On 02/09/2018 12:27 AM, Lucian Cristian wrote: > On 21.01.2018 19:53, Hauke Mehrtens wrote: >> This add support for kernel 4.14 to the mvebu target. My main reason to >> add kernel 4.14 support is to make it easier to also add support for the >> Marvell Armada 3700LP ARM64 SoCs especially the ESPRESSObin board. >> >> I do not have any of the currently supported boards so I can not runtime >> test this myself, Lucian Cristian already tested an older version of >> these patches on one of his boards. >> >> My current working tree for this target can be found here: >> https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mvebu-4.14 >> >> This tree also contains the code needed for the ESPRESSObin, but we >> still have some problems with the image creation, the bootloader boots >> by default the kernel + dtb from a ext4 file system on a SD card and >> also uses this partition as root file system. >> Tomasz Maciej Nowak is working on the image generation for the >> ESPRESSObin board. >> >> I am waiting for positive and negative feedback on these patches, if you >> run into a problem which you do not have with kernel 4.9 please report >> this. >> >> changes in: >> v2: >> * refresh on current generic kernel 4.14 integration >> * create ubifs fs format version 4 also with kernel 4.14, this should >> fix sysupgrade (downgrade) from kernel 4.14 to 4.9 >> * rename the wireless driver path when upgrading >> >> >> Hauke Mehrtens (5): >> kernel: ubifs: create use file system format 4 by default >> mvebu: move files to files-4.9 and files-4.4 folder >> mvebu: copy config and patches from 4.9 to 4.14 >> mvebu: Make kernel 4.14 patches apply >> mvebu: migrate uci config to new PCIe path >> >> target/linux/generic/config-4.14 | 1 + >> ...ption-to-create-UBI-FS-version-4-on-empty.patch | 63 ++ >> .../base-files/etc/uci-defaults/05-migrate-wifi | 23 + >> target/linux/mvebu/config-4.14 | 486 ++++++++++ >> .../arch/arm/boot/dts/armada-385-linksys-rango.dts | 0 >> .../arm/boot/dts/armada-385-linksys-shelby.dts | 0 >> .../arch/arm/boot/dts/armada-385-linksys-rango.dts | 0 >> .../arm/boot/dts/armada-385-linksys-shelby.dts | 0 >> .../mvebu/patches-4.14/002-add_powertables.patch | 770 >> ++++++++++++++++ >> .../mvebu/patches-4.14/003-add_switch_nodes.patch | 40 + >> .../004-add_sata_disk_activity_trigger.patch | 39 + >> .../mvebu/patches-4.14/100-find_active_root.patch | 60 ++ >> .../mvebu/patches-4.14/102-revert_i2c_delay.patch | 15 + >> .../103-remove-nand-driver-bug.patch | 0 >> .../104-linksys_mamba_disable_keep_config.patch | 10 + >> .../110-pxa3xxx_revert_irq_thread.patch | 69 ++ >> .../205-armada-385-rd-mtd-partitions.patch | 0 >> .../206-ARM-mvebu-385-ap-Add-partitions.patch | 0 >> .../patches-4.14/210-clearfog_switch_node.patch | 21 + >> .../300-mvneta-tx-queue-workaround.patch | 35 + >> ...bu-indicate-failure-to-enter-deeper-sleep.patch | 40 + >> .../401-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++ >> .../402-sfp-display-SFP-module-information.patch | 290 ++++++ >> .../403-net-mvneta-convert-to-phylink.patch | 979 >> +++++++++++++++++++++ >> .../404-net-mvneta-hack-fix-phy_interface.patch | 28 + >> ...disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch | 56 ++ >> ...-mvneta-add-module-EEPROM-reading-support.patch | 44 + >> ...y-fixed-phy-remove-fixed_phy_update_state.patch | 80 ++ >> ...dule-eeprom-ethtool-access-into-netdev-co.patch | 181 ++++ >> ...409-sfp-use-netdev-sfp_bus-for-start-stop.patch | 34 + >> ...-allow-marvell-10G-phy-support-to-use-SFP.patch | 130 +++ >> .../patches-4.14/411-sfp-add-sfp-compatible.patch | 24 + >> ...-armada388-clearfog-emmc-on-clearfog-base.patch | 87 ++ >> ...ada388-clearfog-increase-speed-of-i2c0-to.patch | 42 + >> ...armada388-clearfog-add-SFP-module-support.patch | 81 ++ >> ...dts-armada388-clearfog-document-MPP-usage.patch | 124 +++ >> 36 files changed, 3912 insertions(+) >> create mode 100644 >> target/linux/generic/pending-4.14/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch >> >> create mode 100644 >> target/linux/mvebu/base-files/etc/uci-defaults/05-migrate-wifi >> create mode 100644 target/linux/mvebu/config-4.14 >> copy target/linux/mvebu/{files => >> files-4.4}/arch/arm/boot/dts/armada-385-linksys-rango.dts (100%) >> copy target/linux/mvebu/{files => >> files-4.4}/arch/arm/boot/dts/armada-385-linksys-shelby.dts (100%) >> rename target/linux/mvebu/{files => >> files-4.9}/arch/arm/boot/dts/armada-385-linksys-rango.dts (100%) >> rename target/linux/mvebu/{files => >> files-4.9}/arch/arm/boot/dts/armada-385-linksys-shelby.dts (100%) >> create mode 100644 >> target/linux/mvebu/patches-4.14/002-add_powertables.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/100-find_active_root.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch >> copy target/linux/mvebu/{patches-4.9 => >> patches-4.14}/103-remove-nand-driver-bug.patch (100%) >> create mode 100644 >> target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch >> copy target/linux/mvebu/{patches-4.9 => >> patches-4.14}/205-armada-385-rd-mtd-partitions.patch (100%) >> copy target/linux/mvebu/{patches-4.9 => >> patches-4.14}/206-ARM-mvebu-385-ap-Add-partitions.patch (100%) >> create mode 100644 >> target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch >> create mode 100644 >> target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch >> >> create mode 100644 >> target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch >> >> > latest update 4.14.18 fails with > > Applying > ../target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch > using plaintext: > patching file drivers/net/phy/marvell10g.c > Hunk #1 FAILED at 15.
This is fixed now in my branch now, see: https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mvebu-4.14 Hauke _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
