On 17 October 2016 at 12:14, Gareth Parker <garet...@orcon.net.nz> wrote: > The Comfast E380AC is a single port PoE Dual Band AP. > > There are two versions which are only identifiable through the web > administration interface, v1 has 128mb ram and a uboot size of 128k, v2 has > 256mb ram and a uboot size of 256k, the remaining hardware and PCB markings > are the same.
Minor note: mb means milli-bits. You probably meant MiB which means mebi-bytes. https://en.wikipedia.org/wiki/Metric_prefix https://en.wikipedia.org/wiki/Binary_prefix > diff --git a/target/linux/ar71xx/base-files/etc/diag.sh > b/target/linux/ar71xx/base-files/etc/diag.sh > index d6e257d..c8e6b48 100644 > --- a/target/linux/ar71xx/base-files/etc/diag.sh > +++ b/target/linux/ar71xx/base-files/etc/diag.sh > @@ -82,6 +82,10 @@ get_status_led() { > cf-e316n-v2) > status_led="$board:blue:wan" > ;; > + cf-e380ac-v1|\ > + cf-e380ac-v2) > + status_led="cfe380ac:green" > + ;; > cpe510) > status_led="tp-link:green:link4" > ;; See comment below. > +static struct gpio_led cf_e380ac_leds_gpio[] __initdata = { > + { > + .name = "cfe380ac:red", > + .gpio = CF_E380AC_GPIO_LED_RED, > + .active_low = 0, > + }, > + { > + .name = "cfe380ac:green", > + .gpio = CF_E380AC_GPIO_LED_GREEN, > + .active_low = 0, > + }, > + { > + .name = "cfe380ac:blue", > + .gpio = CF_E380AC_GPIO_LED_BLUE, > + .active_low = 0, > + }, > + > +}; What about functions of these LEDs? Take a look at Documentation/leds/leds-class.txt, you should be using "devicename:colour:function". _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
