Hallo Thomas,
wie gewünscht übersende ich die die beiden Logdateien.
Ich habe die Konfiguration bis zur Aktualisierung auf Jessie unter
Wheezy so genutzt.
Vielen Dank für deine Hilfe
Peter
-------------------------------------------------
Fully Automatic Installation - FAI
4.3.2 (c) 1999-2015
Thomas Lange <la...@informatik.uni-koeln.de>
-------------------------------------------------
Calling task_confdir
Kernel currently running: Linux 3.2.0-4-amd64 x86_64 GNU/Linux
Kernel parameters: initrd=initrd.img ip=dhcp root=/dev/nfs nfsroot=192.168.178.30:/opt/regenmann/fai/nfsroot aufs boot=live FAI_CONFIG_SRC=nfs://192.168.178.30/opt/regenmann/fai/config FAI_FLAGS=verbose,sshd,createvt FAI_ACTION=install BOOT_IMAGE=vmlinuz
Reading /tmp/fai/boot.log
FAI_FLAGS: verbose sshd createvt
Setting SERVER=192.168.178.30. Value extracted from FAI_CONFIG_SRC.
Can't connect to monserver on 192.168.178.30 port 4711. Monitoring disabled.
FAI_CONFIG_SRC is set to nfs://192.168.178.30/opt/regenmann/fai/config
Configuration space 192.168.178.30:/opt/regenmann/fai/config mounted to /var/lib/fai/config
Calling task_setup
FAI_FLAGS: verbose sshd createvt
4 May 14:44:34 ntpdate[583]: step time server 192.168.178.1 offset 5.009757 sec
Press ctrl-c to interrupt FAI and to get a shell
Starting FAI execution - 20150504_144435
Calling task_defclass
fai-class: Defining classes.
Executing /var/lib/fai/config/class/10-base-classes.
10-base-classes OK.
Executing /var/lib/fai/config/class/20-hwdetect.source.
loading kernel module sd_mod
loading kernel module sr_mod
loading kernel module mptspi
loading kernel module dm-mod
loading kernel module md-mod
loading kernel module aes
loading kernel module dm-crypt
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 08:00:27:86:70:a1 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.49/24 brd 192.168.178.255 scope global eth0
inet6 fe80::a00:27ff:fe86:70a1/64 scope link
20-hwdetect.source OK.
Executing /var/lib/fai/config/class/50-host-classes.
50-host-classes OK.
List of all classes: DEFAULT LINUX AMD64 BASIS DEBDEU PC_NGDIENSTE PC_NGWERKZEUGE PC_DESKTOP PC_SYSTEM PC_KOMMUNIKATION PC_OFFICE PC_MULTIMEDIA PC_ENTWICKLUNG PC_WERKZEUGE GRUB_PC (none) LAST
Calling task_defvar
Executing BASIS.var
++ FAI_ALLOW_UNSIGNED=1
++ UTC=yes
++ TIMEZONE=Europe/Berlin
++ ROOTPW='$1$kBnWcO.E$djxB128U7dMkrltJHPf6d1'
++ KEYMAP=us-latin1
++ STOP_ON_ERROR=700
Executing DEBDEU.var
++ CONSOLEFONT=
++ KEYMAP=de-latin1-nodeadkeys
++ MODULESLIST='usbkbd ehci-hcd ohci-hcd uhci-hcd usbhid psmouse'
Defining variables from additional.var
Loading keymap(s) de-latin1-nodeadkeys ...done.
Calling task_action
FAI_ACTION: install
Performing FAI installation. All data may be overwritten!
Calling task_install
Calling task_partition
Starting setup-storage 1.7
Using config file: /var/lib/fai/config/disk_config/BASIS
DEGRADED MODE. Incomplete RAID LVs will be processed.
