Hi all, I have been through my Apache configuration again and I confirm Apache works fine.
I have changed corosync config file to dump all the corosync log into /var/log/corosync/corosync.log then I have restarted corosync and the log file has the following : http://pastebin.com/BFVVfxCh Could the following lines being the consequence of the error ? root@node1:/var/log/corosync# cat corosync-apache.log | grep "INFINITY times" Sep 16 14:11:13 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node1 Sep 16 14:11:15 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node1 Sep 16 14:11:16 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node1 Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node1 Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node2 Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node1 Sep 16 14:11:18 node1 pengine: [7103]: info: get_failcount: apache has failed INFINITY times on node2 Thanks again, G On 16 September 2011 11:00, Guillaume Bettayeb <[email protected]>wrote: > Hi Dejan, > > I am not sure because Apache runs like a charm when not started via > Corosync but I don't know. > > Thanks, > > Guillaume > > > On 16 September 2011 09:01, Dejan Muhamedagic <[email protected]> wrote: > >> Hi, >> >> On Fri, Sep 16, 2011 at 03:01:12AM +0100, Guillaume Bettayeb wrote: >> > Hi all, >> > >> > >> > I am still struggling to run apache in corosync. My Apache service is OK >> and >> > runs fine if I start it manually, I have mod_status enabled on both >> nodes >> > OK. Ulrich made a good point earlier by asking if the cgisock ls -l >> > /var/run/apache2 was used by another process but that's not the case. >> > >> > I've restarted corosync after midnight and have added the full syslog >> here : >> > >> > http://pastebin.com/LXmLUu3W >> > >> > >> > I keep digging on google to find out why is it not working but any help >> > would be greatly appreciated..is anyone else runs an Ubuntu cluster with >> > Apache here by any chance ? >> >> Perhaps, but since this seems to be an issue with apache on >> Ubuntu I guess it's best to enquire in some ubuntu forum. >> >> Thanks, >> >> Dejan >> >> > Thanks, >> > >> > Guillaume >> > >> > >> > On 15 September 2011 16:04, Guillaume Bettayeb <[email protected] >> >wrote: >> > >> > > Hi Ulrich, >> > > >> > > nope, there's nothing in there at the moment : >> > > root@node1:/home/user# ls -l /var/run/apache2 >> > > ls: cannot access /var/run/apache2: No such file or directory >> > > >> > > >> > > it looks like that error comes up when the cluster starts apache. >> > > >> > > >> > > Guillaume >> > > >> > > On 15 September 2011 16:00, Ulrich Windl < >> > > [email protected]> wrote: >> > > >> > >> Hi! >> > >> >> > >> What about "ls -l /var/run/apache2"? Any cgisock* there? Permissions >> of >> > >> the directory OK? Who is using that cgisock? >> > >> >> > >> Ulrich >> > >> >> > >> >> > >> >>> Guillaume Bettayeb <[email protected]> schrieb am >> 15.09.2011 um >> > >> 16:06 in >> > >> Nachricht >> > >> <CAG6QY=3DLP6S1t=+jsq7qv+rmp5qqq02crnbea38nzbgvbd...@mail.gmail.com >> >: >> > >> > Hi all, >> > >> > >> > >> > Thanks for your advice, I have double checked mod_status in Apache >> and >> > >> its >> > >> > definitely enabled on both nodes : >> > >> > ls /etc/apache2/mods-enabled >> > >> > alias.conf authz_user.load dir.conf >> reqtimeout.conf >> > >> > alias.load autoindex.conf dir.load >> reqtimeout.load >> > >> > auth_basic.load autoindex.load env.load >> setenvif.conf >> > >> > authn_file.load cgid.conf mime.conf >> setenvif.load >> > >> > authz_default.load cgid.load mime.load >> status.conf >> > >> > authz_groupfile.load deflate.conf negotiation.conf >> status.load >> > >> > authz_host.load deflate.load negotiation.load >> > >> > >> > >> > I have checked the status page http://node/server-status and I can >> see >> > >> the >> > >> > status page ok. The mod_status is enabled on my node and runs fine. >> > >> > >> > >> > I had a look at my apache log as you advised but I can't see Apache >> > >> moaning >> > >> > about a specific error, apart from multiple stops and restarts due >> to my >> > >> > tests : >> > >> > >> > >> > [Thu Sep 15 14:20:37 2011] [notice] caught SIGTERM, shutting down >> > >> > [Thu Sep 15 14:20:38 2011] [notice] Apache/2.2.17 (Ubuntu) >> configured -- >> > >> > resuming normal operations >> > >> > [Thu Sep 15 14:20:38 2011] [error] (2)No such file or directory: >> > >> Couldn't >> > >> > bind unix domain socket /var/run/apache2/cgisock.4278 >> > >> > [Thu Sep 15 14:20:39 2011] [notice] caught SIGTERM, shutting down >> > >> > >> > >> > That's for the primary node. It looks like Corosync shuts down >> Apache. >> > >> > On the Apache log file of the second