On 2018-02-02 13:17, Denis Periša wrote:
Anyhow, I managed to do it.
I booted new LEDE iniramfs kernel..
Then did ubiformat, ubiattach, ubimkvol on mtd6 ONLY, I labeled it "rootfs"
mounted it, transfered rootfs.tar.gz and extracted..
then booted initramfs kernel of old openwrt and formatted mtd5 ONLY
and only block device like mtd erase kernel
then I mounted kernel mtdblock5 , transfered -lzma.elf kernel and rebooted.
viola, boots with lot of nand errors, but I see it working good.
so .. if I could help someone.. here it is.!
I hope there can be some nand error checking in sysupgrade!
sysupgrade says it flashed success but bootloader says there is no kernel.
Other device - no problem.
On Fri, Feb 2, 2018 at 1:04 PM, Denis Periša <de...@denis.in> wrote:
Thank you for the information.
I have 2 identical (very old) Mikrotik RB2011 devices which have run
unaltered for many years but are now flashed to OpenWrt for another purpose.
1 of the devices showed the same behaviour you described.
I will definitely try this on the broken device.
Thanks for taking the effort to share this!
Koen
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
