Hello Mathias,
On 05.11.2017 22:43, Mathias Kresin wrote:
05.11.2017 22:24, Piotr Dymacz:
[snip]
AFAIK, board with 256/16 MB is the default one (mass production?). Any
change means MOQ and customized version. The default one can be easily
purchased from Ali..., directly from the vendor.
It is the same as with some of the ZBT boards. They're advertised with
different RAM sizes, but so far all known boards have the same amount of
ram.
Not sure about the flash size. Especially for the ZBT boards it is known
that they are shipped with different sized flash chips.
I wouldn't be surprised if they change FLASH chips manually. And that's
why different versions are widely available :) For BGA DRAM chips they
probably run separate batch.
But since you pepe have a way better insight what the OEMs/ODMs tend to
do, it would be the best to follow your advice.
* I have assumed that the placement of wifi cards will be as on the
image on
the Unielec website linked to above.
I have problem with this and I don't know how we should proceed here
(Mathias, what do you think?).
Actually, the board by default comes without any Wi-Fi card installed
and they need to be ordered separately (if someone needs them at all).
Oh, I missed that detail.
Personally, I don't think we should force any type of card and/or order
in slots. The board comes with two miniPCIe slots which can be used for
almost anything. I've been testing it with ath9k and mt7603 based cards,
a different configuration than yours :)
I totally agree. If the board isn't ship with a particular set of
wireless cards, we shouldn't enforce anything.
OK, lets just find out what they actually put inside factory partition.
[snip]
Pepe, are you fine if I handle this patch over to you? Doesn't make much
sense to me if I do the review, while you are having the hardware.
Sure, I will take care of this one.
--
Cheers,
Piotr
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
