On Montag, 5. Juni 2017 11:29:59 CEST Torbjorn Jansson wrote: > > so i don't know if i want to swap over to lede/openwrt permanently (more > or less) and it would have been really nice if you could have one of the > two running firmware as lede/openwrt and the other one as the built in > edgeos and then easily swap between them. > An relatively easy way to swap between EdgeOS and LEDE is using a initrd- kernel-image of LEDE. You just need to hookup a serial-console ten you can tftp this image on the board and it will be running in RAM-only. You will not have persistent storage, but as long as the board is powered it should all work.
> > if it was possible to easily run both and swap between them i would > change right away and give lede a try. > yes i know my way around electronics and can probably hookup the serial > port and get that working but helps if i don't have to and have an easy > way to fall back in case i screw-up I personally use dd to dump the mtd-partitions to another machine, to have them as backup. So you can revert to EgdeOS anytime, as long as uboot ist still running Sven _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
