Hi,
Sorry to disturb you again, but I still need some
help, It seams that the ALSA drivers did not make the
trick or that I'm missing some thing. Actually my
situation got worse after installing ALSA.
What I did is :
1) Compiled a kernel (2.2.5-15) which has the "Sound
card support = Y" and every thing else set to "n" (As
the ALSA HOW-TO ordered)
2) I installed the drivers, lib and utiles using the
normal "./configure ; make ; make install"
3) Run the sdndevices script to create the ALSA
devices.
4) Loaded the snd-card-via686a module
5) Set the mixer volume to max
6) Tried to use the device
But it’s doing nothing. Cutting an au file to the
device show no error, it just not making any sound at
all. Using sound applications like XmmsMP3 give en
error which say that "Can't open audio"
/proc/modules show the following :
snd-card-via686a 6896 0
snd-pcm 28952 0 [snd-pcm]
snd-timer 7680 0 [snd-card-via686a]
snd-ac97-codec 24064 0 [snd-card-via686a]
snd-mixer 23120 0 [snd-ac97-codec]
snd-mpu401-uart 1916 0 [snd-card-via686a]
snd-rawmidi 9048 0 [snd-mpu401-uart]
snd-seq-device 3436 0 [snd-rawmidi]
snd 35424 1 [snd-card-via686a snd-pc snd-timer
snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi
snd-seq-device]
/proc/asound/cards show :
0 [card1 ]: VIA686A – VIA 82C686A
VIA 82C686A at 0xe000, irq 11
/dev/sndstat doesn’t exist but /proc/asound/sndstat
shows :
Sound Driver:3.8.1a-980706 (ALSA v0.5.10a emulation
code)
Kernel: Linux localhost.localdomain 2.2.5-15 #21 Mon
Jan 15 23:15:39 IST 2001 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
VIA 82C686A at 0xe000, irq 11
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED BY CONFIG
Midi devices:
0: MPU-401 (UART)
Timers:
7: system timer
Mixers: NOT ENABLED BY CONFIG
So, I’m pretty much in a loss here. I have no clue on
how to proceed from here.
If you have any Ideas I’ll appreciate your guidance.
Thanks
Erez
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
