On Thursday 10 October 2002 10:55 pm, Noam Meltzer wrote: > You might want to add such a line: > BusID "PCI:1:0:0" > into your 'Section "Device"' in the XF86Config file. > it helped for me.
not for me. > also you might want to upgrade the version of the nvidia driver. > its already the latest from NVidia. tal. > Noam > > On Tue, 2002-10-08 at 01:53, Amir Tal wrote: > > this is mandrake 9, fresh install . > > my card is NVidia GEforce MX. everything worked very nicly after > > installation. i rebooted the machine today, and X will not load. it > > complains that "no screens found", which is kinda redicules since i didnt > > change anything in the config file, and didnt change anything in my > > hardware since the last time it worked. > > > > the only modifications i did was to add the "load glx" option for 3d > > support, and changed the driver name from "nv" to "nvidia" (had to do > > that for playing quake ;) > > > > the only way to load X now, is to change it back to "nv" and to disable > > glx support. > > NVidia drivers are installed (from the nvidia website) and the NVdriver > > module is loaded. > > > > XFree version is 4.2.1 > > > > my XF86Config-4 is attached. > > > > help...? > > tal. > > ---- > > > > > > # File generated by XFdrake. > > > > # ********************************************************************** > > # Refer to the XF86Config man page for details about the format of > > # this file. > > # ********************************************************************** > > > > Section "Files" > > # Multiple FontPath entries are allowed (they are concatenated > > together) # By default, Mandrake 6.0 and later now use a font server > > independent of # the X server to render fonts. > > FontPath "unix/:-1" > > EndSection > > > > Section "ServerFlags" > > #DontZap # disable <Crtl><Alt><BS> (server abort) > > #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) > > AllowMouseOpenFail # allows the server to start up even if the mouse > > doesn't work EndSection > > > > Section "Module" > > Load "dbe" # Double-Buffering Extension > > Load "v4l" # Video for Linux > > Load "extmod" > > Load "type1" > > Load "freetype" > > # Load "glx" # 3D layer > > EndSection > > > > Section "InputDevice" > > Identifier "Keyboard1" > > Driver "Keyboard" > > Option "XkbModel" "pc105" > > Option "XkbLayout" "us_intl" > > Option "XkbOptions" "" > > EndSection > > > > Section "InputDevice" > > Identifier "Mouse1" > > Driver "mouse" > > Option "Protocol" "IMPS/2" > > Option "Device" "/dev/psaux" > > Option "ZAxisMapping" "4 5" > > EndSection > > > > Section "Monitor" > > Identifier "monitor1" > > VendorName "Plug'n Play" > > HorizSync 30-96 > > VertRefresh 50-160 > > > > # Sony Vaio C1(X,XS,VE,VN)? > > # 1024x480 @ 85.6 Hz, 48 kHz hsync > > ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 > > -hsync -vsync > > > > # TV fullscreen mode or DVD fullscreen output. > > # 768x576 @ 79 Hz, 50 kHz hsync > > ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 > > > > # 768x576 @ 100 Hz, 61.6 kHz hsync > > ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 > > EndSection > > > > Section "Device" > > Identifier "device1" > > VendorName "nVidia Corporation" > > BoardName "NVIDIA GeForce2 DDR (generic)" > > Driver "nv" > > Option "DPMS" > > EndSection > > > > Section "Screen" > > Identifier "screen1" > > Device "device1" > > Monitor "monitor1" > > DefaultColorDepth 24 > > > > Subsection "Display" > > Depth 8 > > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" > > "640x480" EndSubsection > > > > Subsection "Display" > > Depth 15 > > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" > > "640x480" EndSubsection > > > > Subsection "Display" > > Depth 16 > > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" > > "640x480" EndSubsection > > > > Subsection "Display" > > Depth 24 > > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" > > "640x480" EndSubsection > > EndSection > > > > Section "ServerLayout" > > Identifier "layout1" > > InputDevice "Keyboard1" "CoreKeyboard" > > InputDevice "Mouse1" "CorePointer" > > Screen "screen1" > > EndSection ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
