Hi Oded, On 8/29/07, Oded Ben-Tal <[EMAIL PROTECTED]> wrote: > > > any way of correcting these things by tweaking?
As far as I know, there's no simple way of correcting these; in a similar
situation to yours I've used the following overrides, which unfortunately
involve a degree of trial and error:
For the first half of the slur, the easiest tweak is to change Slur
#'positions. It's a bit limited in scope, since LilyPond only treats it as a
suggestion for the start and end points of a slur: if the points are
considered too outlandish, it has no effect.
\once \override Slur #'positions = #'(6 . 8.4)
The second half of the slur is a bit more difficult to tweak, since you
don't want an override to influence both elements of the slur. The solution
I've found useful is adapted from section 9.3.8, "Difficult tweaks". This
uses a scheme function to check whether a spanner object (slur or tie, etc.
) has been broken in two across a break, then sets a property only on the
second element (i.e. the part of the slur after the break):
#(define (my-callback grob)
(let* (
; have we been split?
(orig (ly:grob-original grob))
; if yes, get the split pieces (our siblings)
(siblings (if (ly:grob? orig)
(ly:spanner-broken-into orig) '() )))
(if (and (>= (length siblings) 2)
(eq? (car (last-pair siblings)) grob))
(ly:grob-set-property! grob 'control-points '((4 . 9) (6 .
13) (17 . 14) (21 . 12)))))) %The override
By setting the slur property #'control-points, you can set the slur shape
manually (a third-order Bézier curve).
The scheme function is called using the property #'after-line-breaking as
follows:
\once \override Slur #'after-line-breaking = #my-callback
Here's your code with the overrides included:
\version "2.11.30"
#(define (my-callback grob)
(let* (
; have we been split?
(orig (ly:grob-original grob))
; if yes, get the split pieces (our siblings)
(siblings (if (ly:grob? orig)
(ly:spanner-broken-into orig) '() )))
(if (and (>= (length siblings) 2)
(eq? (car (last-pair siblings)) grob))
(ly:grob-set-property! grob 'control-points '((4 . 9) (6 .
13) (17 . 14) (21 . 12))))))
upper = \relative c''
{ \clef treble \time 6/4 r1.
a8([ g e' e, d c] g'[ \change Staff = down \stemUp g, f e])
\once \override Slur #'positions = #'(6 . 8.4) %This is a bit short of
the upper stave, could use #'control-points instead
\once \override Slur #'after-line-breaking = #my-callback <gis d'>4^( ~
\break
<gis d'>8[ c \change Staff = up \stemDown a' a,] \stemUp f'4) ~ f8([ e
bes' bes, f' e]) r1. r1. r1. }
lower = \relative c, { \clef bass r1.
c,8([ c' g' bes e g] bes) r \stemDown bes,,_([ bes' e, e'])
f,,_([ f' c' f]) \stemUp a,,( a') g,([ g' e' g]) bes,,( bes') r1. r1.
r1.
}
\score {
\new PianoStaff <<
\new Staff = "up" \upper
\new Staff = "down" \lower
>>
\layout {
\context { \Staff
\override VerticalAxisGroup #'minimum-Y-extent = #'(-6 . 6)
%Make both staves same height under 2.11
}
}
}
The bad news is that the scheme override only works under 2.11 for the
property control-points. From your pictures, it looks as if you're using
2.10 ( the fixed distance between staves is a giveaway).
Regards,
Neil
<<attachment: brahms.PNG>>
_______________________________________________ lilypond-user mailing list lilypond-user@gnu.org http://lists.gnu.org/mailman/listinfo/lilypond-user
