On Thu, Mar 3, 2011 at 9:14 AM, Jeremy Chang <jeremy.ch...@linaro.org> wrote: > On Thu, Mar 3, 2011 at 3:43 PM, John Stultz <john.stu...@linaro.org> wrote: >> On Thu, 2011-03-03 at 15:27 +0800, Jeremy Chang wrote: >>> Hi, John: >>> Thanks. Though the problem for me is still the same. >>> >>> I tried in uboot with following commands. >>> # mmc init >>> # setenv bootargs 'console=ttyO2,115200n8 mem=256M >>> root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait init=/init' >>> # fatload mmc 1 0x82000000 uImage >>> # bootm 0x82000000 >>> >>> Any idea about if there could be any other difference in between? >>> Thanks. >> >> I'm baffled. Do you have any further details on the beagleboard xm >> revision? I think mine is an A2. > From the box and the sticker on the board, it says Rev B. > So it looks like the u-boot I used from rowboat[1] shows RevA as > below messages,
I tarred up the boot/vfat partition that i successfully used for booting our android beagle build: http://people.linaro.org/~asac/tmp/beagle-boot.tar.gz its 1. linaro u-boot with a good boot.scr that boots android from mmcblk0p2 2. uImage built from johns tree using android omap3 defconfig ... see if that changes anything (i see output on terminal for whole boot process) -- - Alexander _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
