Greetings All,
For other learners reading this thread in the future, I just thought I would
mention that since the details property of Tie is an association list
(alist), you can specify the values in Scheme in a way that I personally
find more readable and less noisy. Here's the syntax, just using the Tie
default values:
\override Tie.details =
#'((ratio . 0.333)
(center-staff-line-clearance . 0.6)
(tip-staff-line-clearance . 0.45)
(note-head-gap . 0.2)
(stem-gap . 0.35)
(height-limit . 1.0)
(horizontal-distance-penalty-factor . 10)
(same-dir-as-stem-penalty . 8)
(min-length-penalty-factor . 26)
(tie-tie-collision-distance . 0.45)
(tie-tie-collision-penalty . 25.0)
(intra-space-threshold . 1.25)
(outer-tie-vertical-distance-symmetry-penalty-factor . 10)
(outer-tie-length-symmetry-penalty-factor . 10)
(vertical-distance-penalty-factor . 7)
(outer-tie-vertical-gap . 0.25)
(multi-tie-region-size . 3)
(single-tie-region-size . 4)
(between-length-limit . 1.0))
Refer to NR Section 5.2.6 Modifying alists.
Andrew
-----Original Message-----
From: lilypond-user On Behalf Of Karol Majewski
Sent: Tuesday, 25 October 2016 7:07 AM
Subject: Re: Tie settings question
I work really hard to make LilyPond ties look the way I want. My current
settings are the following:
\override Tie.details.height-limit = #1.25
\override Tie.details.ratio = #0.25
\override Tie.details.between-length-limit = #1
\override Tie.details.wrong-direction-offset-penalty = #10
\override Tie.details.min-length = #2
\override Tie.details.min-length-penalty-factor = #30
\override Tie.details.center-staff-line-clearance = #0.05
\override Tie.details.tip-staff-line-clearance = #0.05
\override Tie.details.staff-line-collision-penalty = #0
\override Tie.details.dot-collision-clearance = #0
\override Tie.details.dot-collision-penalty = #0
\override Tie.details.note-head-gap = #0.15
\override Tie.details.stem-gap = #0.15
\override Tie.details.tie-column-monotonicity-penalty = #100
\override Tie.details.tie-tie-collision-penalty = #25
\override Tie.details.tie-tie-collision-distance = #0.5
\override Tie.details.horizontal-distance-penalty-factor = #0
\override Tie.details.same-dir-as-stem-penalty = #20
\override Tie.details.vertical-distance-penalty-factor = #10
\override Tie.details.intra-space-threshold = #0
\override Tie.details.outer-tie-length-symmetry-penalty-factor = #0
\override
Tie.details.outer-tie-vertical-distance-symmetry-penalty-factor = #0
\override Tie.details.outer-tie-vertical-gap = #0
\override Tie.details.single-tie-region-size = #4
\override Tie.details.skyline-padding = #0.05
\override Tie.details.multi-tie-region-size = #1
\override Tie.line-thickness = #0.25
\override Tie.thickness = #2
_______________________________________________
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
