If i rember well, for use Ilo 3 card you sould use the cluster agent ipmilan
Il giorno 11 aprile 2012 23:00, Pham, Tom <[email protected]> ha scritto: > Hi everyone, > > I try to test a 2 nodes cluster with stonith resource using external/ipmi > ( I tried external/riloe first but it does not seem to work) > My system has HP Proliant BL460c G7 with iLO 3 card Firmware 1.15 > SUSE 11 > Corosync version 1.2.7 ; Pacmaker 1.0.9 > > When I use the interface lan or lanplus, It failed to start the stonith > resource. I get the error below > external/ipmi[12173]: [12184]: ERROR: error executing ipmitool: Error: > Unable to establish IPMI v2 / RMCP+ session Unable to get Chassis Power > Status > > However, when I used the interface = open instead lan/lanplus ,it started > the stonith resource fine. When I tried to kill -9 corosync in node1, I > expect it will reboot node1 and started all resource on node2. But it > reboot node1. Someone mentioned that open interface is a local interface > and only allows to fence itself. > > Anyone knows why the lan/lanplus does not work? > > Thanks > > Tom Pham > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > -- esta es mi vida e me la vivo hasta que dios quiera _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
