Hello Nerijus, Friday, July 21, 2017, 12:49:29 AM, you wrote: > 2017-07-21 00:36, Sergey Ryazanov rašė: >>> No received/sent packets on br-lan and eth0 before and after modprobe >>> mv88e6060.ko. >> >> Did you saw the "Marvel 88E6060 PHY driver attached" string in the >> kernel messages? If so then at least the driver detects switch chip. > > No. BTW, do I understand correctly - I have to use mv88e6060.ko which > should use CONFIG_MVSWITCH_PHY or is CONFIG_MVSWITCH_PHY alone enough?
You should disable CONFIG_NET_DSA_MV88E6060 and select only CONFIG_MVSWITCH_PHY=y option. This two different drivers, the first one is mainstream Linux driver, and the second one is OpenWRT specific driver, which is mach more simple and small. >> This driver uses VLAN tags to determine which port the frame should be >> sent from. Try to create couple of VLAN sub-interfaces on eth0 with ID >> 1 and 2 and work with them. > > I'll try. > >> And BTW do you use OpenWRT or LEDE and which version? > > Actually I use barrier breaker, as the device has only 16 MB RAM so > I thought an earlier version will use less resources. But I can try > later versions. Yes, use the latest version of LEDE, please, to avoid facing with long-forgotten bugs. -- Sergey _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
