Linus Torvalds wrote:
>
> The irq is still there, it's just that it's mapped somewhere else. The MP
> table should give the mapping.
>
> Please find the "mptable" program, and run it. If you don't already have
> it on your system, search for it on google or something.. It will print
> out your whole MP table, and that might give a better clue about where irq
> 5 has gone, and what we should do inside the ISA PnP code to find the
> right irq..
>
Currently the system is using IRQ5 for the NE card since I specified it as ISA
in BIOS. Therefore the BIOS has chosen IRQ9, IRQ10 & IRQ11 for internal use.
currently running a UP kernel w/IO_APIC enabled, can switch back to SMP if needed.
dmesg & mptable output below
Martin
MPTABLE
===============================================================================
MPTable, version 2.0.12
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f5ae0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x7d
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0xf1400
signature: 'PCMP'
base table length: 276
version: 1.4
checksum: 0x29
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: (nil)
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 6 5 0xfbff
1 0x11 AP, usable 6 6 5 0xfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID I
NT#
ExtINT conforms conforms 2 0 2 0
INT conforms conforms 2 1 2 1
INT conforms conforms 2 0 2 2
INT conforms conforms 2 3 2 3
INT conforms conforms 2 4 2 4
INT conforms conforms 2 5 2 5
INT conforms conforms 2 6 2 6
INT conforms conforms 2 7 2 7
INT active-hi edge 2 8 2 8
INT conforms conforms 2 12 2 12
INT conforms conforms 2 13 2 13
INT conforms conforms 2 14 2 14
INT conforms conforms 2 15 2 15
INT active-lo level 0 7:D 2 19
INT active-lo level 0 19:A 2 18
INT active-lo level 0 19:B 2 18
INT active-lo level 1 0:A 2 16
SMI conforms conforms 2 0 2 23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC IDtINT#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
-------------------------------------------------------------------------------
kmsg output:
---------------
scanpci output:
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x7190
Intel 82443BX Host
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x8086 device 0x7191
Intel 82443BX AGP
pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x8086 device 0x7110
Intel 82371AB PIIX4 ISA
pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x8086 device 0x7111
Intel 82371AB PIIX4 IDE
pci bus 0x0 cardnum 0x07 function 0x0002: vendor 0x8086 device 0x7112
Intel 82371AB PIIX4 USB
pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x8086 device 0x7113
Intel 82371AB PIIX4 ACPI
pci bus 0x0 cardnum 0x13 function 0x0000: vendor 0x1103 device 0x0004
Device unknown
pci bus 0x0 cardnum 0x13 function 0x0001: vendor 0x1103 device 0x0004
Device unknown
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5246
ATI Rage 128 RF
-----------------
/proc/pci output:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 3).
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 19.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
Bus 0, device 19, function 0:
Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 1).
IRQ 18.
Master Capable. Latency=248. Min Gnt=8.Max Lat=8.
I/O at 0xd400 [0xd407].
I/O at 0xd800 [0xd803].
I/O at 0xdc00 [0xdcff].
Bus 0, device 19, function 1:
Unknown mass storage controller: Triones Technologies, Inc. HPT366 (#2) (rev
1).
IRQ 18.
Master Capable. Latency=248. Min Gnt=8.Max Lat=8.
I/O at 0xe000 [0xe007].
I/O at 0xe400 [0xe403].
I/O at 0xe800 [0xe8ff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc Rage 128 RF (rev 0).
IRQ 16.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd4000000 [0xd7ffffff].
I/O at 0xc000 [0xc0ff].
Non-prefetchable 32 bit memory at 0xd9000000 [0xd9003fff].
------------------------
/proc/interrupts output:
CPU0
0: 3761622 IO-APIC-edge timer
1: 13748 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
5: 104829 IO-APIC-edge NE2000
6: 69 IO-APIC-edge floppy
8: 0 IO-APIC-edge rtc
12: 120937 IO-APIC-edge PS/2 Mouse
13: 0 XT-PIC fpu
14: 623 IO-APIC-edge ide0
15: 6 IO-APIC-edge ide1
NMI: 3761586
ERR: 0
===============================================================================
excerpts from DMESG
Bus #2 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 0, IRQ 1f, APIC ID 2, APIC INT 13
Int: type 0, pol 3, trig 3, bus 0, IRQ 4c, APIC ID 2, APIC INT 12
Int: type 0, pol 3, trig 3, bus 0, IRQ 4d, APIC ID 2, APIC INT 12
Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10
Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
...
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23 not con
nected.
..TIMER: vector=49 pin1=2 pin2=0
activating NMI Watchdog ... done.
number of MP IRQ sources: 18.
...
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 91
13 001 01 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ18 -> 18
IRQ19 -> 19
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
