
>>> +                   int failed = __ftrace_replace_code(rec, 1);  
>> If we choose to call ftrace_module_enable when receiving module notification
>>   MODULE_STATE_COMING, TEXT section of the module is already changed to RO.
> And that's why we call ftrace_arch_code_modify_prepare(). That should
> change all text to RW.

Thanks for the kind pointer. 
We would add codes into your patch based on notifier and send patch to you by
private email.

Yanmin

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to