node, I see the following : >> > >> > >> > >> > [Thu Sep 15 14:18:27 2011] [notice] Apache/2.2.17 (Ubuntu) >> configured -- >> > >> > resuming normal operations >> > >> > [Thu Sep 15 14:18:27 2011] [error] (2)No such file or directory: >> > >> Couldn't >> > >> > bind unix domain socket /var/run/apache2/cgisock.1338 >> > >> > [Thu Sep 15 14:18:28 2011] [crit] cgid daemon failed to initialize >> > >> > >> > >> > I still have errors but the http service keep on running, no >> SIGTERM. >> > >> > >> > >> > And then my node status is : >> > >> > >> > >> > Online: [ node1 node2 ] >> > >> > >> > >> > Resource Group: group1 >> > >> > failover-ip (ocf::heartbeat:IPaddr): Started node1 >> > >> > apache (ocf::heartbeat:apache): Stopped >> > >> > >> > >> > Failed actions: >> > >> > apache_start_0 (node=node2, call=6, rc=1, status=complete): >> unknown >> > >> > error >> > >> > apache_monitor_0 (node=node1, call=3, rc=1, status=complete): >> > >> unknown >> > >> > error >> > >> > apache_start_0 (node=node1, call=7, rc=1, status=complete): >> unknown >> > >> > error >> > >> > >> > >> > >> > >> > of interest, some information found in var/log/syslog on node1 : >> > >> > >> > >> > Sep 15 02:32:56 node1 crmd: [710]: info: do_state_transition: All 2 >> > >> cluster >> > >> > nodes are eligible to run resources. >> > >> > Sep 15 02:32:56 node1 apache[928]: INFO: apache not running >> > >> > Sep 15 02:32:56 node1 apache[928]: INFO: waiting for apache >> > >> > /etc/apache2/apache2.conf to come up >> > >> > >> > >> > Sep 15 02:32:58 node1 apache[928]: INFO: Killing apache PID 995 >> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >> > >> (apache:start:stderr) >> > >> > kill: 833: >> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >> > >> (apache:start:stderr) No >> > >> > such process >> > >> > Sep 15 02:32:59 node1 lrmd: [707]: info: RA output: >> > >> (apache:start:stderr) >> > >> > Sep 15 02:32:59 node1 apache[928]: INFO: Killing apache PID 995 >> > >> > Sep 15 02:32:59 node1 apache[928]: INFO: apache stopped. >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: process_lrm_event: LRM >> > >> operation >> > >> > apache_start_0 (call=6, rc=1, cib-update=37, confirmed=true) >> unknown >> > >> error >> > >> > Sep 15 02:32:59 node1 crmd: [710]: WARN: status_from_rc: Action 8 >> > >> > (apache_start_0) on node1 failed (target: 0 vs. rc: 1): Error >> > >> > Sep 15 02:32:59 node1 crmd: [710]: WARN: update_failcount: Updating >> > >> > failcount for apache on node1 after failed start: rc=1 >> (update=INFINITY, >> > >> > time=1316050379) >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: abort_transition_graph: >> > >> > match_graph_event:272 - Triggered transition abort (complete=0, >> > >> > tag=lrm_rsc_op, id=apache_start_0, >> > >> > magic=0:1;8:3:0:a4e41810-3e8f-439a-9b92-489edf657291, cib=0.172.10) >> : >> > >> Event >> > >> > failed >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: update_abort_priority: >> Abort >> > >> > priority upgraded from 0 to 1 >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: update_abort_priority: >> Abort >> > >> action >> > >> > done superceeded by restart >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: match_graph_event: Action >> > >> > apache_start_0 (8) confirmed on node1 (rc=4) >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: run_graph: >> > >> > ==================================================== >> > >> > Sep 15 02:32:59 node1 crmd: [710]: notice: run_graph: Transition 3 >> > >> > (Complete=3, Pending=0, Fired=0, Skipped=4, Incomplete=0, >> > >> > Source=/var/lib/pengine/pe-input-247.bz2): Stopped >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: te_graph_trigger: >> Transition 3 >> > >> is >> > >> > now complete >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: do_state_transition: State >> > >> > transition S_TRANSITION_ENGINE -> S_POLICY_ENGINE [ input=I_PE_CALC >> > >> > cause=C_FSA_INTERNAL origin=notify_crmd ] >> > >> > Sep 15 02:32:59 node1 crmd: [710]: info: do_state_transition: All 2 >> > >> cluster >> > >> > nodes are eligible to run resources. >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > Here is my crm configure show, is there anything I can change there >> ? >> > >> > >> > >> > >> > >> > root@node1:/home/user# crm configure show >> > >> > node node1 \ >> > >> > attributes standby="off" >> > >> > node node2 \ >> > >> > attributes standby="off" >> > >> > primitive apache ocf:heartbeat:apache \ >> > >> > params configfile="/etc/apache2/apache2.conf" >> httpd="/usr/sbin/apache2" >> > >> \ >> > >> > op start interval="10" timeout="40s" \ >> > >> > op stop interval="10" timeout="60s" \ >> > >> > op monitor interval="5s" >> > >> > primitive