Creating directory "/run/lock/lvm"
Finding all volume groups
No volume groups found
Executing: wipefs -a /dev/sda1
Executing: wipefs -a /dev/sda5
Executing: parted -s /dev/sda mklabel msdos
Executing: parted -s /dev/sda mkpart primary "ext3" 1048576B 525336575B
Executing: parted -s /dev/sda set 1 boot on
Executing: parted -s /dev/sda mkpart extended "" 525336576B 17179869183B
Executing: parted -s /dev/sda mkpart logical "linux-swap" 525337600B 2672821247B
Command had non-zero exit code
Error in task partition. Code: 710
Traceback: task_error task_partition task task_install task task_action task main
Source hook: savelog.LAST.source
ERRORS found in log files. See /tmp/fai/error.log
savelog.LAST.source OK.
$LOGUSER is undefined. Not saving log files to remote.
FATAL ERROR. Installation stopped.
root@(none):/tmp/fai# ifconig
bash: ifconig: command not found
root@(none):/tmp/fai# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:86:70:a1
inet addr:192.168.178.49 Bcast:192.168.178.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe86:70a1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25189 errors:0 dropped:0 overruns:0 frame:0
TX packets:14250 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34510074 (32.9 MiB) TX bytes:1296200 (1.2 MiB)
Interrupt:19 Base address:0xd020
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@(none):/tmp/fai# ifcon perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "de_DE.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Starting setup-storage 1.7
disklist: sda
Using config file: /var/lib/fai/config/disk_config/BASIS
Input was:
# example of new config file for setup-storage
#
# <type> <mountpoint> <size> <fs type> <mount options> <misc options>
disk_config disk1 disklabel:msdos bootable:1 fstabkey:uuid
primary /boot 500 ext3 rw
logical swap 2G swap sw
logical /var/log 4G ext4 rw,noatime,nodev
logical / 8G- ext4 rw,noatime,errors=remount-ro
(CMD) parted -s /dev/sda unit TiB print 1> /tmp/rGc9D0Qp5b 2> /tmp/pmgIvLP_7T
Executing: parted -s /dev/sda unit TiB print
(STDOUT) Model: ATA VBOX HARDDISK (scsi)
(STDOUT) Disk /dev/sda: 0.02TiB
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) Partition Table: msdos
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End Size Type File system Flags
(STDOUT) 1 0.00TiB 0.00TiB 0.00TiB primary boot
(STDOUT) 2 0.00TiB 0.02TiB 0.02TiB extended lba
(STDOUT) 5 0.00TiB 0.00TiB 0.00TiB logical
(STDOUT)
(CMD) parted -s /dev/sda unit B print free 1> /tmp/i0BlCs_OxF 2> /tmp/dCnSmUplCg
Executing: parted -s /dev/sda unit B print free
(STDOUT) Model: ATA VBOX HARDDISK (scsi)
(STDOUT) Disk /dev/sda: 17179869184B
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) Partition Table: msdos
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End Size Type File system Flags
(STDOUT) 32256B 1048575B 1016320B Free Space
(STDOUT) 1 1048576B 525336575B 524288000B primary boot
(STDOUT) 2 525336576B 17179869183B 16654532608B extended lba
(STDOUT) 5 525337600B 2672821247B 2147483648B logical
(STDOUT) 2672821248B 17179869183B 14507047936B Free Space
(STDOUT)
(CMD) parted -s /dev/sda unit chs print free 1> /tmp/tapkUYB8W5 2> /tmp/BbuKdfF8Pn
Executing: parted -s /dev/sda unit chs print free
(STDOUT) Model: ATA VBOX HARDDISK (scsi)
(STDOUT) Disk /dev/sda: 2088,170,1
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) BIOS cylinder,head,sector geometry: 2088,255,63. Each cylinder is 8225kB.
(STDOUT) Partition Table: msdos
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End Type File system Flags
(STDOUT) 0,1,0 0,32,31 Free Space
(STDOUT) 1 0,32,32 63,221,29 primary boot
(STDOUT) 2 63,221,30 2088,170,1 extended lba
(STDOUT) 5 63,221,32 324,242,47 logical
(STDOUT) 324,242,48 2088,170,1 Free Space
(STDOUT)
DEGRADED MODE. Incomplete RAID LVs will be processed.
