Hi, Grant, The two patches for mx51/mx53 DT support have the same issue, which is the S-O-B will be missed when you git am. Let me know if you want me re-send the two patches or you would take care when you am it? Thanks,
Best Regards, Jason Liu >-----Original Message----- >From: linaro-dev-boun...@lists.linaro.org [mailto:linaro-dev- >boun...@lists.linaro.org] On Behalf Of Jason Liu >Sent: Tuesday, March 29, 2011 4:37 PM >To: devicetree-disc...@lists.ozlabs.org >Cc: grant.lik...@linaro.org; linaro-dev@lists.linaro.org; patc...@linaro.org >Subject: [PATCH] arm/dt: Add basic device tree support for mx53 loco board > >--- >grant, uboot patches has been send to u-boot maillist Test OK on mx53 loco >board > >Signed-off-by: Jason Liu <jason....@linaro.org> >--- > arch/arm/boot/dts/mx53-loco.dts | 30 >++++++++++++++++++++++++++++++ > arch/arm/mach-mx5/Kconfig | 1 + > arch/arm/mach-mx5/board-mx53_loco.c | 5 +++++ > 3 files changed, 36 insertions(+), 0 deletions(-) > >diff --git a/arch/arm/boot/dts/mx53-loco.dts b/arch/arm/boot/dts/mx53- >loco.dts new file mode 100644 index 0000000..7347456 >--- /dev/null >+++ b/arch/arm/boot/dts/mx53-loco.dts >@@ -0,0 +1,30 @@ >+/* >+ * Copyright 2011 Linaro Ltd. >+ * >+ * The code contained herein is licensed under the GNU General Public >+ * License. You may obtain a copy of the GNU General Public License >+ * Version 2 or later at the following locations: >+ * >+ * http://www.opensource.org/licenses/gpl-license.html >+ * http://www.gnu.org/copyleft/gpl.html >+ */ >+ >+/dts-v1/; >+ >+/ { >+ model = "Freescale i.MX53 LOCO"; >+ compatible = "fsl,mx53-loco"; >+ #address-cells = <1>; >+ #size-cells = <1>; >+ >+ aliases { >+ }; >+ >+ memory { >+ device_type = "memory"; >+ reg = <0x70000000 0x40000000>; >+ }; >+ >+ chosen { >+ }; >+}; >diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index >aae51ee..a61e01e 100644 >--- a/arch/arm/mach-mx5/Kconfig >+++ b/arch/arm/mach-mx5/Kconfig >@@ -167,6 +167,7 @@ config MACH_MX53_SMD config MACH_MX53_LOCO > bool "Support MX53 LOCO platforms" > select SOC_IMX53 >+ select MX5_DT_COMMON > select IMX_HAVE_PLATFORM_IMX2_WDT > select IMX_HAVE_PLATFORM_IMX_I2C > select IMX_HAVE_PLATFORM_IMX_UART >diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach- >mx5/board-mx53_loco.c >index 0a18f8d..6ffc591 100644 >--- a/arch/arm/mach-mx5/board-mx53_loco.c >+++ b/arch/arm/mach-mx5/board-mx53_loco.c >@@ -226,10 +226,15 @@ static struct sys_timer mx53_loco_timer = { > .init = mx53_loco_timer_init, > }; > >+static const char *mx53_loco_dt_match[] __initdata = { >+ "fsl,mx53-loco", >+ NULL >+}; > MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") > .map_io = mx53_map_io, > .init_early = imx53_init_early, > .init_irq = mx53_init_irq, > .timer = &mx53_loco_timer, > .init_machine = mx53_loco_board_init, >+ .dt_compat = mx53_loco_dt_match, > MACHINE_END >-- >1.7.1 > > >_______________________________________________ >linaro-dev mailing list >linaro-dev@lists.linaro.org >http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