failover-ip ocf:heartbeat:IPaddr \ >> > >> > params ip="192.168.0.105" \ >> > >> > op monitor interval="5s" >> > >> > group group1 failover-ip apache >> > >> > location cli-prefer-failover-ip failover-ip \ >> > >> > rule $id="cli-prefer-rule-failover-ip" inf: #uname eq node1 >> > >> > property $id="cib-bootstrap-options" \ >> > >> > dc-version="1.0.9-da7075976b5ff0bee71074385f8fd02f296ec8a3" \ >> > >> > cluster-infrastructure="openais" \ >> > >> > expected-quorum-votes="2" \ >> > >> > stonith-enabled="false" \ >> > >> > no-quorum-policy="ignore" >> > >> > >> > >> > >> > >> > Thank you for your help, >> > >> > >> > >> > Guillaume >> > >> > >> > >> > >> > >> > On 13 September 2011 08:29, Tim Serong <[email protected]> wrote: >> > >> > >> > >> > > On 13/09/11 00:39, Guillaume Bettayeb wrote: >> > >> > > > Hi there, >> > >> > > > >> > >> > > > This is my first post on this list, so hello everybody :) >> > >> > > > >> > >> > > > I am currently testing the fun of Linux HA Clustering (just for >> > >> > > > personal interest) >> > >> > > > and I have successfully set up a tiny ubuntu virtualbox 2 nodes >> > >> > > > cluster with Ip failover and Apache running as resources. >> > >> > > > >> > >> > > > Right after the install, I tried to move the resources from a >> node >> > >> to >> > >> > > > the other (command standby) an everything worked like a charm. >> > >> > > > Then I tried some failure tests, and started with a simple >> > >> > > > /etc/init.d/networking stop on one node, noticed that the other >> node >> > >> > > > took ownership of the resources automatically, all was fine. >> > >> > > > >> > >> > > > Then I have rebooted the nodes just to see how they would >> restart >> > >> the >> > >> > > > cluster, and since I have the following error : >> > >> > > > >> > >> > > > apache_start_0 (node=node1, call=8, rc=1, status=complete): >> unknown >> > >> error >> > >> > > > >> > >> > > > For reading convenience, my outputs are available at >> > >> > > > http://pastebin.com/w1J4TWaG >> > >> > > > Just to clarify, that's : >> > >> > > > - crm configure show command >> > >> > > > - crm_mon status >> > >> > > > - All relevant information into my /var/log/syslog (although I >> was >> > >> not >> > >> > > > sure what to look at, I never used corosync before) >> > >> > > > >> > >> > > > I have read on an older post that the apache error usually have >> > >> > > > something to do with either timeout or mod status. >> > >> > > > As you can see on my pastebin, my timeout values are ok : >> > >> > > > op stop interval="60s" timeout="120" \ >> > >> > > > op start interval="60s" timeout="120" \ >> > >> > > > >> > >> > > > as for mod_status it's already enabled in Apache : >> > >> > > > root@node1:/etc/apache2# a2enmod status >> > >> > > > Module status already enabled >> > >> > > > >> > >> > > > Have I done anything wrong or is there anything else I should >> > >> > > check/configure ? >> > >> > > > >> > >> > > > Any help with this matter would be greatly appreciated :) >> > >> > > >> > >> > > On a punt, it's probably mod_status. Check your Apache logs at >> the >> > >> time >> > >> > > the start failed. If it's whining about a 403 or 404 for >> > >> /server-status >> > >> > > (or similar), you need to fix that in your Apache config. >> > >> > > >> > >> > > HTH, >> > >> > > >> > >> > > Tim >> > >> > > -- >> > >> > > Tim Serong >> > >> > > Senior Clustering Engineer >> > >> > > SUSE >> > >> > > [email protected] >> > >> > > _______________________________________________ >> > >> > > Linux-HA mailing list >> > >> > > [email protected] >> > >> > > http://lists.linux-ha.org/mailman/listinfo/linux-ha >> > >> > > See also: http://linux-ha.org/ReportingProblems >> > >> > > >> > >> > _______________________________________________ >> > >> > Linux-HA mailing list >> > >> > [email protected] >> > >> > http://lists.linux-ha.org/mailman/listinfo/linux-ha >> > >> > See also: http://linux-ha.org/ReportingProblems >> > >> > >> > >> >> > >> >> > >> >> > >> _______________________________________________ >> > >> Linux-HA mailing list >> > >> [email protected] >> > >> http://lists.linux-ha.org/mailman/listinfo/linux-ha >> > >> See also: http://linux-ha.org/ReportingProblems >> > >> >> > > >> > > >> > _______________________________________________ >> > Linux-HA mailing list >> > [email protected] >> > http://lists.linux-ha.org/mailman/listinfo/linux-ha >> > See also: http://linux-ha.org/ReportingProblems >> _______________________________________________ >> Linux-HA mailing list >> [email protected] >> http://lists.linux-ha.org/mailman/listinfo/linux-ha >> See also: http://linux-ha.org/ReportingProblems >> > > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
