On 06/17/2016 12:21 PM, Borislav Petkov wrote:
On Mon, Jun 13, 2016 at 04:19:10PM -0500, ttha...@opensource.altera.com wrote:
From: Thor Thayer <ttha...@opensource.altera.com>
In preparation for additional memory module ECCs, add the
memory initialization functions and helper functions used
for memory initialization.
Signed-off-by: Thor Thayer <ttha...@opensource.altera.com>
---
v2: Specify INTMODE selection -> IRQ on each ECC error.
Insert functions above memory-specific functions so that function
declarations are not required.
Use ERRINTENS & ERRINTENR registers instead of read/modify/write.
v3: Changes for common compatibility string:
- Pass node instead of compatibility string.
- New altr_init_a10_ecc_device_type() for peripherals.
- Add __init to altr_init_a10_ecc_block().
- Add a10_get_irq_mask().
---
drivers/edac/altera_edac.c | 197 ++++++++++++++++++++++++++++++++++++++++++++
drivers/edac/altera_edac.h | 8 ++
2 files changed, 205 insertions(+)
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+ int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+ u32 init_mask = ALTR_A10_ECC_INITA;
+ u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+ u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+ int ret = 0;
+
+ if (port) {
+ init_mask = ALTR_A10_ECC_INITB;
+ stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+ clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+ }
Do a
u32 init_mask, stat_mask, clear_mask;
if (port) {
init_mask = ALTR_A10_ECC_INITB;
...
} else {
init_mask = ALTR_A10_ECC_INITA;
...
}
so that you don't have to repeat the assignments in the if (port) case.
OK. I only have one PORTB peripheral so normally the if (port) branch
won't execute but I see your point.
+
+ ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+ while (limit--) {
+ if (ecc_test_bits(stat_mask,
+ (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+ break;
+ udelay(1);
+ }
+ if (limit < 0)
+ ret = -EBUSY;
+
+ /* Clear any pending ECC interrupts */
+ writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+ return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
I don't understand - we're here under
#if defined(CONFIG_EDAC_ALTERA_ETHERNET)
What sharing do you mean?
I'll be adding a number of peripheral FIFOs in future patches but I
agree that the comment is misleading in this case. I'll fix it.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
