On 09.02.2018 23:48, Hauke Mehrtens wrote:
On 02/09/2018 12:27 AM, Lucian Cristian wrote:
On 21.01.2018 19:53, Hauke Mehrtens wrote:
This add support for kernel 4.14 to the mvebu target. My main reason to
add kernel 4.14 support is to make it easier to also add support for the
Marvell Armada 3700LP ARM64 SoCs especially the ESPRESSObin board.
I do not have any of the currently supported boards so I can not runtime
test this myself, Lucian Cristian already tested an older version of
these patches on one of his boards.
My current working tree for this target can be found here:
https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mvebu-4.14
This tree also contains the code needed for the ESPRESSObin, but we
still have some problems with the image creation, the bootloader boots
by default the kernel + dtb from a ext4 file system on a SD card and
also uses this partition as root file system.
Tomasz Maciej Nowak is working on the image generation for the
ESPRESSObin board.
I am waiting for positive and negative feedback on these patches, if you
run into a problem which you do not have with kernel 4.9 please report
this.
changes in:
v2:
* refresh on current generic kernel 4.14 integration
* create ubifs fs format version 4 also with kernel 4.14, this should
fix sysupgrade (downgrade) from kernel 4.14 to 4.9
* rename the wireless driver path when upgrading
Hauke Mehrtens (5):
kernel: ubifs: create use file system format 4 by default
mvebu: move files to files-4.9 and files-4.4 folder
mvebu: copy config and patches from 4.9 to 4.14
mvebu: Make kernel 4.14 patches apply
mvebu: migrate uci config to new PCIe path
target/linux/generic/config-4.14 | 1 +
...ption-to-create-UBI-FS-version-4-on-empty.patch | 63 ++
.../base-files/etc/uci-defaults/05-migrate-wifi | 23 +
target/linux/mvebu/config-4.14 | 486 ++++++++++
.../arch/arm/boot/dts/armada-385-linksys-rango.dts | 0
.../arm/boot/dts/armada-385-linksys-shelby.dts | 0
.../arch/arm/boot/dts/armada-385-linksys-rango.dts | 0
.../arm/boot/dts/armada-385-linksys-shelby.dts | 0
.../mvebu/patches-4.14/002-add_powertables.patch | 770
++++++++++++++++
.../mvebu/patches-4.14/003-add_switch_nodes.patch | 40 +
.../004-add_sata_disk_activity_trigger.patch | 39 +
.../mvebu/patches-4.14/100-find_active_root.patch | 60 ++
.../mvebu/patches-4.14/102-revert_i2c_delay.patch | 15 +
.../103-remove-nand-driver-bug.patch | 0
.../104-linksys_mamba_disable_keep_config.patch | 10 +
.../110-pxa3xxx_revert_irq_thread.patch | 69 ++
.../205-armada-385-rd-mtd-partitions.patch | 0
.../206-ARM-mvebu-385-ap-Add-partitions.patch | 0
.../patches-4.14/210-clearfog_switch_node.patch | 21 +
.../300-mvneta-tx-queue-workaround.patch | 35 +
...bu-indicate-failure-to-enter-deeper-sleep.patch | 40 +
.../401-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++
.../402-sfp-display-SFP-module-information.patch | 290 ++++++
.../403-net-mvneta-convert-to-phylink.patch | 979
+++++++++++++++++++++
.../404-net-mvneta-hack-fix-phy_interface.patch | 28 +
...disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch | 56 ++
...-mvneta-add-module-EEPROM-reading-support.patch | 44 +
...y-fixed-phy-remove-fixed_phy_update_state.patch | 80 ++
...dule-eeprom-ethtool-access-into-netdev-co.patch | 181 ++++
...409-sfp-use-netdev-sfp_bus-for-start-stop.patch | 34 +
...-allow-marvell-10G-phy-support-to-use-SFP.patch | 130 +++
.../patches-4.14/411-sfp-add-sfp-compatible.patch | 24 +
...-armada388-clearfog-emmc-on-clearfog-base.patch | 87 ++
...ada388-clearfog-increase-speed-of-i2c0-to.patch | 42 +
...armada388-clearfog-add-SFP-module-support.patch | 81 ++
...dts-armada388-clearfog-document-MPP-usage.patch | 124 +++
36 files changed, 3912 insertions(+)
create mode 100644
target/linux/generic/pending-4.14/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
create mode 100644
target/linux/mvebu/base-files/etc/uci-defaults/05-migrate-wifi
create mode 100644 target/linux/mvebu/config-4.14
copy target/linux/mvebu/{files =>
files-4.4}/arch/arm/boot/dts/armada-385-linksys-rango.dts (100%)
copy target/linux/mvebu/{files =>
files-4.4}/arch/arm/boot/dts/armada-385-linksys-shelby.dts (100%)
rename target/linux/mvebu/{files =>
files-4.9}/arch/arm/boot/dts/armada-385-linksys-rango.dts (100%)
rename target/linux/mvebu/{files =>
files-4.9}/arch/arm/boot/dts/armada-385-linksys-shelby.dts (100%)
create mode 100644
target/linux/mvebu/patches-4.14/002-add_powertables.patch
create mode 100644
target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch
create mode 100644
target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch
create mode 100644
target/linux/mvebu/patches-4.14/100-find_active_root.patch
create mode 100644
target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch
copy target/linux/mvebu/{patches-4.9 =>
patches-4.14}/103-remove-nand-driver-bug.patch (100%)
create mode 100644
target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch
create mode 100644
target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch
copy target/linux/mvebu/{patches-4.9 =>
patches-4.14}/205-armada-385-rd-mtd-partitions.patch (100%)
copy target/linux/mvebu/{patches-4.9 =>
patches-4.14}/206-ARM-mvebu-385-ap-Add-partitions.patch (100%)
create mode 100644
target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch
create mode 100644
target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch
create mode 100644
target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
create mode 100644
target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch
create mode 100644
target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch
create mode 100644
target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch
create mode 100644
target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch
create mode 100644
target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
create mode 100644
target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch
create mode 100644
target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch
create mode 100644
target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch
create mode 100644
target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch
create mode 100644
target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch
create mode 100644
target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch
create mode 100644
target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
create mode 100644
target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch
create mode 100644
target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
create mode 100644
target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
latest update 4.14.18 fails with
Applying
../target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch
using plaintext:
patching file drivers/net/phy/marvell10g.c
Hunk #1 FAILED at 15.
This is fixed now in my branch now, see:
https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mvebu-4.14
Hauke
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
I fixed it by myself, but I wanted you to know, for sure is good to be
merged!
uname -a
Linux wrt 4.14.18 #0 SMP Thu Feb 8 18:04:38 2018 armv7l GNU/Linux
root@wrt:~# uptime
04:48:12 up 1 day, 2:58, load average: 0.00, 0.00, 0.00
Regards!
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
