Hi! You don't need a partition if you are willing to donate the whole disk to sbd. What "sbd create" does is "kind of format" the block storage you specify. Be careful: Most programs don't recognize that "format" and may consider the disk to be empty.
Also make sure that /dev/sdd is the same device during reboots and across nodes... Regards, Ulrich >>> Fredrik Hudner <[email protected]> schrieb am 09.04.2013 um 16:52 in Nachricht <CAFtwCgN9Yq6rpWcZms_QuBKSmOsTN5bigFC_AV1GvP=tw4-...@mail.gmail.com>: > Oh, So I have to create a partion on the device first ? I thought *sbd -d > /dev/sdd create* did that > > > On Tue, Apr 9, 2013 at 4:32 PM, emmanuel segura <[email protected]> wrote: > > > Sorry > > > > create a partition on /dev/sdd and you use that > > > > > > 2013/4/9 emmanuel segura <[email protected]> > > > > > create a partition on /dev/sdd and you that > > > > > > > > > 2013/4/9 Fredrik Hudner <[email protected]> > > > > > >> Hi, > > >> > > >> I have a (for now) two node HA cluster with sbd as stonith mechanism. > > >> I have followed the installation and configuration of sbd from > > >> http://www.linux-ha.org/wiki/SBD_Fencing. > > >> For one reason or another stonith won't start and messages log says at > > one > > >> point: > > >> > > >> stonith-ng[20383]: notice: stonith_device_action: Device stonith_sbd > > not > > >> found. > > >> stonith-ng[30234]: info: stonith_command: Processed st_execute from > > >> lrmd: rc=-12 > > >> stonith-ng[30234]: info: stonith_device_register: Added > > 'stonith_sbd' > > >> to the device list (1 active devices) > > >> stonith-ng[30234]: info: stonith_command: Processed > > st_device_register > > >> from lrmd: rc=0 > > >> stonith-ng[30234]: info: stonith_command: Processed st_execute from > > >> lrmd: rc=-1 > > >> stonith-ng[30234]: notice: log_operation: Operation 'monitor' [30502] > > >> for > > >> device 'stonith_sbd' returned: -2 > > >> stonith-ng[30234]: info: stonith_device_remove: Removed > > 'stonith_sbd' > > >> from the device list (0 active devices) > > >> > > >> Maybe it doesn't find the sbd device /dev/sdd ? > > >> From the output of my logs, you can see that both machines see each > > others > > >> sbd device but stonith doesn't seem to recognize the device. Question is > > >> why > > >> > > >> Attached are all possible logs and config files from drbd, sbd, > > pacemaker. > > >> Corosync I can send if you need me too, but the post became to big with > > >> that included > > >> Kind regards > > >> /Fredrik > > >> > > >> _______________________________________________ > > >> Linux-HA mailing list > > >> [email protected] > > >> http://lists.linux-ha.org/mailman/listinfo/linux-ha > > >> See also: http://linux-ha.org/ReportingProblems > > >> > > > > > > > > > > > > -- > > > esta es mi vida e me la vivo hasta que dios quiera > > > > > > > > > > > -- > > esta es mi vida e me la vivo hasta que dios quiera > > _______________________________________________ > > Linux-HA mailing list > > [email protected] > > http://lists.linux-ha.org/mailman/listinfo/linux-ha > > See also: http://linux-ha.org/ReportingProblems > > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
