This is an RFC to port the PC Engines APU2 board to LEDE. Currently this is based on my unofficial repo at https://github.com/riptidewave93/LEDE-APU2 and after a discussion on the lede-dev IRC on the best plan of action, which was to move this device to a profile under x86_64.
Things Working: - board detection - USB ports - LED/Button support - ath9k and ath10k - to support both wireless cards sold via PC Engines - SP5100 Watchdog - NCT5104D GPIO Driver Not Working: - AES-NI CPU Acceleration - PC Buzzer Default Packages: - flashrom - BIOS Upgrades - lm-sensors - Temp Monitoring - wpad-mini - Wireless AP support - hwclock - RTC support Things that still need working out: - AES-NI Kernel Support - Profile Specific Images - So far the ./image/Makefile does not seem to support 'profiles'. This will need to be fixed, so APU2 & Generic images can build without merging. - HWMon & ath10k - ath10k requires hwmon, but the module fails to build if hwmon was built as a module. Because if this, it's added to the kernel config. Is there a better way to do this, or a way around this problem? - pc buzzer/beep - Busybox has beep support, but I didn't find a way to build it without changing the default BusyBox config for all targets. Maybe "beep" should also be added as a standalone package? https://lists.openwrt.org/pipermail/openwrt-devel/2009-November/005227.html - x86_64 kernel config - Besudes hwmon, GPIO support had to be added. Should this be done here, or in the root target kernel config like other targets? Also, DEVMEM was added for flashrom. Is this an issue, or would it be OK to keep this in? - Default Packages - Currently the "goal" of my unofficial port was to make sure all features of the device were supported via my image. Is this the path LEDE wants to take, or should it be more of a "minimal" approach? AKA, no packages/ath*k If there are any comments, suggestions, or visible improvements please let me know/reply with some patches. Cc: Jo-Philipp Wich <j...@mein.io> Signed-off-by: Chris Blake <chrisrblak...@gmail.com> Chris Blake (1): x86: Add support for the PC Engines APU2 Board target/linux/x86/64/config-default | 12 + target/linux/x86/64/profiles/001-PCEngines.mk | 20 + target/linux/x86/base-files/etc/board.d/01_leds | 22 ++ target/linux/x86/base-files/etc/board.d/02_network | 26 ++ target/linux/x86/base-files/etc/diag.sh | 37 ++ target/linux/x86/base-files/lib/x86.sh | 13 + target/linux/x86/config-4.4 | 1 + .../linux/x86/files/drivers/gpio/gpio-nct5104d.c | 432 +++++++++++++++++++++ target/linux/x86/files/drivers/leds/leds-apu2.c | 371 ++++++++++++++++++ target/linux/x86/modules.mk | 36 ++ .../x86/patches-4.4/800-add-apu2-led-driver.patch | 29 ++ .../801-sp5100_tco-add-apu2-support.patch | 91 +++++ .../patches-4.4/802-add-nct5104d-gpio-driver.patch | 27 ++ 13 files changed, 1117 insertions(+) create mode 100644 target/linux/x86/64/profiles/001-PCEngines.mk create mode 100755 target/linux/x86/base-files/etc/board.d/01_leds create mode 100755 target/linux/x86/base-files/etc/board.d/02_network create mode 100755 target/linux/x86/base-files/etc/diag.sh create mode 100755 target/linux/x86/base-files/lib/x86.sh create mode 100644 target/linux/x86/files/drivers/gpio/gpio-nct5104d.c create mode 100644 target/linux/x86/files/drivers/leds/leds-apu2.c create mode 100644 target/linux/x86/modules.mk create mode 100644 target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch create mode 100644 target/linux/x86/patches-4.4/801-sp5100_tco-add-apu2-support.patch create mode 100644 target/linux/x86/patches-4.4/802-add-nct5104d-gpio-driver.patch -- 2.7.4 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
