You might want to add such a line: BusID "PCI:1:0:0" into your 'Section "Device"' in the XF86Config file. it helped for me. also you might want to upgrade the version of the nvidia driver.
Noam On Tue, 2002-10-08 at 01:53, Amir Tal wrote: > this is mandrake 9, fresh install . > my card is NVidia GEforce MX. everything worked very nicly after installation. > i rebooted the machine today, and X will not load. it complains that "no > screens found", which is kinda redicules since i didnt change anything in the > config file, and didnt change anything in my hardware since the last time it > worked. > > the only modifications i did was to add the "load glx" option for 3d support, > and changed the driver name from "nv" to "nvidia" (had to do that for playing > quake ;) > > the only way to load X now, is to change it back to "nv" and to disable glx > support. > NVidia drivers are installed (from the nvidia website) and the NVdriver module > is loaded. > > XFree version is 4.2.1 > > my XF86Config-4 is attached. > > help...? > tal. > ---- > > # File generated by XFdrake. > > # ********************************************************************** > # Refer to the XF86Config man page for details about the format of > # this file. > # ********************************************************************** > > Section "Files" > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Mandrake 6.0 and later now use a font server independent of > # the X server to render fonts. > FontPath "unix/:-1" > EndSection > > Section "ServerFlags" > #DontZap # disable <Crtl><Alt><BS> (server abort) > #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) > AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work > EndSection > > Section "Module" > Load "dbe" # Double-Buffering Extension > Load "v4l" # Video for Linux > Load "extmod" > Load "type1" > Load "freetype" > # Load "glx" # 3D layer > EndSection > > Section "InputDevice" > Identifier "Keyboard1" > Driver "Keyboard" > Option "XkbModel" "pc105" > Option "XkbLayout" "us_intl" > Option "XkbOptions" "" > EndSection > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/psaux" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "monitor1" > VendorName "Plug'n Play" > HorizSync 30-96 > VertRefresh 50-160 > > # Sony Vaio C1(X,XS,VE,VN)? > # 1024x480 @ 85.6 Hz, 48 kHz hsync > ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync >-vsync > > # TV fullscreen mode or DVD fullscreen output. > # 768x576 @ 79 Hz, 50 kHz hsync > ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 > > # 768x576 @ 100 Hz, 61.6 kHz hsync > ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 > EndSection > > Section "Device" > Identifier "device1" > VendorName "nVidia Corporation" > BoardName "NVIDIA GeForce2 DDR (generic)" > Driver "nv" > Option "DPMS" > EndSection > > Section "Screen" > Identifier "screen1" > Device "device1" > Monitor "monitor1" > DefaultColorDepth 24 > > Subsection "Display" > Depth 8 > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" > EndSubsection > > Subsection "Display" > Depth 15 > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" > EndSubsection > > Subsection "Display" > Depth 16 > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" > EndSubsection > > Subsection "Display" > Depth 24 > Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" > EndSubsection > EndSection > > Section "ServerLayout" > Identifier "layout1" > InputDevice "Keyboard1" "CoreKeyboard" > InputDevice "Mouse1" "CorePointer" > Screen "screen1" > EndSection -- Noam Meltzer [EMAIL PROTECTED] ICQ: 4853872 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
