sd/source/ui/view/drviews2.cxx | 206 +++++++++++++++++++++++++++++++++--------
1 file changed, 169 insertions(+), 37 deletions(-)
New commits:
commit b306a12710ce9f38a37bcaef86cf74e74beab706
Author: Attila Szűcs <attila.sz...@collabora.com>
AuthorDate: Wed Feb 5 13:38:41 2025 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Feb 18 10:52:46 2025 +0100
SD: fillapi-slide: format text parts
Implemented way to select partial text in a text object, and use
uno commands to format them.
Tested several uno commands.
to avoid some JSON validity issue:
"Transforms"
"SlideCommands"
"EditTextObject."
can have array value also, not just object values (as previously)
New useable commands:
{ "EditTextObject.1": [ // start to edit the object-1 on the actual slide
// multiple commands can be inside of it
New useable commands inside of "EditTextObject.1"
{"SelectParagraph": 1}, //select the paragraph-1 text in the edited
textobject
{"SelectText": [0,1,0,3] }, //select text
// 0.paragraph,1.character - 0.paragraph 3.character
// can be used with less parameter
// [] = select all text (=[0,0,*,*])
// [1] = select the full paragraph 1 text (=[1,0,1,*])
// [1,2] = position cursor to paragraph 1, char 2.. no selection
(=[1,2,1,2])
// [1,2,3] = select the text between 1. para 2. char - 3.para last char
(=[1,2,3,*])
{"InsertText": "-Inserted-"}, //insert text "-Inserted-" into the actual
textobject
// to the selected place. It can insert multiple paragraps. "--
++" = 2 paragraph
// if a text is selected, it will replace that,
// if cursor was set without selection, then it will extend the text there.
// It will select the newly inserted tex, so it can be formatted right away
{"UnoCommand": ".uno:Bold"}, //run the uno command ".uno:Bold" that
change the
// selected text format to bold.
several basic formatting unoCommands that worked:
".uno:Bold", ".uno:Italic", ".uno:Strikeout", ".uno:Shadowed",
.uno:Underline
".uno:DefaultBullet", .uno:DefaultNumbering
".uno:SuperScript", ".uno:SubScript"
// all previous commands are toggle command
// useing them on a bold text will make it not-bold
".uno:CenterPara", ".uno:RightPara", ".uno:LeftPara", ".uno:JustifyPara"
// these commands set the horizontal alignment of whole paragraphs.
".uno:Color {\"Color.Color\":{\"type\":\"long\",\"value\":2777241}}"
// set the selected text color to: 2777241 it is a blue like color
".uno:CharBackColor
{\"CharBackColor.Color\":{\"type\":\"long\",\"value\":6710886}}"
// set the background color of the selected text to: 6710886 it is a gray
color
a sample transform:
{
"Transforms": [
{ "SlideCommands": [
{"JumpToSlide": 0},
{"EditTextObject.1": [
{"SelectParagraph": 1},
{"InsertText": "----
++++"},
{"UnoCommand": ".uno:DefaultNumbering"},
{"SelectText": [0,1,0,3] },
{"InsertText": "-Inserted-"},
{"UnoCommand": ".uno:Underline"},
{"UnoCommand": ".uno:Bold"},
{"UnoCommand": ".uno:Italic"},
{"UnoCommand": ".uno:Strikeout"},
{"UnoCommand": ".uno:Shadowed"},
{"UnoCommand": ".uno:JustifyPara"},
{"UnoCommand": ".uno:DefaultBullet"},
{"UnoCommand": ".uno:SuperScript"},
{"SelectText": [0,14,0,17] },
{"UnoCommand": ".uno:SubScript"},
{"UnoCommand": ".uno:Color
{\"Color.Color\":{\"type\":\"long\",\"value\":2777241}}"},
{"UnoCommand": ".uno:CharBackColor
{\"CharBackColor.Color\":{\"type\":\"long\",\"value\":6710886}}"},
{"SelectParagraph": 1},
{"UnoCommand": ".uno:CenterPara"},
{"SelectParagraph": 2},
{"UnoCommand": ".uno:RightPara"},
{"SelectParagraph": 3},
{"UnoCommand": ".uno:LeftPara"}
] }
] }
]
}
Change-Id: I90eba60f8b31e48c681283fa27a6c7daa1886141
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/181778