Finding all volume groups
No volume groups found
(CMD) mdadm --examine --scan --verbose -c partitions 1> /tmp/6HkpktGVt_ 2> /tmp/Czj8hNjqPK
Executing: mdadm --examine --scan --verbose -c partitions
Current disk layout
$VAR1 = {
'/dev/sda' => {
'size' => '17179869184',
'bios_sectors_per_track' => '63',
'partitions' => {
'5' => {
'flags' => '',
'begin_byte' => '525337600',
'filesystem' => '',
'end_byte' => '2672821247',
'is_extended' => 0,
'count_byte' => '2147483648'
},
'2' => {
'flags' => 'lba',
'begin_byte' => '525336576',
'end_byte' => '17179869183',
'filesystem' => '',
'is_extended' => 1,
'count_byte' => '16654532608'
},
'1' => {
'is_extended' => 0,
'count_byte' => '524288000',
'flags' => 'boot',
'filesystem' => '',
'end_byte' => '525336575',
'begin_byte' => '1048576'
}
},
'sector_size' => '512',
'begin_byte' => 0,
'end_byte' => '17179869183',
'disklabel' => 'msdos',
'bios_heads' => '255',
'bios_cylinders' => '2088'
}
};
Current LVM layout
$VAR1 = {};
Current RAID layout
$VAR1 = {};
Current device tree
$VAR1 = {
'/dev/sda' => [
'/dev/sda1',
'/dev/sda2',
'/dev/sda5'
]
};
Desired disk layout
$VAR1 = {
'PHY_/dev/sda' => {
'preserveparts' => 0,
'bootable' => '1',
'fstabkey' => 'uuid',
'disklabel' => 'msdos',
'virtual' => 0,
'partitions' => {
'7' => {
'mountpoint' => '/',
'journal_dev' => undef,
'start_byte' => 6967790592,
'encrypt' => 0,
'size' => {
'extended' => 0,
'resize' => 0,
'eff_size' => '10212078592',
'preserve' => 0,
'always_format' => 0,
'range' => '10212078592-10212078592'
},
'filesystem' => 'ext4',
'end_byte' => '17179869183',
'mount_options' => 'rw,noatime,errors=remount-ro'
},
'1' => {
'size' => {
'eff_size' => 524288000,
'resize' => 0,
'extended' => 0,
'range' => '524288000-524288000',
'always_format' => 0,
'preserve' => 0
},
'encrypt' => 0,
'filesystem' => 'ext3',
'end_byte' => 525336575,
'mount_options' => 'rw',
'start_byte' => 1048576,
'mountpoint' => '/boot',
'journal_dev' => undef
},
'5' => {
'encrypt' => 0,
'size' => {
'extended' => 0,
'resize' => 0,
'eff_size' => 2147483648,
'always_format' => 0,
'preserve' => 0,
'range' => '2147483648-2147483648'
},
'mountpoint' => 'none',
'start_byte' => 525337600,
'mount_options' => 'sw',
'end_byte' => 2672821247,
'filesystem' => 'swap'
},
'2' => {
'end_byte' => '17179869183',
'start_byte' => 525336576,
'size' => {
'eff_size' => '16654532608',
'resize' => 0,
'extended' => 1,
'preserve' => 0,
'always_format' => 0
}
},
'6' => {
'start_byte' => 2672822272,
'mountpoint' => '/var/log',
'journal_dev' => undef,
'end_byte' => 6967789567,
'filesystem' => 'ext4',
'mount_options' => 'rw,noatime,nodev',
'size' => {
'extended' => 0,
'resize' => 0,
'eff_size' => 4294967296,
'preserve' => 0,
'always_format' => 0,
'range' => '4294967296-4294967296'
},
'encrypt' => 0
