I will look at it this weekend. It seems that maybe some intermediate rebase-to-trunk event chewed up a line of code. The commit was lingering for quite a while. There is a report for another issue also. Its probably an esay fix, just need to stare at it for a while.
- Eric -------- Original message -------- From: Daniel Petre <daniel.pe...@gavana3.ro> Date: 2/3/17 05:26 (GMT-05:00) To: Eric Luehrsen <ericluehr...@hotmail.com>, Jo-Philipp Wich <j...@mein.io> Subject: Re: dnsmasq: make DHCPv6 viable for standalone dnsmasq install On 02/02/2017 07:52 PM, Eric Luehrsen wrote: > What I submitted I had tested on TL WDR3600 and TL Archer C7 ... working > together. The archer DHCP-PD with odhcpd to the Wdr with dnsmasq full. I only tried the dnsmasq-dhcpv6 and dnsmasq-full with only IPv6 selected. Should i compile in all dnsmasq options? > Also pulled from. JOW staging at some point to see ... but I may not > have tested any last minute fixup work. > > > > - Eric > > > -------- Original message -------- > From: Daniel Petre <daniel.pe...@gavana3.ro> > Date: 2/2/17 10:55 (GMT-05:00) > To: Eric Luehrsen <ericluehr...@hotmail.com>, Jo-Philipp Wich <j...@mein.io> > Subject: dnsmasq: make DHCPv6 viable for standalone dnsmasq install > > Hi, > are you sure your commit works..? Did you tested it? > >https://github.com/lede-project/source/commit/9525743c076393336cd2129539c974f8a01c7894 > > I have just removed odhcpd and tried both dnsmasq-dhcpv6 and the full > dnsmasq with ipv6 enabled without luck. No IPv6 is getting to my wifi > laptop from a nexx wt3020 router while the setup with odhcpd works just > fine. > > I have a /64 via PD on pppoe. > > Thanks! _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
