Hello, This series adds initial support for the Marvell PXA1908 SoC and "samsung,coreprimevelte", a smartphone using the SoC.
USB works and the phone can boot a rootfs from an SD card, but there are some warnings in the dmesg: During SMP initialization: [ 0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000 [ 0.006542] CPU features: Unsupported CPU feature variation detected. [ 0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032] [ 0.010710] Detected VIPT I-cache on CPU2 [ 0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000 [ 0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032] [ 0.014849] Detected VIPT I-cache on CPU3 [ 0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000 [ 0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032] SMMU probing fails: [ 0.101798] arm-smmu c0010000.iommu: probing hardware configuration... [ 0.101809] arm-smmu c0010000.iommu: SMMUv1 with: [ 0.101816] arm-smmu c0010000.iommu: no translation support! A 3.14 based Marvell tree is available on GitHub acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub CoderCharmander/g361f-kernel. Andreas Färber attempted to upstream support for this SoC in 2017: https://lore.kernel.org/lkml/20170222022929.10540-1-afaer...@suse.de/ Signed-off-by: Duje Mihanović <duje.mihano...@skole.hr> --- Changes in v14: - Rebase on v6.13-rc7, dropping everything except DT - Link to v13: https://lore.kernel.org/r/20241001-pxa1908-lkml-v13-0-6b9a7f64f...@skole.hr Changes in v13: - Better describe the hardware in bindings/arm commit message - Rebase on v6.12-rc1 - Link to v12: https://lore.kernel.org/r/20240823-pxa1908-lkml-v12-0-cc3ada51b...@skole.hr Changes in v12: - Rebase on v6.11-rc4 - Fix schmitt properties in accordance with 78d8815031fb ("dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties") - Drop a few redundant includes in clock drivers - Link to v11: https://lore.kernel.org/r/20240730-pxa1908-lkml-v11-0-21dbb3e28...@skole.hr Changes in v11: - Rebase on v6.11-rc1 (conflict with DTS Makefile), no changes - Link to v10: https://lore.kernel.org/r/20240424-pxa1908-lkml-v10-0-36cdfb584...@skole.hr Changes in v10: - Update trailers - Rebase on v6.9-rc5 - Clock driver changes: - Add a couple of forgotten clocks in APBC - The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag - The IDs and register offsets were already present, but I forgot to actually register them - Split each controller block into own file - Drop unneeded -of in clock driver filenames - Simplify struct pxa1908_clk_unit - Convert to platform driver - Add module metadata - DTS changes: - Properly name pinctrl nodes - Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells - Fix pinctrl input-schmitt configuration - Link to v9: https://lore.kernel.org/20240402-pxa1908-lkml-v9-0-25a003e83...@skole.hr Changes in v9: - Update trailers and rebase on v6.9-rc2, no changes - Link to v8: https://lore.kernel.org/20240110-pxa1908-lkml-v8-0-fea768a59...@skole.hr Changes in v8: - Drop SSPA patch - Drop broken-cd from eMMC node - Specify S-Boot hardcoded initramfs location in device tree - Add ARM PMU node - Correct inverted modem memory base and size - Update trailers - Rebase on next-20240110 - Link to v7: https://lore.kernel.org/20231102-pxa1908-lkml-v7-0-cabb1a0cb...@skole.hr and https://lore.kernel.org/20231102152033.5511-1-duje.mihano...@skole.hr Changes in v7: - Suppress SND_MMP_SOC_SSPA on ARM64 - Update trailers - Rebase on v6.6-rc7 - Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240...@skole.hr Changes in v6: - Address maintainer comments: - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver - Drop GPIO patch as it's been pulled - Update trailers - Rebase on v6.6-rc5 - Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937e...@skole.hr Changes in v5: - Address maintainer comments: - Move *_NR_CLKS to clock driver from dt binding file - Allocate correct number of clocks for each block instead of blindly allocating 50 for each - Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b...@skole.hr Changes in v4: - Address maintainer comments: - Relicense clock binding file to BSD-2 - Add pinctrl-names to SD card node - Add vgic registers to GIC node - Rebase on v6.5-rc5 - Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37...@skole.hr Changes in v3: - Address maintainer comments: - Drop GPIO dynamic allocation patch - Move clock register offsets into driver (instead of bindings file) - Add missing Tested-by trailer to u32_fract patch - Move SoC binding to arm/mrvl/mrvl.yaml - Add serial0 alias and stdout-path to board dts to enable UART debugging - Rebase on v6.5-rc4 - Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihano...@skole.hr Changes in v2: - Remove earlycon patch as it's been merged into tty-next - Address maintainer comments: - Clarify GPIO regressions on older PXA platforms - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC - Add missing includes to clock driver - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK - Dual license clock bindings - Change clock IDs to decimal - Fix underscores in dt node names - Move chosen node to top of board dts - Clean up documentation - Reorder commits - Drop pxa,rev-id - Rename muic-i2c to i2c-muic - Reword some commits - Move framebuffer node to chosen - Add aliases for mmc nodes - Rebase on v6.5-rc3 - Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihano...@skole.hr --- Duje Mihanović (4): dt-bindings: marvell: Document PXA1908 SoC and samsung,coreprimevelte arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte MAINTAINERS: add myself as Marvell PXA1908 maintainer .../devicetree/bindings/arm/mrvl/mrvl.yaml | 5 + MAINTAINERS | 9 + arch/arm64/Kconfig.platforms | 8 + arch/arm64/boot/dts/marvell/Makefile | 3 + .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 336 +++++++++++++++++++++ arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 ++++++++++++++++++ 6 files changed, 661 insertions(+) --- base-commit: 5bc55a333a2f7316b58edc7573e8e893f7acb532 change-id: 20230803-pxa1908-lkml-6830e8da45c7 Best regards, -- Duje Mihanović <duje.mihano...@skole.hr>
