On Thu, Dec 8, 2011 at 12:49 AM, Zygmunt Krynicki <zygmunt.kryni...@linaro.org> wrote: > W dniu 08.12.2011 02:54, Ricardo Salveti pisze: >> On Wed, Dec 7, 2011 at 4:36 PM, Zygmunt Krynicki >> <zygmunt.kryni...@linaro.org> wrote: >>> I don't want to push 100% over usb but pushing 99.9 (all except to boot >>> loader) works for all boards as far as I know. This would give us >>> controllable master image (hell we could install tests before turning the >>> power on). >> >> I guess this will only be an issue with Origen, as to make ethernet to >> work at the boot loader you also need to have USB support (kind of >> similar as Panda). For the others I believe it should just work (if >> not, it's a bug). > > Getting it to work with panda would be a major milestone. I don't treat > boards as equal as they are not equal. Last time I checked uboot has lots of > USB and ethernet support so we might be able to eventually do it assuming > actual bugs in both linux kernel and uboot for origen are fixed.
For Panda at least you should have everything you need: 1 - USB booting for SPL/U-Boot with USB SPL support; 2 - Ethernet support at U-Boot with TFTP and PXE support; 3 - Unique mac address at both u-boot and kernel (same one, same code to calculate it); Once you make it work with Panda, we can later then try to have the same support at the other boards we have. Cheers, -- Ricardo Salveti de Araujo _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
