The Comfast E380AC is a single port PoE Dual Band AP.
There are two versions which are only identifiable through the web
administration interface, v1 has 128mb ram and a uboot size of 128k, v2 has
256mb ram and a uboot size of 256k, the remaining hardware and PCB markings are
the same.
The factory firmware is built on openwrt and will accept a sysupgrade file,
this patch produces two sysupgrade files for both versions.
Signed-off-by: Gareth Parker <garet...@orcon.net.nz>
---
target/linux/ar71xx/base-files/etc/diag.sh | 4 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 5 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 12 ++
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c | 197 ++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 2 +
target/linux/ar71xx/image/generic.mk | 18 ++
10 files changed, 256 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index d6e257d..c8e6b48 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -82,6 +82,10 @@ get_status_led() {
cf-e316n-v2)
status_led="$board:blue:wan"
;;
+ cf-e380ac-v1|\
+ cf-e380ac-v2)
+ status_led="cfe380ac:green"
+ ;;
cpe510)
status_led="tp-link:green:link4"
;;
diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 0e93feb..7598a83 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,6 +47,11 @@ board=$(ar71xx_board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ cf-e380ac-v1 | \
+ cf-e380ac-v2)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat
/sys/class/net/eth0/address) +3)
+ ;;
dlan-pro-1200-ac)
ath10kcal_extract "art" 20480 2116
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index dae6fb2..fb017f5 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -488,6 +488,12 @@ ar71xx_board_detect() {
*"COMFAST CF-E316N v2")
name="cf-e316n-v2"
;;
+ *"COMFAST CF-E380AC-V1")
+ name="cf-e380ac-v1"
+ ;;
+ *"COMFAST CF-E380AC-V2")
+ name="cf-e380ac-v2"
+ ;;
*"CPE210/220")
name="cpe210"
tplink_pharos_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 559f97d..2463587 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -495,6 +495,16 @@ platform_check_image() {
alfa_check_image "$1" && return 0
return 1
;;
+
+ cf-e380ac-v1|\
+ cf-e380ac-v2)
+ [ "$magic_long" != "27051956" ] && {
+ echo "Invalid image type."
+ return 1
+ }
+ return 0
+ ;;
+
wndr3700|\
wnr1000-v2|\
wnr2000-v3|\
@@ -597,6 +607,8 @@ platform_do_upgrade() {
om5p)
platform_do_upgrade_openmesh "$ARGV"
;;
+ cf-e380ac-v1|\
+ cf-e380ac-v2|\
uap-pro|\
unifi-outdoor-plus)
MTD_CONFIG_ARGS="-s 0x180000"
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 7aeac89..9232c4c 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -60,6 +60,7 @@ CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
+CONFIG_ATH79_MACH_CF_E380AC=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 4cefde1..340d6f3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1623,6 +1623,16 @@ config ATH79_MACH_CF_E316N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_CF_E380AC
+ bool "COMFAST CF-E380AC board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_BHU_BXU2000N2_A
bool "BHU BXU2000n-2 rev. A support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 5e7a811..e364dbe 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATH79_MACH_CAP324) +=
mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CF_E380AC) += mach-cf-e380ac.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
new file mode 100644
index 0000000..47a848c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
@@ -0,0 +1,197 @@
+/*
+ * COMFAST cf-e380ac board support
+ *
+ * There are two versions for this board, the only difference being v1 has
+ * a u-boot size of 128k and v2 has a u-boot size of 256k. The hardware
+ * is the same. Version numbers are printed in the factory firmware web
+ * administration.
