On Thu, Mar 3, 2011 at 1:48 PM, Jeremy Chang <jeremy.ch...@linaro.org> wrote:
> On Thu, Mar 3, 2011 at 8:02 PM, Alexander Sack <a...@linaro.org> wrote:
>> On Thu, Mar 3, 2011 at 9:14 AM, Jeremy Chang <jeremy.ch...@linaro.org> wrote:
>>> On Thu, Mar 3, 2011 at 3:43 PM, John Stultz <john.stu...@linaro.org> wrote:
>>>> On Thu, 2011-03-03 at 15:27 +0800, Jeremy Chang wrote:
>>>>> Hi, John:
>>>>>     Thanks.  Though the problem for me is still the same.
>>>>>
>>>>>     I tried in uboot with following commands.
>>>>>     # mmc init
>>>>>     # setenv bootargs 'console=ttyO2,115200n8 mem=256M
>>>>> root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait init=/init'
>>>>>     # fatload mmc 1 0x82000000 uImage
>>>>>     # bootm 0x82000000
>>>>>
>>>>>     Any idea about if there could be any other difference in between? 
>>>>> Thanks.
>>>>
>>>> I'm baffled. Do you have any further details on the beagleboard xm
>>>> revision? I think mine is an A2.
>>>    From the box and the sticker on the board, it says Rev B.
>>>    So it looks like the u-boot I used from rowboat[1] shows RevA as
>>> below messages,
>>
>> I tarred up the boot/vfat partition that i successfully used for
>> booting our android beagle build:
>>
>>  http://people.linaro.org/~asac/tmp/beagle-boot.tar.gz
>>
>> its
>>  1. linaro u-boot with a good boot.scr that boots android from mmcblk0p2
>>  2. uImage built from johns tree using android omap3 defconfig ...
>>
>> see if that changes anything (i see output on terminal for whole boot 
>> process)
>
> Hi, Alexander:
>
> Thanks for the help.
>
> It turns out that just after I changed to using the Android toolchain
> from 4.4.3 to 4.4.0 , this problem is solved.
> So this may be the toolchain and the kernel source code compatible issue.
>

right. Until we have automated android kernel/uboot builds, please use
the linaro u-boot i gave to you and not the rowboat one.

Also, now that we have daily binary builds for android beagle, please
use those to verify whether a problem you are seeing is caused by a
local config/regression or is a real bug in our "official" builds.

Thanks!

-- 

 - Alexander

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to