On 2017-01-11 12:59, Cezary Jackiewicz wrote: > Dnia 2017-01-11, o godz. 12:27:48 > Felix Fietkau <n...@nbd.name> napisał(a): > >> Seems that the upstream spi-rb4xx.c driver does not work as-is. I've >> pushed a less intrusive fix now. > > Looks good: > > [ 7.785083] m25p80 spi0.0: pm25lv512 (64 Kbytes) > [ 7.840505] Creating 4 MTD partitions on "spi0.0": > [ 7.897972] 0x000000000000-0x00000000b000 : "routerboot" > [ 7.966301] 0x00000000b000-0x00000000c000 : "hard_config" > [ 8.033912] 0x00000000d000-0x00000000f000 : "bios" > [ 8.094198] 0x00000000f000-0x000000010000 : "soft_config" > [ 8.161987] NAND flash driver for RouterBoard 4xx series version 0.2.0 > [ 8.240717] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 > [ 8.316902] nand: Samsung NAND 128MiB 3,3V 8-bit > [ 8.372244] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB > size: 64 > [ 8.463047] Scanning device for bad blocks > [ 8.999658] Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit": > [ 9.073823] 0x000000000000-0x000000040000 : "booter" > [ 9.135610] 0x000000040000-0x000000400000 : "kernel" > [ 9.197817] 0x000000400000-0x000008000000 : "ubi" > > Sysupgrade works fine - from initramfs and again after boot > from flash. (rb411u) Thanks for testing. I've pushed the driver fixes to master now.
- Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
