05.12.2016 03:43, J Mo:
On 12/01/2016 11:18 PM, Mathias Kresin wrote:
02.12.2016 06:28, J Mo:
On 11/27/2016 02:29 AM, Mathias Kresin wrote:
Can you please clarify what of my previous reply it is that you don't
understand so that I can do a better job of explaining it?
The problem is quite simple, I don't get how the signature created by
Build/cameo-sig should look like. And the way the signature is created
looks way to complex to me.
Mentioning that it's a cameo signature does not help at all, as long
as you don't provide a link to some kind of specification how this
signature format should look like.
I expect to see a human readable explantation of what the code should
do. Hence I asked you back in the days:
> Do you want to add the signature to a 64 byte padded image or should
> the image + signature padded to a multiple of 64byte? Where does the
> 64 byte does come from? It doesn't seam to be related to the 128k
> blocksize of the flash
With the new image build code, we have a lot of helper for doing
padding without the need of a single line of custom code. But as long
as I don't understand how the resulting signature should look
like/should be padded, I can not point you to the correct helper for
the job.
My requirements are the same as the Image/Build/Cameo target in
target/linux/ar71xx/image/legacy.mk.
There are two devices in particular which require a similar signature
method: TEW-632BRP (CameoAP81) and TEW-823DRU (CameoAP135). Both are
already in LEDE.
The TEW-632BRP (CameoAP81) is an ancient device from 2004. I just
happened to have two of them, so I was vaguely familiar with this
requirement before I acquired my new device.
The TEW-823DRU (CameoAP135) is both very recent and architecturally
similar to the tew827dru. It's also based on the same upstream source
(QSDK).
The makefile portion that I wrote was intended to duplicate the same
image generation functionality so that it would be useful for future
devices. I looked at existing tools prior to making my own and didn't
find anything that would do what I needed.
The image needs to be byte-aligned with the signature inside. The 64 was
backwards compatible with the old default from the old makefiles, but it
works for this device too. The actual blocksize is not relevant to my
device because of it being a FIT image.
Still not the answer I expected, but I got it.
target/linux/ar71xx/image/legacy.mk is for boards using the old image
build code (as indicated by the term legacy).
Board support patches creating images the old way or duplicating any
legacy stuff will not be accepted any more.
Please find a way to do the padding using the pad* helpers in
include/image-commands.mk. If patches still using the old image build
code were accepted in the past, it was a mistake.
You are aware that tools/firmware-utils has a mkcameofw? Not sure if
it's the same format you need.
Not applicable here and I'm not sure why you would bring it up.
Well that one is obvious to me. You are talking about an cameo signature
and I found a tool that creates a cameo firmware. But I even wrote that
I'm not sure if mkcameofw is related to the cameo signature or used for
something different.
Mathias
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
