Create a dedicated function to add a GPIO desc in the forwarder. Instead of
passing an array of GPIO desc, now the GPIO desc are passed on by one to
the forwarder.

Signed-off-by: Thomas Richard <[email protected]>
---
 drivers/gpio/gpio-aggregator.c | 57 +++++++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 17 deletions(-)

diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index 4268ef94914d..78bb84ca8a05 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -509,6 +509,10 @@ devm_gpiochip_fwd_alloc(struct device *dev, unsigned int 
ngpios)
        if (!fwd)
                return ERR_PTR(-ENOMEM);
 
+       fwd->descs = devm_kcalloc(dev, ngpios, sizeof(*fwd->descs), GFP_KERNEL);
+       if (!fwd->descs)
+               return ERR_PTR(-ENOMEM);
+
        chip = &fwd->chip;
 
        chip->label = label;
@@ -528,6 +532,39 @@ devm_gpiochip_fwd_alloc(struct device *dev, unsigned int 
ngpios)
        return fwd;
 }
 
+static int gpiochip_fwd_gpio_add(struct gpiochip_fwd *fwd,
+                                struct gpio_desc *desc,
+                                unsigned int offset)
+{
+       struct gpio_chip *parent = gpiod_to_chip(desc);
+       struct gpio_chip *chip = &fwd->chip;
+
+       if (offset > chip->ngpio)
+               return -EINVAL;
+
+       if (fwd->descs[offset])
+               return -EEXIST;
+
+       /*
+        * If any of the GPIO lines are sleeping, then the entire forwarder
+        * will be sleeping.
+        * If any of the chips support .set_config(), then the forwarder will
+        * support setting configs.
+        */
+       if (gpiod_cansleep(desc))
+               chip->can_sleep = true;
+
+       if (parent && parent->set_config)
+               chip->set_config = gpio_fwd_set_config;
+
+       fwd->descs[offset] = desc;
+
+       dev_dbg(chip->parent, "%u => gpio %d irq %d\n", offset,
+               desc_to_gpio(desc), gpiod_to_irq(desc));
+
+       return 0;
+}
+
 /**
  * gpiochip_fwd_create() - Create a new GPIO forwarder
  * @dev: Parent device pointer
@@ -559,26 +596,12 @@ static struct gpiochip_fwd *gpiochip_fwd_create(struct 
device *dev,
 
        chip = &fwd->chip;
 
-       /*
-        * If any of the GPIO lines are sleeping, then the entire forwarder
-        * will be sleeping.
-        * If any of the chips support .set_config(), then the forwarder will
-        * support setting configs.
-        */
        for (i = 0; i < ngpios; i++) {
-               struct gpio_chip *parent = gpiod_to_chip(descs[i]);
-
-               dev_dbg(dev, "%u => gpio %d irq %d\n", i,
-                       desc_to_gpio(descs[i]), gpiod_to_irq(descs[i]));
-
-               if (gpiod_cansleep(descs[i]))
-                       chip->can_sleep = true;
-               if (parent && parent->set_config)
-                       chip->set_config = gpio_fwd_set_config;
+               error = gpiochip_fwd_gpio_add(fwd, descs[i], i);
+               if (error)
+                       return ERR_PTR(error);
        }
 
-       fwd->descs = descs;
-
        if (chip->can_sleep)
                mutex_init(&fwd->mlock);
        else

-- 
2.39.5


Reply via email to