On 01/31/2018 01:56 PM, Denis Periša wrote:
Hi all, I got this once before but sent it on RMA. anyhow, I did some flashing from jffs2 to ubifs and initramfs kernel image loaded up fine, but on sysupgrade it marked all my kernel filesystem as bad nand.. 0 space left. I know for sure this is just fake mark as I copied kernel just before in it and It happended before to me. ANY , ANY chance there is some nand tool that can re-check those blocks and recover it to zero state? thank you!
I've seen commands in uboot (popular bootloader) that can reset nand bad blocks, you would need to connect to serial console by soldering pins to the device's board and then using a TTL-USB dongle to connect your PC to it.
But if it keeps doing that it might be a bug in the OpenWrt firmware (that can't use the NAND properly and then marks it as bad).
Would be useful to state what is your device. -Alberto _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
