>
> On Sat, 15 Jul 2000, Noam Meltzer wrote:
>
>
> > 3HD - Primary Master
> > Secondary Master
> > Secondary Slave
> > The CD is Primary Slave
> > I have aSuse 6.4 (kernel 2.2.14)
> > Now everything was working just fine until I had to disconnect one of
> > the HD - the Secondary Master. The other drives stayed just how they
> > were defined.
> > Now when I booted my machine I discovered that instead of LILO I get a
> > nonstopping 01 (or was it 10, i can't remember now) with spaces between
>
> 01 usually means disk does not exist. Probably lilo tries to access
> something on /dev/hdd. This is probably bios disk 0x81, but lilo thinks
> it is something else. Please show your lilo.conf file. Also tell on
> which partition is every directory listed in the file.
>
> You might need to force setting such as
>
> disk = /dev/hdd
> bios = 0x81
>
> or something similar.
>
I do not know if it is that you simply did not mention it or that you really
did not do it.
Do not you have to change the secondary slave jumper from slave to master when
making such a change? Perhaps some BIOS reconfiguration is required? Does
Windows can see all your HDs
>
> --
> Matan Ziv-Av. [EMAIL PROTECTED]
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
--
-- Shaul Karl <[EMAIL PROTECTED]>
Donate free food to the world's hungry: see http://www.thehungersite.com
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
