Hello, On Wed, Apr 18, 2018 at 11:34 AM, Kristian Evensen <kristian.even...@gmail.com> wrote: > I will keep an eye on this router, just in case, but it seems the > problem is gone. Thanks for fixing it so fast!
The router (WG3526) has been running fine for a while now, but after changing configuration from client to access point (for both interfaces) and updating I started seeing kernel oopses + reboot loops again. The error messages is as follows: [ 30.665207] CPU 1 Unable to handle kernel paging request at virtual address ea09a0dd, epc == 8f3a060c, ra == 8ed06fac [ 30.676034] Oops[#1]: [ 30.678341] CPU: 1 PID: 27 Comm: kworker/u8:1 Not tainted 4.14.37 #0 [ 30.684852] Workqueue: phy0 ieee80211_ibss_leave [mac80211] [ 30.690409] task: 8fce8000 task.stack: 8fce4000 [ 30.694922] $ 0 : 00000000 00000001 7ac0ae80 00000020 [ 30.700149] $ 4 : 8ec4cbc0 8ee83c20 ea099ae0 8f79f400 [ 30.705373] $ 8 : 00000000 80452db0 00000007 00096a93 [ 30.710593] $12 : 00000000 00000264 000390fa 77f5d3c0 [ 30.715812] $16 : 8ec4d560 8f581000 8ee83480 8ec4cbc0 [ 30.721033] $20 : 00000000 00000000 80560000 fffffffe [ 30.726252] $24 : 00000fa3 80058514 [ 30.731475] $28 : 8fce4000 8fce5ce8 80570000 8ed06fac [ 30.736697] Hi : 0000000a [ 30.739562] Lo : 66666669 [ 30.742470] epc : 8f3a060c 0x8f3a060c [ 30.746401] ra : 8ed06fac sta_set_sinfo+0xcc/0xbb0 [mac80211] [ 30.752380] Status: 11007c03 KERNEL EXL IE [ 30.756561] Cause : 40800008 (ExcCode 02) [ 30.760550] BadVA : ea09a0dd [ 30.763418] PrId : 0001992f (MIPS 1004Kc) [ 30.767492] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6p [ 30.838554] nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table [ 30.909546] ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_sd [ 30.979947] ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug usbcore nls_base usb_common mii [ 30.989345] Process kworker/u8:1 (pid: 27, threadinfo=8fce4000, task=8fce8000, tls=00000000) [ 30.997742] Stack : 00000200 00000000 8fce5d78 00000000 8fce5d78 80081240 8f79f400 8f581000 [ 31.006092] 8ee83480 8ec4cbc0 8f581130 00000000 80560000 fffffffe 80570000 8ed06fac [ 31.014443] 00000000 8f581000 8fc06000 8ee834ac 8f581000 8ec4cbc0 8f581000 8f79f400 [ 31.022793] 8ee83480 8ee834ac 8ec4cbc0 00000000 80560000 8ed07a10 8f148a80 8007be74 [ 31.031143] 00000000 00000000 8fce5d70 8fce5d70 00000000 8f581000 8fc06000 8ed07ac0 [ 31.039491] ... [ 31.041940] Call Trace: [ 31.044386] [<8f3a060c>] 0x8f3a060c [ 31.047866] Code: 000630c0 02063021 94f40002 <90d205fd> 00e0b025 16800002 3253ffff 2414001f 96d50004 [ 31.057611] [ 31.059362] ---[ end trace 7868a781b307fb50 ]--- [ 31.068983] Kernel panic - not syncing: Fatal exception [ 31.076144] Rebooting in 3 seconds.. I will try to compile an image with KALLMSYS and see if I can reproduce the issue. My firmware is based on latest nightly. BR, Kristian _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
