From: Bobby Eshleman <[email protected]> Add tests for the /proc/sys/net/vsock/ns_mode interface. Namely, that it accepts "global" and "local" strings and enforces a write-once policy.
Start a convention of commenting the test name over the test description. Add test name comments over test descriptions that existed before this convention. Add a check_netns() function that checks if the test requires namespaces and if the current kernel supports namespaces. Skip tests that require namespaces if the system does not have namespace support. Add a test to verify that guest VMs with an active G2H transport (virtio-vsock) cannot set namespace mode to 'local'. This validates the mutual exclusion between G2H transports and LOCAL mode. This patch is the first to add tests that do *not* re-use the same shared VM. For that reason, it adds a run_tests() function to run these tests and filter out the shared VM tests. Signed-off-by: Bobby Eshleman <[email protected]> --- Changes in v11: - Document ns_ prefix above TEST_NAMES (Stefano) Changes in v10: - Remove extraneous add_namespaces/del_namespaces calls. - Rename run_tests() to run_ns_tests() since it is designed to only run ns tests. Changes in v9: - add test ns_vm_local_mode_rejected to check that guests cannot use local mode --- tools/testing/selftests/vsock/vmtest.sh | 143 +++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh index e32997db322d..2e077e8a1777 100755 --- a/tools/testing/selftests/vsock/vmtest.sh +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -41,14 +41,43 @@ readonly KERNEL_CMDLINE="\ virtme.ssh virtme_ssh_channel=tcp virtme_ssh_user=$USER \ " readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) -readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) + +# Namespace tests must use the ns_ prefix. This is checked in check_netns() and +# is used to determine if a test needs namespace setup before test execution. +readonly TEST_NAMES=( + vm_server_host_client + vm_client_host_server + vm_loopback + ns_host_vsock_ns_mode_ok + ns_host_vsock_ns_mode_write_once_ok + ns_vm_local_mode_rejected +) readonly TEST_DESCS=( + # vm_server_host_client "Run vsock_test in server mode on the VM and in client mode on the host." + + # vm_client_host_server "Run vsock_test in client mode on the VM and in server mode on the host." + + # vm_loopback "Run vsock_test using the loopback transport in the VM." + + # ns_host_vsock_ns_mode_ok + "Check /proc/sys/net/vsock/ns_mode strings on the host." + + # ns_host_vsock_ns_mode_write_once_ok + "Check /proc/sys/net/vsock/ns_mode is write-once on the host." + + # ns_vm_local_mode_rejected + "Test that guest VM with G2H transport cannot set namespace mode to 'local'" ) -readonly USE_SHARED_VM=(vm_server_host_client vm_client_host_server vm_loopback) +readonly USE_SHARED_VM=( + vm_server_host_client + vm_client_host_server + vm_loopback + ns_vm_local_mode_rejected +) readonly NS_MODES=("local" "global") VERBOSE=0 @@ -205,6 +234,20 @@ check_deps() { fi } +check_netns() { + local tname=$1 + + # If the test requires NS support, check if NS support exists + # using /proc/self/ns + if [[ "${tname}" =~ ^ns_ ]] && + [[ ! -e /proc/self/ns ]]; then + log_host "No NS support detected for test ${tname}" + return 1 + fi + + return 0 +} + check_vng() { local tested_versions local version @@ -528,6 +571,32 @@ log_guest() { LOG_PREFIX=guest log "$@" } +test_ns_host_vsock_ns_mode_ok() { + for mode in "${NS_MODES[@]}"; do + if ! ns_set_mode "${mode}0" "${mode}"; then + return "${KSFT_FAIL}" + fi + done + + return "${KSFT_PASS}" +} + +test_ns_host_vsock_ns_mode_write_once_ok() { + for mode in "${NS_MODES[@]}"; do + local ns="${mode}0" + if ! ns_set_mode "${ns}" "${mode}"; then + return "${KSFT_FAIL}" + fi + + # try writing again and expect failure + if ns_set_mode "${ns}" "${mode}"; then + return "${KSFT_FAIL}" + fi + done + + return "${KSFT_PASS}" +} + test_vm_server_host_client() { if ! vm_vsock_test "init_ns" "server" 2 "${TEST_GUEST_PORT}"; then return "${KSFT_FAIL}" @@ -569,6 +638,26 @@ test_vm_loopback() { return "${KSFT_PASS}" } +test_ns_vm_local_mode_rejected() { + # Guest VMs have a G2H transport (virtio-vsock) active, so they + # should not be able to set namespace mode to 'local'. + # This test verifies that the sysctl write fails as expected. + + # Try to set local mode in the guest's init_ns + if vm_ssh init_ns "echo local | tee /proc/sys/net/vsock/ns_mode &>/dev/null"; then + return "${KSFT_FAIL}" + fi + + # Verify mode is still 'global' + local mode + mode=$(vm_ssh init_ns "cat /proc/sys/net/vsock/ns_mode") + if [[ "${mode}" != "global" ]]; then + return "${KSFT_FAIL}" + fi + + return "${KSFT_PASS}" +} + shared_vm_test() { local tname @@ -601,6 +690,11 @@ run_shared_vm_tests() { continue fi + if ! check_netns "${arg}"; then + check_result "${KSFT_SKIP}" "${arg}" + continue + fi + run_shared_vm_test "${arg}" check_result "$?" "${arg}" done @@ -654,6 +748,49 @@ run_shared_vm_test() { return "${rc}" } +run_ns_tests() { + for arg in "${ARGS[@]}"; do + if shared_vm_test "${arg}"; then + continue + fi + + if ! check_netns "${arg}"; then + check_result "${KSFT_SKIP}" "${arg}" + continue + fi + + add_namespaces + + name=$(echo "${arg}" | awk '{ print $1 }') + log_host "Executing test_${name}" + + host_oops_before=$(dmesg 2>/dev/null | grep -c -i 'Oops') + host_warn_before=$(dmesg --level=warn 2>/dev/null | grep -c -i 'vsock') + eval test_"${name}" + rc=$? + + host_oops_after=$(dmesg 2>/dev/null | grep -c -i 'Oops') + if [[ "${host_oops_after}" -gt "${host_oops_before}" ]]; then + echo "FAIL: kernel oops detected on host" | log_host + check_result "${KSFT_FAIL}" "${name}" + del_namespaces + continue + fi + + host_warn_after=$(dmesg --level=warn 2>/dev/null | grep -c -i 'vsock') + if [[ "${host_warn_after}" -gt "${host_warn_before}" ]]; then + echo "FAIL: kernel warning detected on host" | log_host + check_result "${KSFT_FAIL}" "${name}" + del_namespaces + continue + fi + + check_result "${rc}" "${name}" + + del_namespaces + done +} + BUILD=0 QEMU="qemu-system-$(uname -m)" @@ -699,6 +836,8 @@ if shared_vm_tests_requested "${ARGS[@]}"; then terminate_pidfiles "${pidfile}" fi +run_ns_tests "${ARGS[@]}" + echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" echo "Log: ${LOG}" -- 2.47.3