Tested-by: Jenkins
Reviewed-by: Miklos Vajna <vmik...@collabora.com>
diff --git a/sd/source/ui/view/drviews2.cxx b/sd/source/ui/view/drviews2.cxx
index da1a1a990e86..1e6b14682cd9 100644
--- a/sd/source/ui/view/drviews2.cxx
+++ b/sd/source/ui/view/drviews2.cxx
@@ -79,6 +79,7 @@
#include <svx/hlnkitem.hxx>
#include <svx/imapdlg.hxx>
#include <svx/sdtagitm.hxx>
+#include <svx/svdetc.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <svx/svdpagv.hxx>
@@ -207,6 +208,7 @@
#include <iostream>
#include <boost/property_tree/json_parser.hpp>
#include <rtl/uri.hxx>
+#include <editeng/editeng.hxx>
using namespace ::com::sun::star;
@@ -261,6 +263,55 @@ void lcl_LogWarning(const std::string& rWarning)
LOK_WARN("sd.transform", rWarning);
}
+void lcl_UnoCommand(const std::string& rText)
+{
+ if (rText.size() > 0)
+ {
+ OUString aCmd;
+ std::vector<beans::PropertyValue> aArg;
+ std::size_t nSpace = rText.find(' ');
+ if (nSpace != std::string::npos)
+ {
+ aCmd = OStringToOUString(rText.substr(0, nSpace),
RTL_TEXTENCODING_UTF8);
+ std::string aArgText = rText.substr(nSpace + 1);
+
+ aArg = comphelper::JsonToPropertyValues(aArgText);
+ }
+ else
+ {
+ aCmd = OStringToOUString(rText, RTL_TEXTENCODING_UTF8);
+ }
+
+ OUString aCmdSub;
+ if (aCmd.startsWith(".uno:"))
+ {
+ aCmdSub = aCmd.subView(5);
+ }
+ else
+ {
+ lcl_LogWarning("FillApi SlideCmd: uno command not recognized'" +
rText + "'");
+ return;
+ }
+
+ // Check if the uno command is allowed
+ const std::map<std::u16string_view, KitUnoCommand>& rUnoCommandList
+ = GetKitUnoCommandList();
+ auto aCmdData = rUnoCommandList.find(aCmdSub);
+ if (aCmdData != rUnoCommandList.end())
+ {
+ // Make the uno command synchron
+ aArg.push_back(comphelper::makePropertyValue("SynchronMode",
true));
+
+ // Todo: check why it does not work on my windows system
+ comphelper::dispatchCommand(aCmd,
comphelper::containerToSequence(aArg));
+ }
+ else
+ {
+ lcl_LogWarning("FillApi SlideCmd: uno command not recognized'" +
rText + "'");
+ }
+ }
+}
+
class ClassificationCommon
{
protected:
@@ -788,8 +839,13 @@ void DrawViewShell::FuTemporary(SfxRequest& rReq)
if (aItem.first == "Transforms")
{
// Handle all transformations
- for (const auto& aItem2 : aItem.second)
+ for (const auto& aItem2Obj : aItem.second)
{
+ // handle `"Transforms": { ` and `"Transforms": [`
cases as well
+ // if an element is an object `{...}`, then get the
first element of the object
+ const auto& aItem2
+ = aItem2Obj.first == "" ?
*aItem2Obj.second.ordered_begin() : aItem2Obj;
+
//jump to slide
if (aItem2.first == "SlideCommands")
{
@@ -797,7 +853,10 @@ void DrawViewShell::FuTemporary(SfxRequest& rReq)
int nNextPageId = 0;
for (const auto& aItem3Obj : aItem2.second)
{
- const auto& aItem3 =
*aItem3Obj.second.ordered_begin();
+ // It accept direct property, or object as well
+ const auto& aItem3 = aItem3Obj.first == ""
+ ?
*aItem3Obj.second.ordered_begin()
+ : aItem3Obj;
sal_uInt16 nPageCount
=
GetDoc()->GetSdPageCount(PageKind::Standard);
@@ -1152,8 +1211,7 @@ void DrawViewShell::FuTemporary(SfxRequest& rReq)
|| aItem3.first == "UnMarkObject")
{
bool bUnMark = aItem3.first ==
"UnMarkObject";
- int nObjId
- =
static_cast<AutoLayout>(aItem3.second.get_value<int>());
+ int nObjId =
aItem3.second.get_value<int>();
SdPage* pPageStandard
= GetDoc()->GetSdPage(nActPageId,
PageKind::Standard);
@@ -1180,48 +1238,122 @@ void DrawViewShell::FuTemporary(SfxRequest& rReq)
+ "' (Object Count = " +
std::to_string(nObjId));
}
}
- else if (aItem3.first == "UnoCommand")
+
+ else if
(aItem3.first.starts_with("EditTextObject."))
