Hi,
(1) I've been able to use an analog modem (data mode) on a Toshiba laptop _WHILE_ using ADSL (I was browsing the ADSL-HOWTO with analog modem/laptop in order to setup the ADSL on the linux/desktop. So nice to have 2 computers at home ...). (2) Has the modem (in both data and fax) worked recently at all ? What I'm saying, is that I've had at least 2 modems break down over the last 5 years. Put your modem (data+fax) to the test in conditions you know it worked in, try taking it to a friend's house with regular phone line and see if it works. I recall that the "NO DIALTONE" error was the symptom to a faulty modem (in my case). (2) Could be that this particular modem does not handle well the MicroFilter situation. Could be that your modem's error handling is not good enough to handle the noise that comes from the high freq. range used by ADSL. Recall that you're using a non-ideal and passive filter, so some noise does pass from ADSL freq. range to lower/regular phone line freq. range. Maybe get a firmware update for the modem ? But test if the modem works at all. I would not relate this to wiring problems, the same modem-phone-jack-in-wall setup that you've used prior to ADSL should work. Good Luck Gal. Yedidyah Bar-David wrote: > On Wed, May 29, 2002 at 12:41:11AM +0300, Barak Kaufman wrote: > > all the filter does is split the frequencies (low frequencies range goes to > > teh phone , hish to the adsl). probably what happens is that the modem doesnt > > recognise the "filtered" dialtone, what u can do is try to override the > > dialtone detection in the modem with aATX1 init string. > > Thanks, I will try that. > > > > > > Hi all, > > > > > > Sorry for being off-topic, but I am desperate. I asked whoever I know > > > who has adsl, computer and electric equipment stores, bezeq, STFW ... > > > And I have a suspicion that there are here some people with much better > > > knowledge than me about phones stuff. > > > > > > My problem: I can't use an analog modem with the microfilter bezeq > > > gave me for adsl, e.g. I can't send a fax while being connected to > > > adsl. When I try, the modem says 'NO DIALTONE'. > > > > [snipped] > > -- > > Barak Kaufman > > Customer Support Manager > > Oz-Tech Information Systems > > Didi > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] -- Regards, Gal Aviel.
begin:vcard n:Aviel;Gal tel;fax:972-4-8551786 tel;work:972-4-8551550 x-mozilla-html:FALSE org:Zoran Microelectronics Ltd.;DTV Team version:2.1 email;internet:[EMAIL PROTECTED] title:VLSI Design Engineer adr;quoted-printable:;;Advanced Technology Center=0D=0AP.O.B 2495;Haifa;;31204;Israel x-mozilla-cpt:;6224 fn:Gal Aviel end:vcard
