On 04/14/2014 08:29 AM, Chander Kashyap wrote:
Hi Daniel,
I am using ML u-boot and ML kernel with ramdisk as rootfs for my testing.
Hi Chander,
I tried to use u-boot ML but it fails with the error:
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ARNDALE # fatls mmc 0:2
** Unrecognized filesystem type **
ARNDALE # fatls mmc 0:1
0 file(s), 0 dir(s)
ARNDALE # fatls mmc 0:3
** Unrecognized filesystem type **
ARNDALE # fatls mmc 0:
In order to set it up I did:
make arndale_config all CROSS_COMPILE=arm-linux-gnueabi-
sudo dd if=arndale-bl1.bin of=/dev/mmcblk0 bs=512 seek=1
sudo dd if=spl/arndale-spl.bin of=/dev/mmcblk0 bs=512 seek=17
sudo dd if=u-boot-dtb.bin of=/dev/mmcblk0 bs=512 seek=49
fdisk -l /dev/mmcblk0
Disk /dev/mmcblk0: 3951 MB, 3951034368 bytes
128 heads, 32 sectors/track, 1884 cylinders, total 7716864 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 1 8191 4095+ da Non-FS data
/dev/mmcblk0p2 * 8192 114687 53248 c W95 FAT32 (LBA)
/dev/mmcblk0p3 114688 2097151 991232 83 Linux
Did I missed something ?
Thanks
-- Daniel
On 13 April 2014 03:49, Victor Kamensky <victor.kamen...@linaro.org> wrote:
Hi Daniel,
Note these patches:
https://groups.google.com/a/linaro.org/forum/#!searchin/linaro-networking/Arndale$20hotplug/linaro-networking/MdvG8m_Bjms/YSvvIYKo4NQJ
Look at PATCH 1/2. It is about wfi instruction hex code use in
CONFIG_THUMB2_KERNEL case.
Even if patch tile says BE image the issue is applicable to LE thumb2
issue. Check
your kernel config if THUMB2_KERNEL set the issue is applicable to you.
Thanks,
Victor
On 12 April 2014 14:51, Daniel Lezcano <daniel.lezc...@linaro.org> wrote:
Hi all,
I used the image:
arndale-saucy_server_20140222-611.img
I boots well but when I unplug CPU1, the kernel crashes.
It seems related to the AFTR state (an idle state of cpuidle) and the u-boot
version which is 2013-rc1. It seems this issue does not happen with a more
recent u-boot (I was not yet able to test it).
I don't know where to fill the bug for this release.
Chander, any pointer to the right u-boot version you are using successfully
?
Thanks
-- Daniel
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
