Hi folks,
At boot time of the current pre2 kernel I've got 4 internal errors,
then it blocked. After booting the old kernel I have found this in
kern.log:
:
:
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c010f8a8
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[kill_sl_info+0/104]
EFLAGS: 00010202
eax: 00000000 ebx: 0000000a ecx: c1209124 edx: c1209000
esi: c7e8bf40 edi: bffff370 ebp: c13f6544 esp: c7e8bec4
ds: 0018 es: 0018 ss: 0018
Process rcS (pid: 60, stackpage=c7e8b000)
Stack: c7e8bf40 0000000a bffff370 0000000a c010f9d1 0000000a c7e8bf40 c13f6544
c7e8bf40 0000000a bffff370 c7e8bf40 c010fce5 0000000a c7e8bf40 c1216000
c7e8a000 00000000 c010fda3 0000000a c7e8bf40 00000001 c7e8a000 00000000
Call Trace: [kill_something_info+193/216] [sys_rt_sigprocmask+341/432]
[sys_rt_sigpending+99/128] [sys_sigprocmask+250/344] [path_walk+704/1912]
[register_binfmt+2/76] [device_not_available+60/64]
[tracesys+3/35]
Code: 89 08 89 4d 04 85 f6 74 07 83 fe 01 74 2b eb 4a b8 00 e0 ff
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 4.13 detected OK (220)
sb: I/O region in use.
Sound: Hmm, DMA1 was left allocated - fixed
Sound: Hmm, DMA6 was left allocated - fixed
Unable to handle kernel paging request at virtual address c8866080
printing eip:
c885844d
*pde = 012d7063
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[rtc:__insmod_rtc_O/lib/modules/2.4.0-test8/kernel/drivers/char/+-7091/96]
EFLAGS: 00010282
eax: c8866080 ebx: c120cd20 ecx: 00000000 edx: 00000000
esi: c1282660 edi: 00000000 ebp: 00000000 esp: c7ad9f08
ds: 0018 es: 0018 ss: 0018
Process aumix (pid: 63, stackpage=c7ad9000)
Stack: 00000000 c1282660 c7db86a0 c128e6e0 00000000 c1282660 c7db86a0 c128e6e0
72616863 6a616d2d 312d726f c1280034 ffffffeb c01286a4 c7db86a0 c1282660
c1282660 c7db86a0 00000000 c01279b9 c7db86a0 c1282660 00000002 0804ddb4
Call Trace: [fput+12/24] [sys_vhangup+5/60] [filp_close+3/92] [sys_read+41/168]
[tracesys+3/35]
Code: 8b 10 85 d2 74 1d 52 e8 0f d0 8b f7 83 c4 04 85 c0 74 14 8b
Real Time Clock Driver v1.10c
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.111/1.93/1.135/1.77/none/1.5 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.39
HiSax: Layer2 Revision 2.23
HiSax: TeiMgr Revision 2.15
HiSax: Layer3 Revision 2.14
HiSax: LinkLayer Revision 2.47
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles 8.0/16.0 driver Rev. 2.12
HiSax: Teles 16.0 config irq:15 mem:0xC00D0000 cfg:0xD80
Teles0: ISAC version (60): 2085 V2.3
Teles0: HSCX version A: V2.1 B: V2.1
Teles 16.0: IRQ 15 count 0
Teles 16.0: IRQ 15 count 3
HiSax: DSS1 Rev. 2.29
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
isdn: Verbose-Level is 2
HiSax: debugging flags card 1 set to 4
ippp, open, slot: 0, minor: 0, state: 0000
ippp_ccp: allocated reset data structure c7513800
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
Unable to handle kernel paging request at virtual address b9000016
printing eip:
c0115475
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[qm_modules+301/312]
EFLAGS: 00010282
eax: 00000001 ebx: c120cd40 ecx: 00000003 edx: b9000002
esi: c75c0740 edi: 00000003 ebp: 00000003 esp: c728df00
ds: 0018 es: 0018 ss: 0018
Process au (pid: 230, stackpage=c728d000)
Stack: c8858459 b9000002 00000000 c75c0740 c78130c0 c128e6e0 00000000 c75c0740
c78130c0 c128e6e0 080495a0 00000001 c72f4820 c7fdf005 ffffffeb c01286a4
c78130c0 c75c0740 c75c0740 c78130c0 00000000 c01279b9 c78130c0 c75c0740
Call Trace: [rtc:__insmod_rtc_O/lib/modules/2.4.0-test8/kernel/drivers/char/+-7079/96]
[fput+12/24] [sys_vhangup+5/60] [filp_close+3/92] [sys_read+41/168] [tracesys+3/35]
Code: f6 42 14 02 74 05 31 c0 c3 89 f6 ff 42 10 80 4a 14 18 c3 b8
Unable to handle kernel paging request at virtual address b9000016
printing eip:
c0115475
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[qm_modules+301/312]
EFLAGS: 00010282
eax: 00000001 ebx: c120cd40 ecx: 00000003 edx: b9000002
esi: c7340840 edi: 00000003 ebp: 00000003 esp: c7209f00
ds: 0018 es: 0018 ss: 0018
Process rplayd (pid: 241, stackpage=c7209000)
Stack: c8858459 b9000002 00000000 c7340840 c78130c0 c128e6e0 00000000 c7340840
c78130c0 c128e6e0 00000001 00000001 c013103c 0000001d 00000287 c01286a4
c78130c0 c7340840 c7340840 c78130c0 00000000 c01279b9 c78130c0 c7340840
Call Trace: [rtc:__insmod_rtc_O/lib/modules/2.4.0-test8/kernel/drivers/char/+-7079/96]
[path_walk+532/1912] [fput+12/24] [sys_vhangup+5/60] [filp_close+3/92]
[sys_read+41/168] [tracesys+3/35]
Code: f6 42 14 02 74 05 31 c0 c3 89 f6 ff 42 10 80 4a 14 18 c3 b8
OPEN: 146.225.224.201 -> 146.225.224.69 UDP, port: 123 -> 123
ippp0: dialing 1 0xxxxxxxxxx...
It seems that all problems are related to loadable module support.
modutils is 2.3.14. CONFIG_MODVERSIONS is not set.
How can I help to fix this problem?
I am not quite sure about the kernel bug report policy, so please
forgive me if something is wrong or missing.
Regards
Harri
--
Harald Dunkel | [EMAIL PROTECTED] | If your operating system seems to
Synopsys GmbH | Kaiserstr. 100 | be made by Dr. Frankenstein, then
52134 Herzogenrath, Germany | it is time for a change.
+49 2407 9558 (fax? 44: 0) | Try Linux!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