{
- std::string aText =
aItem3.second.get_value<std::string>();
- if (aText.size() > 0)
+ int nObjId = stoi(aItem3.first.substr(15));
+ SdPage* pPageStandard
+ = GetDoc()->GetSdPage(nActPageId,
PageKind::Standard);
+ int nObjCount =
pPageStandard->GetObjCount();
+ if (nObjId < 0)
{
- OUString aCmd;
- std::vector<beans::PropertyValue> aArg;
- std::size_t nSpace = aText.find(' ');
- if (nSpace != std::string::npos)
- {
- aCmd =
OStringToOUString(aText.substr(0, nSpace),
-
RTL_TEXTENCODING_UTF8);
- std::string aArgText =
aText.substr(nSpace + 1);
-
- aArg =
comphelper::JsonToPropertyValues(aArgText);
- }
- else
- {
- aCmd = OStringToOUString(aText,
RTL_TEXTENCODING_UTF8);
- }
-
- // Check if the uno command is allowed
- const std::map<std::u16string_view,
KitUnoCommand>& rUnoCommandList = GetKitUnoCommandList();
- const bool bSupportedCmd =
rUnoCommandList.find(aCmd) != rUnoCommandList.end();
- if (bSupportedCmd)
+ lcl_LogWarning(
+ "FillApi SlideCmd EditTextObject:
Object idx < 0. '"
+ + aItem3.first + "'");
+ }
+ else if (nObjId >= nObjCount)
+ {
+ lcl_LogWarning(
+ "FillApi SlideCmd EditTextObject:
Object idx >= "
+ "Object Count. '"
+ + aItem3.first
+ + "' (Object Count = " +
std::to_string(nPageCount));
+ }
+ else
+ {
+ SdrObject* pSdrObj =
pPageStandard->GetObj(nObjId);
+ if (!pSdrObj->IsSdrTextObj())
{
- // Make the uno command synchron
-
aArg.push_back(comphelper::makePropertyValue(
- "SynchronMode", true));
-
- // Todo: check why it does not
work on my windows system
- comphelper::dispatchCommand(
- aCmd,
comphelper::containerToSequence(aArg));
+ lcl_LogWarning(
+ "FillApi SlideCmd
EditTextObject: Object is "
+ "not a TextObject. '"
+ + aItem3.first + "'");
}
else
{
- lcl_LogWarning(
- "FillApi SlideCmd: uno command
not recognized'"
- + aText + "'");
+ SdrTextObj* pSdrTxt =
static_cast<SdrTextObj*>(pSdrObj);
+ SdrView* pView1 = GetView();
+ pView1->MarkObj(pSdrTxt,
pView1->GetSdrPageView());
+ pView1->SdrBeginTextEdit(pSdrTxt);
+ EditView& rEditView
+ =
pView1->GetTextEditOutlinerView()->GetEditView();
+ for (const auto& aItem4Obj :
aItem3.second)
+ {
+ const auto& aItem4
+ = aItem4Obj.first == ""
+ ?
*aItem4Obj.second.ordered_begin()
+ : aItem4Obj;
+
+ if (aItem4.first ==
"SelectText")
+ {
+ std::vector<int> aValues;
+ for (const auto& aItem5 :
aItem4.second)
+ {
+ //if == last?
+
aValues.push_back(aItem5.second.get_value<int>());
+ }
+ if (aValues.size() == 0)
+ {
+ //select the whole text
+ aValues.push_back(0);
+ aValues.push_back(0);
+
aValues.push_back(EE_PARA_MAX);
+
aValues.push_back(EE_TEXTPOS_MAX);
+ }
+ else if (aValues.size() ==
1)
+ {
+ //select the paragraph
+ aValues.push_back(0);
+
aValues.push_back(aValues[0]);
+
aValues.push_back(EE_TEXTPOS_MAX);
+ }
+ else if (aValues.size() ==
2)
+ {
+ // set the cursor
without selecting anything
+
aValues.push_back(aValues[0]);
+
aValues.push_back(aValues[1]);
+ }
+ else if (aValues.size() ==
3)
+ {
+
aValues.push_back(EE_TEXTPOS_MAX);
+ }
+
+ const ESelection
rNewSel(aValues[0], aValues[1],
+
aValues[2], aValues[3]);
+
rEditView.SetSelection(rNewSel);
+ }
+ else if (aItem4.first ==
"SelectParagraph")
+ {
+ int nParaId =
aItem4.second.get_value<int>();
+
+ const ESelection
rNewSel(nParaId, 0, nParaId,
+
EE_TEXTPOS_MAX);
+
rEditView.SetSelection(rNewSel);
+ }
+ else if (aItem4.first ==
"InsertText")
+ {
+ OUString aText =
OStringToOUString(
+
aItem4.second.get_value<std::string>(),
+ RTL_TEXTENCODING_UTF8);
+ // It select the inserted
text also
+
rEditView.InsertText(aText, true);
+ }
+ else if (aItem4.first ==
"UnoCommand")
+ {
+ std::string aText
+ =
aItem4.second.get_value<std::string>();
+ lcl_UnoCommand(aText);
+ }
+ }
+ pView1->SdrEndTextEdit();
}
}
}
+ else if (aItem3.first == "UnoCommand")
+ {
+ std::string aText =
aItem3.second.get_value<std::string>();
+ lcl_UnoCommand(aText);
+ }
}
}
}
