On Fri, Sep 16, 2011 at 11:22 PM, Guillaume Bettayeb <[email protected]> wrote: > Hi all, > > I have been through my Apache configuration again and I confirm Apache works > fine.
I assume you're testing by running "/etc/init.d/apache2 start" or something similar? This is not what the cluster executes to start apache and therefor the test doesn't help much. > > I have changed corosync config file to dump all the corosync log into > /var/log/corosync/corosync.log > > then I have restarted corosync and the log file has the following : > > http://pastebin.com/BFVVfxCh > > Could the following lines being the consequence of the error ? A consequence yes, but not the cause. > > root@node1:/var/log/corosync# cat corosync-apache.log | grep "INFINITY > times" > Sep 16 14:11:13 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node1 > Sep 16 14:11:15 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node1 > Sep 16 14:11:16 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node1 > Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node1 > Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node2 > Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node1 > Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has > failed INFINITY times on node2 > > > Thanks again, > > G > > On 16 September 2011 11:00, Guillaume Bettayeb <[email protected]>wrote: > >> Hi Dejan, >> >> I am not sure because Apache runs like a charm when not started via >> Corosync but I don't know. >> >> Thanks, >> >> Guillaume >> >> >> On 16 September 2011 09:01, Dejan Muhamedagic <[email protected]> wrote: >> >>> Hi, >>> >>> On Fri, Sep 16, 2011 at 03:01:12AM +0100, Guillaume Bettayeb wrote: >>> > Hi all, >>> > >>> > >>> > I am still struggling to run apache in corosync. My Apache service is OK >>> and >>> > runs fine if I start it manually, I have mod_status enabled on both >>> nodes >>> > OK. Ulrich made a good point earlier by asking if the cgisock ls -l >>> > /var/run/apache2 was used by another process but that's not the case. >>> > >>> > I've restarted corosync after midnight and have added the full syslog >>> here : >>> > >>> > http://pastebin.com/LXmLUu3W >>> > >>> > >>> > I keep digging on google to find out why is it not working but any help >>> > would be greatly appreciated..is anyone else runs an Ubuntu cluster with >>> > Apache here by any chance ? >>> >>> Perhaps, but since this seems to be an issue with apache on >>> Ubuntu I guess it's best to enquire in some ubuntu forum. >>> >>> Thanks, >>> >>> Dejan >>> >>> > Thanks, >>> > >>> > Guillaume >>> > >>> > >>> > On 15 September 2011 16:04, Guillaume Bettayeb <[email protected] >>> >wrote: >>> > >>> > > Hi Ulrich, >>> > > >>> > > nope, there's nothing in there at the moment : >>> > > root@node1:/home/user# ls -l /var/run/apache2 >>> > > ls: cannot access /var/run/apache2: No such file or directory >>> > > >>> > > >>> > > it looks like that error comes up when the cluster starts apache. >>> > > >>> > > >>> > > Guillaume >>> > > >>> > > On 15 September 2011 16:00, Ulrich Windl < >>> > > [email protected]> wrote: >>> > > >>> > >> Hi! >>> > >> >>> > >> What about "ls -l /var/run/apache2"? Any cgisock* there? Permissions >>> of >>> > >> the directory OK? Who is using that cgisock? >>> > >> >>> > >> Ulrich >>> > >> >>> > >> >>> > >> >>> Guillaume Bettayeb <[email protected]> schrieb am >>> 15.09.2011 um >>> > >> 16:06 in >>> > >> Nachricht >>> > >> <CAG6QY=3DLP6S1t=+jsq7qv+rmp5qqq02crnbea38nzbgvbd...