Hey Stijn, Thanks for the feedback, will get this fixed up for the next RFC as well.
Please keep the feedback coming. :) - Chris B On Sat, Oct 15, 2016 at 9:41 AM, Stijn Tintel <st...@linux-ipv6.be> wrote: > On 14-10-16 20:19, Chris Blake wrote: >> The following patch adds support for the PC Engines APU2 Embedded Board >> as a profile under the X86_64 target. More information on this board can >> be found at www.pcengines.ch/apu2c4.htm >> >> Note that this patch is a part of an RFC, and should not be merged yet. >> >> Signed-off-by: Chris Blake <chrisrblak...@gmail.com> >> --- >> target/linux/x86/64/config-default | 12 + >> target/linux/x86/64/profiles/001-PCEngines.mk | 20 + >> target/linux/x86/base-files/etc/board.d/01_leds | 22 ++ >> target/linux/x86/base-files/etc/board.d/02_network | 26 ++ >> target/linux/x86/base-files/etc/diag.sh | 37 ++ >> target/linux/x86/base-files/lib/x86.sh | 13 + >> target/linux/x86/config-4.4 | 1 + >> .../linux/x86/files/drivers/gpio/gpio-nct5104d.c | 432 >> +++++++++++++++++++++ >> target/linux/x86/files/drivers/leds/leds-apu2.c | 371 ++++++++++++++++++ >> target/linux/x86/modules.mk | 36 ++ >> .../x86/patches-4.4/800-add-apu2-led-driver.patch | 29 ++ >> .../801-sp5100_tco-add-apu2-support.patch | 91 +++++ >> .../patches-4.4/802-add-nct5104d-gpio-driver.patch | 27 ++ >> 13 files changed, 1117 insertions(+) >> create mode 100644 target/linux/x86/64/profiles/001-PCEngines.mk >> create mode 100755 target/linux/x86/base-files/etc/board.d/01_leds >> create mode 100755 target/linux/x86/base-files/etc/board.d/02_network >> create mode 100755 target/linux/x86/base-files/etc/diag.sh >> create mode 100755 target/linux/x86/base-files/lib/x86.sh >> create mode 100644 target/linux/x86/files/drivers/gpio/gpio-nct5104d.c >> create mode 100644 target/linux/x86/files/drivers/leds/leds-apu2.c >> create mode 100644 target/linux/x86/modules.mk >> create mode 100644 >> target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch >> create mode 100644 >> target/linux/x86/patches-4.4/801-sp5100_tco-add-apu2-support.patch >> create mode 100644 >> target/linux/x86/patches-4.4/802-add-nct5104d-gpio-driver.patch > Please use the correct prefix for patches, see > https://git.lede-project.org/?p=source.git;a=blob;f=target/linux/generic/PATCHES > I would add the watchdog patches like this instead of squashing them, > created with git format-patch: > target/linux/generic/patches-4.4/097-0001-sp5100_tco-Add-AMD-Mullins-platform-support.patch > target/linux/generic/patches-4.4/097-0002-sp5100_tco-Add-AMD-Mullins-platform-support.patch > target/linux/generic/patches-4.4/097-0003-sp5100_tco-fix-the-device-check-for-SB800-and-later-chipsets.patch > target/linux/generic/patches-4.4/097-0004-watchdog-sp5100_tco-properly-check-for-new-register-.patch > > Thanks, > Stijn _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
