On Thu, Mar 9, 2017 at 10:15 AM, K.Mani <sailorm...@gmail.com> wrote: > Hi Matthew, > > (IPQ40xx) # smeminfo > flash_type: 0x6 > flash_index: 0x0 > flash_chip_select: 0x0 > flash_block_size: 0x10000 > flash_density: 0x1000000 > partition table offset 0x0 > No.: Name Attributes Start Size > 0: 0:SBL1 0x0000ffff 0x0 0x40000 > 1: 0:MIBIB 0x001040ff 0x40000 0x20000 > 2: 0:QSEE 0x0000ffff 0x60000 0x60000 > 3: 0:CDT 0x0000ffff 0xc0000 0x10000 > 4: 0:DDRPARAMS 0x0000ffff 0xd0000 0x10000 > 5: 0:APPSBLENV 0x0000ffff 0xe0000 0x10000 > 6: 0:APPSBL 0x0000ffff 0xf0000 0x80000 > 7: 0:ART 0x0000ffff 0x170000 0x10000 > 8: 0:HLOS 0x0000ffff 0x180000 0x400000 > 9: rootfs 0x0000ffff 0x580000 0xa80000 > > Is this a nand or nor booting board? > Don't know. > > SF: MX25L25635E, it's spi-nor i guess.
Sounds right. > > If i have to flash 'initramfs', should it be on HLOS partition start address? > > Also attached a old boot log. No you can just load to memory and boot from there, no need to mess with flash at this point. -M _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