@mail.gmail.com >>> >: >>> > >> > Hi all, >>> > >> > >>> > >> > Thanks for your advice, I have double checked mod_status in Apache >>> and >>> > >> its >>> > >> > definitely enabled on both nodes : >>> > >> > ls /etc/apache2/mods-enabled >>> > >> > alias.conf authz_user.load dir.conf >>> reqtimeout.conf >>> > >> > alias.load autoindex.conf dir.load >>> reqtimeout.load >>> > >> > auth_basic.load autoindex.load env.load >>> setenvif.conf >>> > >> > authn_file.load cgid.conf mime.conf >>> setenvif.load >>> > >> > authz_default.load cgid.load mime.load >>> status.conf >>> > >> > authz_groupfile.load deflate.conf negotiation.conf >>> status.load >>> > >> > authz_host.load deflate.load negotiation.load >>> > >> > >>> > >> > I have checked the status page http://node/server-status and I can >>> see >>> > >> the >>> > >> > status page ok. The mod_status is enabled on my node and runs fine. >>> > >> > >>> > >> > I had a look at my apache log as you advised but I can't see Apache >>> > >> moaning >>> > >> > about a specific error, apart from multiple stops and restarts due >>> to my >>> > >> > tests : >>> > >> > >>> > >> > [Thu Sep 15 14:20:37 2011] [notice] caught SIGTERM, shutting down >>> > >> > [Thu Sep 15 14:20:38 2011] [notice] Apache/2.2.17 (Ubuntu) >>> configured -- >>> > >> > resuming normal operations >>> > >> > [Thu Sep 15 14:20:38 2011] [error] (2)No such file or directory: >>> > >> Couldn't >>> > >> > bind unix domain socket /var/run/apache2/cgisock.4278 >>> > >> > [Thu Sep 15 14:20:39 2011] [notice] caught SIGTERM, shutting down >>> > >> > >>> > >> > That's for the primary node. It looks like Corosync shuts down >>> Apache. >>> > >> > On the Apache log file of the second node, I see the following : >>> > >> > >>> > >> > [Thu Sep 15 14:18:27 2011] [notice] Apache/2.2.17 (Ubuntu) >>> configured -- >>> > >> > resuming normal operations >>> > >> > [Thu Sep 15 14:18:27 2011] [error] (2)No such file or directory: >>> > >> Couldn't >>> > >> > bind unix domain socket /var/run/apache2/cgisock.1338 >>> > >> > [Thu Sep 15 14:18:28 2011] [crit] cgid daemon failed to initialize >>> > >> > >>> > >> > I still have errors but the http service keep on running, no >>> SIGTERM. >>> > >> > >>> > >> > And then my node status is : >>> > >> > >>> > >> > Online: [ node1 node2 ] >>> > >> > >>> > >> > Resource Group: group1 >>> > >> > failover-ip (ocf::heartbeat:IPaddr): Started node1 >>> > >> > apache (ocf::heartbeat:apache): Stopped >>> > >> > >>> > >> > Failed actions: >>> > >> > apache_start_0 (node=node2, call=6, rc=1, status=complete): >>> unknown >>> > >> > error >>> > >> > apache_monitor_0 (node=node1, call=3, rc=1, status=complete): >>> > >> unknown >>> > >> > error >>> > >> > apache_start_0 (node=node1, call=7, rc=1, status=complete): >>> unknown >>> > >> > error >>> > >> > >>> > >> > >>> > >> > of interest, some information found in var/log/syslog on node1 : >>> > >> > >>> > >> > Sep 15 02:32:56 node1 crmd: [710]: info: do_state_transition: All 2 >>> > >> cluster >>> > >> > nodes are eligible to run resources. >>> > >> > Sep 15 02:32:56 node1 apache[928]: INFO: apache not running >>> > >> > Sep 15 02:32:56 node1 apache[928]: INFO: waiting for apache >>> > >> > /etc/apache2/apache2.conf to come up >>> > >> > >>> > >> > Sep 15 02:32:58 node1 apache[928]: INFO: Killing apache PID 995 >>> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >>> > >> (apache:start:stderr) >>> > >> > kill: 833: >>> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >>> > >> (apache:start:stderr) No >>> > >> > such process >>> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >>> > >> (apache:start:stderr) >>> > >> > Sep 15 02:32:59 node1 apache[928]: INFO: Killing apache PID 995 >>> > >> > Sep 15 02:32:59 node1 apache[928]: INFO: apache stopped. >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: process_lrm_event: LRM >>> > >> operation >>> > >> > apache_start_0 (call=6, rc=1, cib-update=37, confirmed=true) >>> unknown >>> > >> error >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: WARN: status_from_rc: Action 8 >>> > >> > (apache_start_0) on node1 failed (target: 0 vs. rc: 1): Error >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: WARN: update_failcount: Updating >>> > >> > failcount for apache on node1 after failed start: rc=1 >>> (update=INFINITY, >>> > >> > time=1316050379) >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: abort_transition_graph: >>> > >> > match_graph_event:272 - Triggered transition abort (complete=0, >>> > >> > tag=lrm_rsc_op, id=apache_start_0, >>> > >> > magic=0:1;8:3:0:a4e41810-3e8f-439a-9b92-489edf657291, cib=0.172.10) >>> : >>> > >> Event >>> > >> > failed >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: update_abort_priority: >>> Abort >>> > >> > priority upgraded from 0 to 1 >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: update_abort_priority: >>> Abort >>> > >> action >>> > >> > done superceeded by restart >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: match_graph_event: Action >>> > >> > apache_start_0 (8) confirmed on node1 (rc=4) >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: run_graph: >>> > >> > ==================================================== >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: notice: run_graph: Transition 3 >>> > >> > (Complete=3, Pending=0, Fired=0, Skipped=4, Incomplete=0, >>> > >> > Source=/var/lib/pengine/pe-input-247.bz2): Stopped >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: te_graph_trigger: >>> Transition 3 >>> > >> is >>> > >> > now complete >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: do_state_transition: State >>> > >> > transition S_TRANSITION_ENGINE -> S_POLICY_ENGINE [ input=I_PE_CALC >>> > >> > cause=C_FSA_INTERNAL origin=notify_crmd ] >>> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: do_state_transition: All 2 >>> > >> cluster >>> > >> > nodes are eligible to run resources. >>> > >> > >>> > >> > >>> > >> > >>> > >> > >>> > >> > Here is my crm configure show, is there anything I can change there >>> ? >>> > >> > >>> > >> > >>> > >> > root@node1:/home/user# crm configure show >>> > >> > node node1 \ >>> > >> > attributes standby="off" >>> > >> > node node2 \ >>> > >> > attributes standby="off" >>> > >> > primitive apache ocf:heartbeat:apache \ >>> > >> > params configfile="/etc/apache2/apache2.conf" >>> httpd="/usr/sbin/apache2" >>> > >> \ >>> > >> > op start interval="10" timeout="40s" \ >>> > >> > op stop interval="10" timeout="60s" \ >>> > >> > op monitor interval="5s" >>> > >> > primitive failover-ip ocf:heartbeat:IPaddr \ >>> > >> > params ip="192.168.0.105" \ >>> > >> > op monitor interval="5s" >>> > >> > group group1 failover-ip apache >>> > >> > location cli-prefer-failover-ip failover-ip \ >>> > >> > rule $id="cli-prefer-rule-failover-ip" inf: #uname eq node1 >>> > >> > property $id="cib-bootstrap-options" \ >>> > >> > dc-version="1.0.9-da7075976b5ff0bee71074385f8fd02f296ec8a3" \ >>> > >> > cluster-infrastructure="openais" \ >>> > >> > expected-quorum-votes="2" \ >>> > >> > stonith-enabled="false" \ >>> > >> > no-quorum-policy="ignore" >>> > >> > >>> > >> > >>> > >> > Thank you for your help, >>> > >> > >>> > >> > Guillaume >>> > >> > >>> > >> > >>> > >> > On 13 September 2011 08:29, Tim Serong <[email protected]> wrote: >>> > >> > >>> > >> > > On 13/09/11 00:39, Guillaume Bettayeb wrote: >>> > >> > > > Hi there, >>> > >> > > > >>> > >> > > > This is my first post on this list, so hello everybody :) >>> > >> > > > >>> > >> > > > I am currently testing the fun of Linux HA Clustering (just for >>> > >> > > > personal interest) >>> > >> > > > and I have successfully set up a tiny ubuntu virtualbox 2 