I just rebuilt LEDE trunk on TL-WDR3600 with dnsmasq-full and odhcpd excluded. I also rebuilt LEDE trunk on TL-Archer-C7 which runs odhcpd+Unbound instead. The Archer is the internet gateway. The WDR is subnet from the Archer. The laptop sending this email is a client of the WDR. We have DHCP-PD to the laptop (until odhcpd flakes out and kills that route). The static ULA-domains and routes work [fd00::] around this and I can connect IP6 to any device in the network upstream or downstream. dnsmasq is handing out RA and DHCPv6 to the laptop.
Cabel -> Modem -> Archer (AP) -> WiFi -> (Client) WDR -> Wire -> Laptop If you build LEDE nearly default and later disable odhcpd, then don't forget to stop odhcpd or reboot the router. odhcpd will hold the port (547/548) and dnsmasq will not be able to obtain it. On 02/03/2017 04:46 PM, Eric Luehrsen wrote: > I will look at it this weekend. _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
