Hello

Alot of my mailboxes have become corrupt after trying test8-pre2. I'm
back down to test7 and everything seems to be working ok so far. I was
able to forcibly corrupt a couple of mailboxes by reading unread mail
from about a week or so ago and exiting. The mailbox would then be
corrupt from allowing me to only get to messages up until last week
after manually editing the mailbox to remove the garbage in the file.

I think I saw one other person mention fs corruption with test8-pre2.
What is your system configuration? I'm pretty sure it's not a ide
controller/hd problem because my inbox is on one drive and my other
mailboxes are on another drive on a different controller.

Aug 14 13:25:10 viper kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx 
Aug 14 13:25:10 viper kernel: PIIX4: IDE controller on PCI bus 00 dev 39 
Aug 14 13:25:10 viper kernel: PIIX4: not 100% native mode: will probe
irqs later 
Aug 14 13:25:10 viper kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:DMA 
Aug 14 13:25:10 viper kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA 
Aug 14 13:25:10 viper kernel: HPT366: onboard version of chipset, pin1=1
pin2=2 
Aug 14 13:25:10 viper kernel: PCI: HPT366: Fixing interrupt 10 pin 2 to
ZERO  
Aug 14 13:25:10 viper kernel: HPT366: IDE controller on PCI bus 00 dev
98 
Aug 14 13:25:10 viper kernel: HPT366: not 100% native mode: will probe
irqs later 
Aug 14 13:25:10 viper kernel:     ide2: BM-DMA at 0xb400-0xb407, BIOS
settings: hde:DMA, hdf:pio 
Aug 14 13:25:10 viper kernel: HPT366: IDE controller on PCI bus 00 dev
99 
Aug 14 13:25:10 viper kernel: HPT366: not 100% native mode: will probe
irqs later 
Aug 14 13:25:10 viper kernel:     ide3: BM-DMA at 0xc000-0xc007, BIOS
settings: hdg:pio, hdh:pio 
Aug 14 13:25:10 viper kernel: hda: IBM-DJNA-371350, ATA DISK drive 
Aug 14 13:25:10 viper kernel: hdb: CREATIVEDVD-ROM DVD2240E 12/24/97,
ATAPI CDROM drive 
Aug 14 13:25:10 viper kernel: hdc: Maxtor 91152D8, ATA DISK drive 
Aug 14 13:25:10 viper kernel: hdd: Maxtor 82160D2, ATA DISK drive 
Aug 14 13:25:10 viper kernel: hde: Maxtor 53073U6, ATA DISK drive 
Aug 14 13:25:10 viper kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Aug 14 13:25:10 viper kernel: ide1 at 0x170-0x177,0x376 on irq 15 
Aug 14 13:25:10 viper kernel: ide2 at 0xac00-0xac07,0xb002 on irq 10 
Aug 14 13:25:10 viper kernel: hda: IBM-DJNA-371350, 12949MB w/1966kB
Cache, CHS=1650/255/63, UDMA(33) 
Aug 14 13:25:10 viper kernel: hdc: Maxtor 91152D8, 10991MB w/256kB
Cache, CHS=22332/16/63, UDMA(33) 
Aug 14 13:25:10 viper kernel: hdd: Maxtor 82160D2, 2060MB w/256kB Cache,
CHS=4465/15/63, UDMA(33) 
Aug 14 13:25:10 viper kernel: hde: Maxtor 53073U6, 29311MB w/2048kB
Cache, CHS=59554/16/63, UDMA(66) 
Aug 14 13:25:10 viper kernel: hdb: ATAPI 24X DVD-ROM drive, 256kB Cache,
DMA 

-- 

=====================================================================
Mohammad A. Haque                              http://www.haque.net/ 
                                               [EMAIL PROTECTED]

  "Alcohol and calculus don't mix.             Project Lead
   Don't drink and derive." --Unknown          http://wm.themes.org/
                                               [EMAIL PROTECTED]
=====================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/

Reply via email to