nodes >>> > >> > > > cluster with Ip failover and Apache running as resources. >>> > >> > > > >>> > >> > > > Right after the install, I tried to move the resources from a >>> node >>> > >> to >>> > >> > > > the other (command standby) an everything worked like a charm. >>> > >> > > > Then I tried some failure tests, and started with a simple >>> > >> > > > /etc/init.d/networking stop on one node, noticed that the other >>> node >>> > >> > > > took ownership of the resources automatically, all was fine. >>> > >> > > > >>> > >> > > > Then I have rebooted the nodes just to see how they would >>> restart >>> > >> the >>> > >> > > > cluster, and since I have the following error : >>> > >> > > > >>> > >> > > > apache_start_0 (node=node1, call=8, rc=1, status=complete): >>> unknown >>> > >> error >>> > >> > > > >>> > >> > > > For reading convenience, my outputs are available at >>> > >> > > > http://pastebin.com/w1J4TWaG >>> > >> > > > Just to clarify, that's : >>> > >> > > > - crm configure show command >>> > >> > > > - crm_mon status >>> > >> > > > - All relevant information into my /var/log/syslog (although I >>> was >>> > >> not >>> > >> > > > sure what to look at, I never used corosync before) >>> > >> > > > >>> > >> > > > I have read on an older post that the apache error usually have >>> > >> > > > something to do with either timeout or mod status. >>> > >> > > > As you can see on my pastebin, my timeout values are ok : >>> > >> > > > op stop interval="60s" timeout="120" \ >>> > >> > > > op start interval="60s" timeout="120" \ >>> > >> > > > >>> > >> > > > as for mod_status it's already enabled in Apache : >>> > >> > > > root@node1:/etc/apache2# a2enmod status >>> > >> > > > Module status already enabled >>> > >> > > > >>> > >> > > > Have I done anything wrong or is there anything else I should >>> > >> > > check/configure ? >>> > >> > > > >>> > >> > > > Any help with this matter would be greatly appreciated :) >>> > >> > > >>> > >> > > On a punt, it's probably mod_status. Check your Apache logs at >>> the >>> > >> time >>> > >> > > the start failed. If it's whining about a 403 or 404 for >>> > >> /server-status >>> > >> > > (or similar), you need to fix that in your Apache config. >>> > >> > > >>> > >> > > HTH, >>> > >> > > >>> > >> > > Tim >>> > >> > > -- >>> > >> > > Tim Serong >>> > >> > > Senior Clustering Engineer >>> > >> > > SUSE >>> > >> > > [email protected] >>> > >> > > _______________________________________________ >>> > >> > > Linux-HA mailing list >>> > >> > > [email protected] >>> > >> > > http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> > >> > > See also: http://linux-ha.org/ReportingProblems >>> > >> > > >>> > >> > _______________________________________________ >>> > >> > Linux-HA mailing list >>> > >> > [email protected] >>> > >> > http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> > >> > See also: http://linux-ha.org/ReportingProblems >>> > >> > >>> > >> >>> > >> >>> > >> >>> > >> _______________________________________________ >>> > >> Linux-HA mailing list >>> > >> [email protected] >>> > >> http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> > >> See also: http://linux-ha.org/ReportingProblems >>> > >> >>> > > >>> > > >>> > _______________________________________________ >>> > Linux-HA mailing list >>> > [email protected] >>> > http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> > See also: http://linux-ha.org/ReportingProblems >>> _______________________________________________ >>> Linux-HA mailing list >>> [email protected] >>> http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> See also: http://linux-ha.org/ReportingProblems >>> >> >> > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