}
},
'opts_all' => {}
}
};
Desired device tree
$VAR1 = {
'/dev/sda' => [
'/dev/sda1',
'/dev/sda2',
'/dev/sda5',
'/dev/sda6',
'/dev/sda7'
]
};
Trying to add CMD: true
PRE:
POST: exist_/dev/sda
Trying to add CMD: wipefs -a /dev/sda1
PRE: exist_/dev/sda
POST: wipefs_/dev/sda1
Trying to add CMD: true
PRE: exist_/dev/sda,wipefs_/dev/sda1
POST: wipefs_/dev/sda2
Trying to add CMD: wipefs -a /dev/sda5
PRE: exist_/dev/sda,wipefs_/dev/sda1,wipefs_/dev/sda2
POST: wipefs_/dev/sda5
Trying to add CMD: true
PRE: exist_/dev/sda,wipefs_/dev/sda1,wipefs_/dev/sda2,wipefs_/dev/sda5
POST: cleared1_/dev/sda
Trying to add CMD: parted -s /dev/sda mklabel msdos
PRE: cleared1_/dev/sda
POST: cleared2_/dev/sda
Trying to add CMD: parted -s /dev/sda mkpart primary "ext3" 1048576B 525336575B
PRE: cleared2_/dev/sda
POST: prep2_/dev/sda1
Trying to add CMD: true
PRE: prep2_/dev/sda1
POST: exist_/dev/sda1
Trying to add CMD: parted -s /dev/sda set 1 boot on
PRE: exist_/dev/sda1,cleared2_/dev/sda
POST: flag_boot_/dev/sda1
Trying to add CMD: parted -s /dev/sda mkpart extended "" 525336576B 17179869183B
PRE: cleared2_/dev/sda,exist_/dev/sda1
POST: prep2_/dev/sda2
Trying to add CMD: true
PRE: prep2_/dev/sda2
POST: exist_/dev/sda2
Trying to add CMD: parted -s /dev/sda mkpart logical "linux-swap" 525337600B 2672821247B
PRE: cleared2_/dev/sda,exist_/dev/sda2
POST: prep2_/dev/sda5
Trying to add CMD: true
PRE: prep2_/dev/sda5
POST: exist_/dev/sda5
Trying to add CMD: parted -s /dev/sda mkpart logical "ext3" 2672822272B 6967789567B
PRE: cleared2_/dev/sda,exist_/dev/sda5
POST: prep2_/dev/sda6
Trying to add CMD: true
PRE: prep2_/dev/sda6
POST: exist_/dev/sda6
Trying to add CMD: parted -s /dev/sda mkpart logical "ext3" 6967790592B 17179869183B
PRE: cleared2_/dev/sda,exist_/dev/sda6
POST: prep2_/dev/sda7
Trying to add CMD: true
PRE: prep2_/dev/sda7
POST: exist_/dev/sda7
Trying to add CMD: mkfs.ext3 /dev/sda1
PRE: exist_/dev/sda1
POST: has_fs_/dev/sda1
Trying to add CMD: mkswap /dev/sda5
PRE: exist_/dev/sda5
POST: has_fs_/dev/sda5
Trying to add CMD: mkfs.ext4 /dev/sda6
PRE: exist_/dev/sda6
POST: has_fs_/dev/sda6
Trying to add CMD: mkfs.ext4 /dev/sda7
PRE: exist_/dev/sda7
POST: has_fs_/dev/sda7
Trying to add CMD: true
PRE: cleared2_/dev/sda,exist_/dev/sda7
POST: pt_complete_/dev/sda
1:true
pre:
post: exist_/dev/sda
2:wipefs -a /dev/sda1
pre: exist_/dev/sda
post: wipefs_/dev/sda1
3:true
pre: exist_/dev/sda,wipefs_/dev/sda1
post: wipefs_/dev/sda2
4:wipefs -a /dev/sda5
pre: exist_/dev/sda,wipefs_/dev/sda1,wipefs_/dev/sda2
post: wipefs_/dev/sda5
5:true
pre: exist_/dev/sda,wipefs_/dev/sda1,wipefs_/dev/sda2,wipefs_/dev/sda5
post: cleared1_/dev/sda
6:parted -s /dev/sda mklabel msdos
pre: cleared1_/dev/sda
post: cleared2_/dev/sda