+ *
+ * Copyright (C) 2016 Gareth Parker <garet...@orcon.net.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "dev-nfc.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define CF_E380AC_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CF_E380AC_KEYS_DEBOUNCE_INTERVAL (3 * CF_E380AC_KEYS_POLL_INTERVAL)
+
+#define CF_E380AC_GPIO_WATCHDOG 17
+
+#define CF_E380AC_GPIO_BTN_RESET_WPS 19
+
+#define CF_E380AC_GPIO_LED_RED 3
+#define CF_E380AC_GPIO_LED_GREEN 0
+#define CF_E380AC_GPIO_LED_BLUE 2
+
+#define CF_E380AC_WMAC_CALDATA_OFFSET 0x1000
+#define CF_E380AC_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led cf_e380ac_leds_gpio[] __initdata = {
+ {
+ .name = "cfe380ac:red",
+ .gpio = CF_E380AC_GPIO_LED_RED,
+ .active_low = 0,
+ },
+ {
+ .name = "cfe380ac:green",
+ .gpio = CF_E380AC_GPIO_LED_GREEN,
+ .active_low = 0,
+ },
+ {
+ .name = "cfe380ac:blue",
+ .gpio = CF_E380AC_GPIO_LED_BLUE,
+ .active_low = 0,
+ },
+
+};
+
+static struct gpio_keys_button cf_e380ac_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button/WPS button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CF_E380AC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CF_E380AC_GPIO_BTN_RESET_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct at803x_platform_data cf_e380ac_at803x_data = {
+ .disable_smarteee = 1,
+};
+
+static struct mdio_board_info cf_e380ac_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &cf_e380ac_at803x_data,
+ },
+};
+
+static struct timer_list gpio_watchdog;
+
+static void gpio_watchdog_init(unsigned long period)
+{
+ static int state;
+ state = !state;
+ gpio_set_value(CF_E380AC_GPIO_WATCHDOG, state);
+ mod_timer(&gpio_watchdog, jiffies + period);
+}
+
+static void __init cf_e380ac_v1_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f020000);
+ u8 wlan0_mac[ETH_ALEN];
+ u8 wlan1_mac[ETH_ALEN];
+
+ gpio_request(CF_E380AC_GPIO_WATCHDOG, "watchdog init");
+ gpio_direction_output(CF_E380AC_GPIO_WATCHDOG, 0);
+ setup_timer(&gpio_watchdog, gpio_watchdog_init, msecs_to_jiffies(500));
+ gpio_watchdog_init(msecs_to_jiffies(1));
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_leds_gpio),
+ cf_e380ac_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CF_E380AC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cf_e380ac_gpio_keys),
+ cf_e380ac_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_init_mac(wlan0_mac, art, 1);
+ ath79_init_mac(wlan1_mac, art, 3);
+
+ ath79_register_wmac(art + CF_E380AC_WMAC_CALDATA_OFFSET, wlan0_mac);
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(cf_e380ac_mdio0_info,
+ ARRAY_SIZE(cf_e380ac_mdio0_info));
+
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_pll_data.pll_10 = 0xB0001313;
+ ath79_eth0_pll_data.pll_100 = 0xB0000101;
+ ath79_eth0_pll_data.pll_1000 = 0xBE000000;
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_register_eth(0);
+
+ ap91_pci_init(art + CF_E380AC_PCIE_CALDATA_OFFSET, wlan1_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST CF-E380AC-V1",
+ cf_e380ac_v1_setup);
+
+static void __init cf_e380ac_v2_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
+ u8 wlan0_mac[ETH_ALEN];
+ u8 wlan1_mac[ETH_ALEN];
+
+ gpio_request(CF_E380AC_GPIO_WATCHDOG, "watchdog init");
+ gpio_direction_output(CF_E380AC_GPIO_WATCHDOG, 0);
+ setup_timer(&gpio_watchdog, gpio_watchdog_init, msecs_to_jiffies(500));
+ gpio_watchdog_init(msecs_to_jiffies(1));
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_leds_gpio),
+ cf_e380ac_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CF_E380AC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cf_e380ac_gpio_keys),
+ cf_e380ac_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_init_mac(wlan0_mac, art, 1);
+ ath79_init_mac(wlan1_mac, art, 3);
+
+ ath79_register_wmac(art + CF_E380AC_WMAC_CALDATA_OFFSET, wlan0_mac);
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(cf_e380ac_mdio0_info,
+ ARRAY_SIZE(cf_e380ac_mdio0_info));
+
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_pll_data.pll_10 = 0xB0001313;
+ ath79_eth0_pll_data.pll_100 = 0xB0000101;
+ ath79_eth0_pll_data.pll_1000 = 0xBE000000;
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_register_eth(0);
+
+ ap91_pci_init(art + CF_E380AC_PCIE_CALDATA_OFFSET, wlan1_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST CF-E380AC-V2",
+ cf_e380ac_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index e3611dc..d5fc5fd 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -51,6 +51,8 @@ enum ath79_mach_type {
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
+ ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC-V1 */
+ ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC-V2 */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
diff --git a/target/linux/ar71xx/image/generic.mk
b/target/linux/ar71xx/image/generic.mk
index 0307b26..43c2d62 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -27,6 +27,24 @@ define Device/cf-e316n-v2
endef
TARGET_DEVICES += cf-e316n-v2
+define Device/cf-e380ac-v1
+ DEVICE_TITLE := COMFAST CF-E380AC-V1
+ BOARDNAME = CF-E380AC-V1
+ IMAGE_SIZE = 16128k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e380ac-v1
+
+define Device/cf-e380ac-v2
+ DEVICE_TITLE := COMFAST CF-E380AC-V2
+ BOARDNAME = CF-E380AC-V2
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e380ac-v2
+
define Device/weio
DEVICE_TITLE := WeIO
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
--
1.7.9.5
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
