On 2017-01-11 10:19, Mathias Kresin wrote: > 11.01.2017 09:32, Felix Fietkau: >> On 2017-01-11 09:17, Cezary Jackiewicz wrote: >>> Dnia 2017-01-08, o godz. 14:54:33 >>> Felix Fietkau <n...@nbd.name> napisał(a): >>> >>>> Hi all, >>>> >>>> I've just pushed the code for converting ar71xx routerboard support to >>>> UBI + sysupgrade to my staging tree at: >>>> https://git.lede-project.org/?p=lede/nbd/staging.git;a=summary >>>> >>>> So far I've only managed to test it on RB 912UAG-5HPnD, other devices >>>> are still untested. If you have any affected hardware, please test the >>>> new code with a fresh build from that tree (make sure you reset your >>>> config) and let me know if it works. >>>> >>>> Installation is now done only over sysupgrade (from the initramfs >>>> image), the old wget2nand script and rootfs tarballs are gone. >>> >>> Boot from initramfs: >>> >>> RouterBoard 411U >>> >>> CPU frequency: 300 MHz >>> Memory size: 32 MiB >>> NAND size: 128 MiB >>> >>> Press any key within 2 seconds to enter setup >>> trying bootp protocol... OK >>> Got IP address: 192.168.1.134 >>> resolved mac address E8:11:32:99:3D:A0 >>> Gateway: 192.168.1.10 >>> transfer started ................................................ transfer >>> ok, time=2.79s >>> setting up elf image... OK >>> jumping to kernel code >>> [ 0.000000] Linux version 4.4.40 (cez...@eko.one.pl) (gcc version 5.4.0 >>> (LEDE GCC 5.4.0 r2900-e5aeb4a) ) #0 Tue Jan 10 17:18:04 2017 >>> [ 0.000000] bootconsole [early0] enabled >>> .... >>> [ 0.000000] Kernel command line: parts=1 boot_part_size=4194304 >>> gpio=1855 HZ=150000000 mem=32M kmac=4C:5E:0C:31:B3:F5 board=411U >>> hw_opt=00000000 boot=0 mlc=8 rootfstype=squashfs noinitrd >>> .... >>> >>> [ 7.784959] m25p80 spi0.0: pm25lv512 (64 Kbytes) >>> [ 7.840380] Creating 4 MTD partitions on "spi0.0": >>> [ 7.897848] 0x000000000000-0x00000000b000 : "routerboot" >>> [ 7.966111] 0x00000000b000-0x00000000c000 : "hard_config" >>> [ 8.033665] 0x00000000d000-0x00000000f000 : "bios" >>> [ 8.093852] 0x00000000f000-0x000000010000 : "soft_config" >>> [ 8.161543] NAND flash driver for RouterBoard 4xx series version 0.2.0 >>> [ 8.239896] rb4xx_nand: write cmd failed, err=-22 >>> [ 8.296268] rb4xx_nand: write cmd failed, err=-22 >>> [ 8.352640] rb4xx_nand: write cmd failed, err=-22 >>> [ 8.409041] rb4xx_nand: write cmd failed, err=-22 >>> [ 8.465399] rb4xx_nand: write cmd failed, err=-22 >>> [ 8.521847] nand: second ID read did not match ec,f1 against 41,ec >>> [ 8.595962] nand: No NAND device found >>> [ 8.655044] libphy: ag71xx_mdio: probed >> This does not look like it something caused by changes in my staging >> tree, it may already be present in LEDE master. Could you please verify >> that and if it's the case, use git bisect to track down the issue to an >> individual commit? > > Hey Felix, Hey Cezary, > > this bug is already reported in > https://bugs.lede-project.org/index.php?do=details&task_id=376. > > The reporter was able to track down the breakage to > https://git.lede-project.org/af79fdbe4af32a287798b579141204bda056b8aa > ("ar71xx: remove a non-upstream spi core patch") committed by felix. Thanks Mathias, that helps.
Cezary, please try the latest version from my staging tree, I just pushed a fix for this regression that should hopefully make it work again. - Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