7:parted -s /dev/sda mkpart primary "ext3" 1048576B 525336575B
pre: cleared2_/dev/sda
post: prep2_/dev/sda1
8:true
pre: prep2_/dev/sda1
post: exist_/dev/sda1
9:parted -s /dev/sda set 1 boot on
pre: exist_/dev/sda1,cleared2_/dev/sda
post: flag_boot_/dev/sda1
10:parted -s /dev/sda mkpart extended "" 525336576B 17179869183B
pre: cleared2_/dev/sda,exist_/dev/sda1
post: prep2_/dev/sda2
11:true
pre: prep2_/dev/sda2
post: exist_/dev/sda2
12:parted -s /dev/sda mkpart logical "linux-swap" 525337600B 2672821247B
pre: cleared2_/dev/sda,exist_/dev/sda2
post: prep2_/dev/sda5
13:true
pre: prep2_/dev/sda5
post: exist_/dev/sda5
14:parted -s /dev/sda mkpart logical "ext3" 2672822272B 6967789567B
pre: cleared2_/dev/sda,exist_/dev/sda5
post: prep2_/dev/sda6
15:true
pre: prep2_/dev/sda6
post: exist_/dev/sda6
16:parted -s /dev/sda mkpart logical "ext3" 6967790592B 17179869183B
pre: cleared2_/dev/sda,exist_/dev/sda6
post: prep2_/dev/sda7
17:true
pre: prep2_/dev/sda7
post: exist_/dev/sda7
18:mkfs.ext3 /dev/sda1
pre: exist_/dev/sda1
post: has_fs_/dev/sda1
19:mkswap /dev/sda5
pre: exist_/dev/sda5
post: has_fs_/dev/sda5
20:mkfs.ext4 /dev/sda6
pre: exist_/dev/sda6
post: has_fs_/dev/sda6
21:mkfs.ext4 /dev/sda7
pre: exist_/dev/sda7
post: has_fs_/dev/sda7
22:true
pre: cleared2_/dev/sda,exist_/dev/sda7
post: pt_complete_/dev/sda
(CMD) wipefs -a /dev/sda1 1> /tmp/y59bOfkKLY 2> /tmp/qCBs4RPM1s
Executing: wipefs -a /dev/sda1
(CMD) wipefs -a /dev/sda5 1> /tmp/xOT59WwayE 2> /tmp/qoC_AB3aoh
Executing: wipefs -a /dev/sda5
(CMD) parted -s /dev/sda mklabel msdos 1> /tmp/b6eEUM3tQq 2> /tmp/yZSbJUgFpe
Executing: parted -s /dev/sda mklabel msdos
(CMD) parted -s /dev/sda mkpart primary "ext3" 1048576B 525336575B 1> /tmp/EQHesttVO3 2> /tmp/bHWnCd_DmW
Executing: parted -s /dev/sda mkpart primary "ext3" 1048576B 525336575B
(CMD) parted -s /dev/sda set 1 boot on 1> /tmp/mMw8SRalem 2> /tmp/Wm5C80WheK
Executing: parted -s /dev/sda set 1 boot on
(CMD) parted -s /dev/sda mkpart extended "" 525336576B 17179869183B 1> /tmp/mf8gliulQx 2> /tmp/xoZEdGJkqo
Executing: parted -s /dev/sda mkpart extended "" 525336576B 17179869183B
(CMD) parted -s /dev/sda mkpart logical "linux-swap" 525337600B 2672821247B 1> /tmp/iLYjuBgeaP 2> /tmp/rNt9Ou0yLk
Executing: parted -s /dev/sda mkpart logical "linux-swap" 525337600B 2672821247B
Command had non-zero exit code
(STDERR) Warning: The resulting partition is not properly aligned for best performance.
(STDERR) Error: Error informing the kernel about modifications to partition /dev/sda2 -- Invalid argument. This means Linux won't know about any changes you made to /dev/sda2 until you reboot -- so you shouldn't mount it or use it in any way before rebooting.
(STDERR) Error: Partition(s) 2 on /dev/sda have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
